New install nodesktop just a blank screen with mouse pointer

[lurch]

Hi
I have installed 9.10 fresh install not upgrade.
I have the following problem
Start and choose normal user log in I get the the normal splash screen the desktop starts and then goes to a black screen with the mouse pointer (looks like a blank screen saver) something must be working as I get the startup music and a box asking about deleting pulse audio.
If i choose recovery login and login as root I can startx from the command line and get a working desktop.
/var/log/Xorg.log does not show any problems.
I have tried most of the remedies listed on the forum
Any help would be appreciated
lurch

[Schreiberling]

Re: New install nodesktop just a blank screen with mouse pointer

Hi, I have a similar problem. I installed the program partitionmanager, and the next time I logged in I got the splash screen with the KDE loading animations, but after that no desktop appeared, only the blue background image and some error messages from failed executions of partitionmanager. I don't know whether partitionmanager could actually cause that or whether there's another reason. I'm still able to execute programs, by using Alt+F2, I just don't get the bar at the bottom nor the KDE menu or any of the stuff on the desktop - it just appears as if it's not being loaded for some reason. Kubuntu looks better than ever, but I really wonder how many years I still have to wait until Linux becomes an actually working operating system (no fixes at the console, no additional flash and codec installing).

[dibl]

Re: New install nodesktop just a blank screen with mouse pointer

I really wonder how many years I still have to wait until Linux becomes an actually working operating system (no fixes at the console, no additional flash and codec installing).

Hmmmmmmmmmmm.

What exactly was the problem that required "partitionmanager" as the solution? What kind of operating system was running before you needed to install partitionmanager? What was wrong with it?

Are you suggesting there are other operating systems out there that tolerate random diddling of hard drive partitions while running, with no instability or breakage?

Bogus, bogus, bogus!

Kubuntu Linux is certainly far from perfect, but this is no legitimate complaint.


@lurch, have a look at #2 on my FAQs in my signature.

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer

Hi
Thanks for the reply
I have been using Ubuntu on and off since it started I abandoned Windoze at 98.
I have used Kubuntu exclusivly since Breezy Badger and have not had any real problems.
I have installed XFCE and that works fine.
This is one of the things I like about Linux there is always a way around the problem.
Thanks
Lurch

[Snowhog]

Re: New install nodesktop just a blank screen with mouse pointer

But have you solved the issues stated in your post? If 'no,' please provide us with the specs of your PC, to include the make/model of your video card.

[Schreiberling]

Re: New install nodesktop just a blank screen with mouse pointer

Hmmmmmmmmmmm.

What exactly was the problem that required "partitionmanager" as the solution? What kind of operating system was running before you needed to install partitionmanager? What was wrong with it?

Are you suggesting there are other operating systems out there that tolerate random diddling of hard drive partitions while running, with no instability or breakage?

Bogus, bogus, bogus!

Kubuntu Linux is certainly far from perfect, but this is no legitimate complaint.

I didn't even use partitionmanager, just installed it as I said. This should not cause any troubles. It's not even sure that it's the cause, just wanted to mention that too. I had to install partitionmanager in the first place since Kubuntu obviously lacks the "Disk and filesystems" options in the system preferences in order to get your windows partitions mounted the way you want. Yes, this is a legitimate complaint.

[Guest]

Re: New install nodesktop just a blank screen with mouse pointer

Hi guys,
I have upgraded from Kubuntu 9.04 to 9.10 and I have the same problem.
Boot --> Login --> Splash Screen --> Blank Screen

I just can use ALT+F2 to run application.

Any idea ?

thanks in advance

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer

Hi
I installed XFCE which allowed me to access the desktop and reinstall Evolution and Firefox to access my E-mails etc.
I will pursue this farther tomorrow and post details of my video card etc.
lurch

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer

Hi
Bright and early on a wet Monday morning in the U.K.

My machine is homebuilt with the following Asrock939A8XM motherboard, ATHLON64 4000+ processor, 2Gib memory, Geforce 7800 GS card 256mb ram and a Dell E173FP display.

Further to my problem.
The live c.d. works fine, as does startx from the command prompt in recovery mode I can also log in to the console from the login screen this allowed me to install XFCE.
Installing the XFCE desktop allowed me to access the desktop and after installing Firefox and Evolution the internet and my e-mails.

I did not have any problems with 9.04, I had some effects enabled with 9.04 one of which was exploding windows

This appears to be happening with the startup and the following are the steps that happen.

