I need help getting my internal SD reader to mount my sd card

[blackmachismo]

I'm sorry to ask this, for the last 3 days I'm been trying to get my SD internal reader on my Lenovo Y700 to mount my sd card. It works on windows really well but however on Kubuntu or ubuntu not at all. I'm tried googling the drivers however I get the same link to this site which by the way doesn't give me anyway clue to install it or some 4 page instruction read I don't have the time for. Can anyone here please give me a very simple guide to follow to install the right drivers for internal sd reader?

[vinnywright]

can you show a

lspci -v

hear .

dose a device notifier not pop up when you put a card in it ?

and what ver. of Kubuntu are you on ?

VINNY

[blackmachismo]

can you show a

lspci -v

hear .

dose a device notifier not pop up when you put a card in it ?

and what ver. of Kubuntu are you on ?

VINNY

it does not

[blackmachismo]

I got this

00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
Subsystem: Lenovo Skylake Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07) (prog-if 0
0 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 122
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 93000000-93ffffff
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06
) (prog-if 00 [VGA controller])
Subsystem: Lenovo Skylake Integrated Graphics
Flags: bus master, fast devsel, latency 0, IRQ 130
Memory at 92000000 (64-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915_bpo
Kernel modules: i915_bpo

00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 3
1) (prog-if 30 [XHCI])
Subsystem: Lenovo Sunrise Point-H USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 126
Memory at 94300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31
)
Subsystem: Lenovo Sunrise Point-H CSME HECI
Flags: bus master, fast devsel, latency 0, IRQ 131
Memory at 9432a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (
rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Sunrise Point-H SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 127
Memory at 94328000 (32-bit, non-prefetchable) [size=8K]
Memory at 9432d000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5080 [size=8]
I/O ports at 5088 [size=4]
I/O ports at 5060 [size=32]
Memory at 9432b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: 94200000-942fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 124
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: 94100000-941fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 125
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 94000000-940fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
Subsystem: Lenovo Sunrise Point-H LPC Controller
Flags: bus master, medium devsel, latency 0

00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
Subsystem: Lenovo Sunrise Point-H PMC
Flags: bus master, fast devsel, latency 0
Memory at 94324000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
Subsystem: Lenovo Sunrise Point-H HD Audio
Flags: bus master, fast devsel, latency 32, IRQ 132
Memory at 94320000 (64-bit, non-prefetchable) [size=16K]
Memory at 94310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
Subsystem: Lenovo Sunrise Point-H SMBus
Flags: medium devsel, IRQ 11
Memory at 9432c000 (64-bit, non-prefetchable) [size=256]
I/O ports at 5040 [size=32]
Kernel modules: i2c_i801

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
Subsystem: Lenovo GM107M [GeForce GTX 960M]
Flags: bus master, fast devsel, latency 0, IRQ 129
Memory at 93000000 (32-bit, non-prefetchable) [size=16M]
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nvidiafb, nouveau

07:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-
if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 94201000 (32-bit, non-prefetchable) [size=4K]
Memory at 94200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

08:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
Subsystem: Intel Corporation Wireless 8260
Flags: bus master, fast devsel, latency 0, IRQ 133
Memory at 94100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Expre
ss Gigabit Ethernet Controller (rev 15)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 128
I/O ports at 3000 [size=256]
Memory at 94004000 (64-bit, non-prefetchable) [size=4K]
Memory at 94000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

[vinnywright]

looks like a driver is loaded for it ,,and the system sees it .

what ver. of Kubuntu ?

and do you have the device notifier in the system tray ?

if you put in a sd card and open dolphin do you see it in the "places" pane ,,,,,with the other drives?

VINNY

[blackmachismo]

looks like a driver is loaded for it ,,and the system sees it .

what ver. of Kubuntu ?

and do you have the device notifier in the system tray ?

if you put in a sd card and open dolphin do you see it in the "places" pane ,,,,,with the other drives?

VINNY

im using 16.04. i dont see it at all

[vinnywright]

im using 16.04. i dont see it at all

dont see what,,,,,,,,,the device notifyier in the system tray ,,,,,,,or the sd drive in dolphin's places panel,,,,,,,,,or both

put a sd card in ,,,,open a konsole ,,,,,,,,enter

sudo parted -l

post the output .

we are looking for something like this

vinny@vinny-Bonobo-Extreme:~$ sudo parted -l
[sudo] password for vinny: 
Model: ATA HGST HTS725050A7 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags: 

Number  Start   End    Size    Type      File system     Flags
 1      8225kB  323GB  323GB   primary   ext4            boot
 3      323GB   379GB  56.3GB  primary   ext4
 4      379GB   496GB  117GB   extended
 6      379GB   436GB  57.0GB  logical   ext4
 5      436GB   496GB  59.8GB  logical   ext4
 2      496GB   500GB  4295MB  primary   linux-swap(v1)


Model: ATA HGST HTS721010A9 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size    File system  Name     Flags
 1      1049kB  1000GB  1000GB  btrfs        primary


[COLOR=#ff0000]Model: SD Lexar (sd/mmc)
Disk /dev/mmcblk0: 999MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start   End    Size   Type     File system  Flags
 1      66.0kB  999MB  999MB  primary  fat16        boot[/COLOR]

I am on 16.04 as well ATM

VINNY

[vinnywright]

and in dolphin it should show as the entry under the cursor hear



VINNY

[blackmachismo]

Model: ATA WDC WD10SPCX-24H (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 473MB 472MB ntfs Basic data partition hidden, di
ag
2 473MB 578MB 105MB fat32 EFI system partition boot, esp
3 578MB 595MB 16.8MB Microsoft reserved partition msftres
4 595MB 502GB 502GB ntfs Basic data partition msftdata
5 502GB 512GB 10.0GB linux-swap(v1)
6 512GB 1000GB 488GB ext4


I don't see it mounted. I have a 64g SD Card.


I have this error:

An error occurred while accessing 'Home', the system responded: The requested operation has failed: Error mounting /dev/sda4 at /media/sanmonocobra/AA700C79700C4F0F: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=100 0" "/dev/sda4" "/media/sanmonocobra/AA700C79700C4F0F"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sda4': Operation not permitted
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.

[oshunluvr]

Any relevant info in dmesg? You should see a list of messages at insert. If you're not familiar;

With the card out of the machine, open a terminal
Type dmesg
Note the end of the output
Insert the card
Type dmesg again
Post any new lines that appear

You should see at least something like:

[161512.206774] sd 6:0:0:2: [sdd] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB)
[161512.212164]  sdd: sdd1

[blackmachismo]

I reformatted my harddrive and only install kubuntu without windows. I still can't mount my SD.

00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
Subsystem: Lenovo Skylake Host Bridge/DRAM Registers
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07) (prog-if 0
0 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 122
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 93000000-93ffffff
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06
) (prog-if 00 [VGA controller])
Subsystem: Lenovo Skylake Integrated Graphics
Flags: bus master, fast devsel, latency 0, IRQ 130
Memory at 92000000 (64-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915_bpo
Kernel modules: i915_bpo

00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 3
1) (prog-if 30 [XHCI])
Subsystem: Lenovo Sunrise Point-H USB 3.0 xHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 126
Memory at 94300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31
)
Subsystem: Lenovo Sunrise Point-H CSME HECI
Flags: bus master, fast devsel, latency 0, IRQ 131
Memory at 9432a000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (
rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Sunrise Point-H SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 127
Memory at 94328000 (32-bit, non-prefetchable) [size=8K]
Memory at 9432d000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5080 [size=8]
I/O ports at 5088 [size=4]
I/O ports at 5060 [size=32]
Memory at 9432b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 123
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: 94200000-942fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 124
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: 94100000-941fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 125
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 94000000-940fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
Subsystem: Lenovo Sunrise Point-H LPC Controller
Flags: bus master, medium devsel, latency 0