Start the machine it goes through the steps O.K. until the log in screen.

Enter name and password the Kubuntu splash screen starts and goes through its routine that closes and KDE starts to load it the does the exploding windows trick with the desktop and I am left with a black sreen and a mouse pointer.

Best regards
lurch

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer

Hi
I have attached part of the Ksystem log it talks about not being able to find /proc/840/environ is this the problem?


02/11/2009 14:38:10 kensbox kernel [ 1.131639] FDC 0 is a post-1991 82077
02/11/2009 14:38:10 kensbox kernel [ 1.289127] usb 2-1: configuration #1 chosen from 1 choice
02/11/2009 14:38:10 kensbox kernel [ 1.319950] usbcore: registered new interface driver hiddev
02/11/2009 14:38:10 kensbox kernel [ 1.333132] input: Saitek Saitek X45 as /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0/input/input4
02/11/2009 14:38:10 kensbox kernel [ 1.333198] generic-usb 0003:06A3:053C.0001: input,hidraw0: USB HID v1.00 Joystick [Saitek Saitek X45] on usb-0000:00:0f.0-1/input0
02/11/2009 14:38:10 kensbox kernel [ 1.333222] usbcore: registered new interface driver usbhid
02/11/2009 14:38:10 kensbox kernel [ 1.333226] usbhid: v2.6:USB HID core driver
02/11/2009 14:38:10 kensbox kernel [ 2.445568] PM: Starting manual resume from disk
02/11/2009 14:38:10 kensbox kernel [ 2.445572] PM: Resume from partition 8:21
02/11/2009 14:38:10 kensbox kernel [ 2.445574] PM: Checking hibernation image.
02/11/2009 14:38:10 kensbox kernel [ 2.445738] PM: Resume from disk failed.
02/11/2009 14:38:10 kensbox kernel [ 2.481468] kjournald starting. Commit interval 5 seconds
02/11/2009 14:38:10 kensbox kernel [ 2.481481] EXT3-fs: mounted filesystem with writeback data mode.
02/11/2009 14:38:10 kensbox kernel [ 3.384979] type=1505 audit(1257172685.243:2): operation="profile_load" pid=406 name=/sbin/dhclient3
02/11/2009 14:38:10 kensbox kernel [ 3.385230] type=1505 audit(1257172685.243:3): operation="profile_load" pid=406 name=/usr/lib/NetworkManager/nm-dhcp-client.action
02/11/2009 14:38:10 kensbox kernel [ 3.385368] type=1505 audit(1257172685.243:4): operation="profile_load" pid=406 name=/usr/lib/connman/scripts/dhclient-script
02/11/2009 14:38:10 kensbox kernel [ 3.409174] type=1505 audit(1257172685.263:5): operation="profile_load" pid=408 name=/usr/lib/cups/backend/cups-pdf
02/11/2009 14:38:10 kensbox kernel [ 3.409483] type=1505 audit(1257172685.263:6): operation="profile_load" pid=408 name=/usr/sbin/cupsd
02/11/2009 14:38:10 kensbox kernel [ 3.424034] type=1505 audit(1257172685.283:7): operation="profile_load" pid=409 name=/usr/sbin/mysqld-akonadi
02/11/2009 14:38:10 kensbox kernel [ 3.433965] type=1505 audit(1257172685.293:8): operation="profile_load" pid=410 name=/usr/sbin/tcpdump
02/11/2009 14:38:10 kensbox kernel [ 4.981226] Adding 1975952k swap on /dev/sda5. Priority:-1 extents:1 across:1975952k
02/11/2009 14:38:10 kensbox kernel [ 5.227327] udev: starting version 147
02/11/2009 14:38:10 kensbox kernel [ 5.564388] Adding 3301316k swap on /dev/sdb5. Priority:-2 extents:1 across:3301316k
02/11/2009 14:38:10 kensbox kernel [ 6.334549] EXT3 FS on sda6, internal journal
02/11/2009 14:38:10 kensbox kernel [ 6.818231] kjournald starting. Commit interval 5 seconds
02/11/2009 14:38:10 kensbox kernel [ 6.832713] EXT3 FS on sda1, internal journal
02/11/2009 14:38:10 kensbox kernel [ 6.832718] EXT3-fs: mounted filesystem with writeback data mode.
02/11/2009 14:38:10 kensbox kernel [ 6.927638] kjournald starting. Commit interval 5 seconds
02/11/2009 14:38:10 kensbox kernel [ 6.956339] EXT3 FS on sda7, internal journal
02/11/2009 14:38:10 kensbox kernel [ 6.956344] EXT3-fs: mounted filesystem with writeback data mode.
02/11/2009 14:38:10 kensbox rsyslogd-2039 Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
02/11/2009 14:38:10 kensbox avahi-daemon[719] Found user 'avahi' (UID 105) and group 'avahi' (GID 111).
02/11/2009 14:38:10 kensbox avahi-daemon[719] Successfully dropped root privileges.
02/11/2009 14:38:10 kensbox avahi-daemon[719] avahi-daemon 0.6.25 starting up.
02/11/2009 14:38:11 kensbox avahi-daemon[719] Successfully called chroot().
02/11/2009 14:38:11 kensbox avahi-daemon[719] Successfully dropped remaining capabilities.
02/11/2009 14:38:11 kensbox avahi-daemon[719] No service file found in /etc/avahi/services.
02/11/2009 14:38:11 kensbox avahi-daemon[719] Network interface enumeration completed.
02/11/2009 14:38:11 kensbox avahi-daemon[719] Registering HINFO record with values 'X86_64'/'LINUX'.
02/11/2009 14:38:11 kensbox avahi-daemon[719] Server startup complete. Host name is kensbox.local. Local service cookie is 3850650016.
02/11/2009 14:38:11 kensbox kernel [ 9.773636] type=1505 audit(1257172691.633:9): operation="profile_replace" pid=747 name=/sbin/dhclient3
02/11/2009 14:38:11 kensbox kernel [ 9.773898] type=1505 audit(1257172691.633:10): operation="profile_replace" pid=747 name=/usr/lib/NetworkManager/nm-dhcp-client.action
02/11/2009 14:38:11 kensbox kernel [ 9.774044] type=1505 audit(1257172691.633:11): operation="profile_replace" pid=747 name=/usr/lib/connman/scripts/dhclient-script
02/11/2009 14:38:11 kensbox kernel [ 9.776802] type=1505 audit(1257172691.633:12): operation="profile_replace" pid=749 name=/usr/lib/cups/backend/cups-pdf
02/11/2009 14:38:11 kensbox kernel [ 9.777135] type=1505 audit(1257172691.633:13): operation="profile_replace" pid=749 name=/usr/sbin/cupsd
02/11/2009 14:38:11 kensbox kernel [ 9.778924] type=1505 audit(1257172691.633:14): operation="profile_replace" pid=750 name=/usr/sbin/mysqld-akonadi
02/11/2009 14:38:11 kensbox kernel [ 9.780414] type=1505 audit(1257172691.643:15): operation="profile_replace" pid=751 name=/usr/sbin/tcpdump
02/11/2009 14:38:12 kensbox NetworkManager <info> starting...
02/11/2009 14:38:13 kensbox anacron[836] Anacron 2.3 started on 2009-11-02
02/11/2009 14:38:13 kensbox init apport pre-start process (825) terminated with status 1
02/11/2009 14:38:13 kensbox init apport post-stop process (839) terminated with status 1
02/11/2009 14:38:13 kensbox cron[828] (CRON) INFO (pidfile fd = 3)
02/11/2009 14:38:13 kensbox cron[849] (CRON) STARTUP (fork ok)
02/11/2009 14:38:13 kensbox cron[849] (CRON) INFO (Running @reboot jobs)
02/11/2009 14:38:13 kensbox NetworkManager <info> Trying to start the modem-manager...
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Novatel
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Gobi
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Nokia
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Option
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Sierra
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Ericsson MBM
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin MotoC
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Huawei
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Generic
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin ZTE
02/11/2009 14:38:13 kensbox modem-manager Loaded plugin Option High-Speed
02/11/2009 14:38:13 kensbox anacron[836] Will run job `cron.daily' in 5 min.
02/11/2009 14:38:13 kensbox anacron[836] Jobs will be executed sequentially
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: init!
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: update_system_hostname
02/11/2009 14:38:14 kensbox NetworkManager SCPluginIfupdown: management mode: unmanaged
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0/net/eth0, iface: eth0)
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0/net/eth0, iface: eth0): no ifupdown configuration found.
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: end _init.
02/11/2009 14:38:14 kensbox NetworkManager Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list.
02/11/2009 14:38:14 kensbox NetworkManager Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
02/11/2009 14:38:14 kensbox NetworkManager <info> Wireless now enabled by radio killswitch
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: (25310304) ... get_connections.
02/11/2009 14:38:14 kensbox NetworkManager SCPlugin-Ifupdown: (25310304) ... get_connections (managed=false): return empty list.
02/11/2009 14:38:15 kensbox NetworkManager Ifupdown: get unmanaged devices count: 0