00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
Subsystem: Lenovo Sunrise Point-H PMC
Flags: bus master, fast devsel, latency 0
Memory at 94324000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
Subsystem: Lenovo Sunrise Point-H HD Audio
Flags: bus master, fast devsel, latency 32, IRQ 133
Memory at 94320000 (64-bit, non-prefetchable) [size=16K]
Memory at 94310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
Subsystem: Lenovo Sunrise Point-H SMBus
Flags: medium devsel, IRQ 11
Memory at 9432c000 (64-bit, non-prefetchable) [size=256]
I/O ports at 5040 [size=32]
Kernel modules: i2c_i801

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
Subsystem: Lenovo GM107M [GeForce GTX 960M]
Flags: bus master, fast devsel, latency 0, IRQ 129
Memory at 93000000 (32-bit, non-prefetchable) [size=16M]
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nvidiafb, nouveau

07:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-
if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 94201000 (32-bit, non-prefetchable) [size=4K]
Memory at 94200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

08:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
Subsystem: Intel Corporation Wireless 8260
Flags: bus master, fast devsel, latency 0, IRQ 132
Memory at 94100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Expre
ss Gigabit Ethernet Controller (rev 15)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 128
I/O ports at 3000 [size=256]
Memory at 94004000 (64-bit, non-prefetchable) [size=4K]
Memory at 94000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

[blackmachismo]

Any relevant info in dmesg? You should see a list of messages at insert. If you're not familiar;

With the card out of the machine, open a terminal
Type dmesg
Note the end of the output
Insert the card
Type dmesg again
Post any new lines that appear

You should see at least something like:

[161512.206774] sd 6:0:0:2: [sdd] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB)
[161512.212164]  sdd: sdd1

I don't see any of that.
[22558.145151] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[22558.146994] mmc0: tuning execution failed
[22558.147002] mmc0: error -5 whilst initialising SD card
[22558.509199] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[22558.511025] mmc0: tuning execution failed
[22558.511035] mmc0: error -5 whilst initialising SD card
[22558.877191] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[22558.879016] mmc0: tuning execution failed
[22558.879026] mmc0: error -5 whilst initialising SD card
[22559.289126] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[22559.290952] mmc0: tuning execution failed
[22559.290960] mmc0: error -5 whilst initialising SD card
[22621.231856] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[22621.335295] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
[22621.384408] nouveau 0000:01:00.0: DRM: resuming client object trees...
[22626.415570] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Foun
d [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[22626.415820] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[22626.415832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Foun
d [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[22626.417067] nouveau 0000:01:00.0: DRM: evicting buffers...
[22626.417076] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[22626.417098] nouveau 0000:01:00.0: DRM: suspending client object trees...
[22626.418646] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[23014.347206] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[23014.349029] mmc0: tuning execution failed
[23014.349042] mmc0: error -5 whilst initialising SD card
[23014.711260] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[23014.713083] mmc0: tuning execution failed
[23014.713091] mmc0: error -5 whilst initialising SD card
[23015.087245] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[23015.089070] mmc0: tuning execution failed
[23015.089081] mmc0: error -5 whilst initialising SD card
[23015.483337] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning proc
edure, falling back to fixed sampling clock
[23015.485163] mmc0: tuning execution failed
[23015.485174] mmc0: error -5 whilst initialising SD card

[vinnywright]

try this ,,,,,,,,,, at the grub menu befor trying to boot ,,,,but with the top line highlighted ,,,,press "e" to eddit the boot line ,,,,navagate the curser "_" to a space right after "quiet splash" in the "linux" line .

type in this "sdhci.debug_quirks2=0x4" then press "ctrl+x" ,,,,,,,,after your booted try the card .

their seams to be a regression in the newer kernels that brakes your card reader .

if this works we can make it permanent ,,,doing it this way is a one time test.

VINNY

[blackmachismo]

I don't have a grub menu anymore

[vinnywright]

and why is this ,,,,,,,,, if it's booting you strate in ,,,,,,then ,,,,,power off ,,,,,,repower and start taping the shift key ,,,,,,it (should) show.

VINNY