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): carrier is OFF
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): new Ethernet device (driver: 'skge')
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): now managed
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): device state change: 1 -> 2 (reason 2)
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): bringing up device.
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): preparing device.
02/11/2009 14:38:15 kensbox NetworkManager <info> (eth0): deactivating device (reason: 2).
02/11/2009 14:38:15 kensbox kernel [ 13.372787] skge eth0: enabling interface
02/11/2009 14:38:15 kensbox kernel [ 13.376255] ADDRCONF(NETDEV_UP): eth0: link is not ready
02/11/2009 14:38:15 kensbox NetworkManager Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0/net/eth0
02/11/2009 14:38:15 kensbox NetworkManager <info> modem-manager is now available
02/11/2009 14:38:15 kensbox NetworkManager <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
02/11/2009 14:38:15 kensbox NetworkManager <info> Trying to start the supplicant...
02/11/2009 14:38:17 kensbox NetworkManager <info> (eth0): carrier now ON (device state 2)
02/11/2009 14:38:17 kensbox NetworkManager <info> (eth0): device state change: 2 -> 3 (reason 40)
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) starting connection 'Auto eth0'
02/11/2009 14:38:17 kensbox NetworkManager <info> (eth0): device state change: 3 -> 4 (reason 0)
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
02/11/2009 14:38:17 kensbox kernel [ 15.261693] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
02/11/2009 14:38:17 kensbox kernel [ 15.261994] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
02/11/2009 14:38:17 kensbox NetworkManager <info> (eth0): device state change: 4 -> 5 (reason 0)
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
02/11/2009 14:38:17 kensbox NetworkManager <info> (eth0): device state change: 5 -> 7 (reason 0)
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
02/11/2009 14:38:17 kensbox NetworkManager <info> dhclient started with pid 1026
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete.
02/11/2009 14:38:17 kensbox dhclient Internet Systems Consortium DHCP Client V3.1.2
02/11/2009 14:38:17 kensbox dhclient Copyright 2004-2008 Internet Systems Consortium.
02/11/2009 14:38:17 kensbox dhclient All rights reserved.
02/11/2009 14:38:17 kensbox dhclient For info, please visit http://www.isc.org/sw/dhcp/
02/11/2009 14:38:17 kensbox dhclient
02/11/2009 14:38:17 kensbox NetworkManager <info> DHCP: device eth0 state changed (null) -> preinit
02/11/2009 14:38:17 kensbox dhclient Listening on LPF/eth0/00:30:bd:b9:3f:15
02/11/2009 14:38:17 kensbox dhclient Sending on LPF/eth0/00:30:bd:b9:3f:15
02/11/2009 14:38:17 kensbox dhclient Sending on Socket/fallback
02/11/2009 14:38:17 kensbox dhclient DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
02/11/2009 14:38:17 kensbox dhclient DHCPOFFER of 10.0.0.4 from 10.0.0.2
02/11/2009 14:38:17 kensbox dhclient DHCPREQUEST of 10.0.0.4 on eth0 to 255.255.255.255 port 67
02/11/2009 14:38:17 kensbox dhclient DHCPACK of 10.0.0.4 from 10.0.0.2
02/11/2009 14:38:17 kensbox NetworkManager <info> DHCP: device eth0 state changed preinit -> bound
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
02/11/2009 14:38:17 kensbox NetworkManager <info> address 10.0.0.4
02/11/2009 14:38:17 kensbox NetworkManager <info> prefix 24 (255.255.255.0)
02/11/2009 14:38:17 kensbox NetworkManager <info> gateway 10.0.0.2
02/11/2009 14:38:17 kensbox dhclient bound to 10.0.0.4 -- renewal in 42492 seconds.
02/11/2009 14:38:17 kensbox NetworkManager <info> hostname 'kensbox'
02/11/2009 14:38:17 kensbox NetworkManager <info> nameserver '10.0.0.2'
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
02/11/2009 14:38:17 kensbox NetworkManager <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
02/11/2009 14:38:17 kensbox avahi-daemon[719] Joining mDNS multicast group on interface eth0.IPv4 with address 10.0.0.4.
02/11/2009 14:38:17 kensbox avahi-daemon[719] New relevant interface eth0.IPv4 for mDNS.
02/11/2009 14:38:17 kensbox avahi-daemon[719] Registering new address record for 10.0.0.4 on eth0.IPv4.
02/11/2009 14:38:18 kensbox avahi-daemon[719] Registering new address record for fe80::230:bdff:feb9:3f15 on eth0.*.
02/11/2009 14:38:27 kensbox kernel [ 25.620010] eth0: no IPv6 routers present
02/11/2009 14:38:27 kensbox NetworkManager <info> (eth0): device state change: 7 -> 8 (reason 0)
02/11/2009 14:38:27 kensbox NetworkManager <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
02/11/2009 14:38:27 kensbox NetworkManager <info> Activation (eth0) successful, device activated.
02/11/2009 14:38:27 kensbox NetworkManager <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
02/11/2009 14:38:29 kensbox NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0/net/eth0, iface: eth0)
02/11/2009 14:38:29 kensbox NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0/net/eth0, iface: eth0): no ifupdown configuration found.
02/11/2009 14:38:30 kensbox kernel [ 28.913431] ip_tables: (C) 2000-2006 Netfilter Core Team
02/11/2009 14:38:31 kensbox acpid client connected from 1231[106:113]
02/11/2009 14:38:31 kensbox kernel [ 30.063300] EDAC MC: Ver: 2.1.0 Oct 16 2009
02/11/2009 14:38:31 kensbox kernel [ 30.093478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
02/11/2009 14:38:31 kensbox kernel [ 30.094933] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
02/11/2009 14:38:31 kensbox kernel [ 30.094936] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
02/11/2009 14:38:32 kensbox kernel [ 30.138926] nvidia: module license 'NVIDIA' taints kernel.
02/11/2009 14:38:32 kensbox kernel [ 30.138931] Disabling lock debugging due to kernel taint
02/11/2009 14:38:32 kensbox kernel [ 30.400403] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
02/11/2009 14:38:32 kensbox kernel [ 30.406121] alloc irq_desc for 16 on node 0
02/11/2009 14:38:32 kensbox kernel [ 30.406126] alloc kstat_irqs on node 0
02/11/2009 14:38:32 kensbox kernel [ 30.406134] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
02/11/2009 14:38:32 kensbox kernel [ 30.406421] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009
02/11/2009 14:38:32 kensbox kernel [ 30.479666] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009
02/11/2009 14:38:32 kensbox kernel [ 30.479749] EDAC amd64: This node reports that Memory ECC is currently disabled.
02/11/2009 14:38:32 kensbox kernel [ 30.479752] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
02/11/2009 14:38:32 kensbox kernel [ 30.479754] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
02/11/2009 14:38:32 kensbox kernel [ 30.479756] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
02/11/2009 14:38:32 kensbox kernel [ 30.479757] Might be a BIOS bug, if BIOS says ECC is enabled
02/11/2009 14:38:32 kensbox kernel [ 30.479758] Use of the override can cause unknown side effects.
02/11/2009 14:38:32 kensbox kernel [ 30.479783] amd64_edac: probe of 0000:00:18.2 failed with error -22
02/11/2009 14:38:32 kensbox ntpdate[1222] adjust time server 91.189.94.4 offset -0.282730 sec
02/11/2009 14:38:32 kensbox kernel [ 30.512754] parport_pc 00:06: reported by Plug and Play ACPI
02/11/2009 14:38:32 kensbox kernel [ 30.512858] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
02/11/2009 14:38:32 kensbox kernel [ 30.545069] C-Media PCI 0000:02:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
02/11/2009 14:38:32 kensbox kernel [ 30.547649] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
02/11/2009 14:38:32 kensbox kernel [ 30.547654] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
02/11/2009 14:38:32 kensbox kernel [ 30.644738] gameport: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 877kHz
02/11/2009 14:38:32 kensbox kernel [ 30.677295] lp0: using parport0 (interrupt-driven).
02/11/2009 14:38:32 kensbox kernel [ 30.897718] ppdev: user-space parallel port driver
02/11/2009 14:38:33 kensbox kernel [ 31.216376] input: PS2++ Logitech Mouse as /devices/platform/i8042/serio1/input/input5
02/11/2009 14:38:33 kensbox udev-configure-printer add /devices/pnp0/00:06/printer/lp0
02/11/2009 14:38:33 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:33 kensbox udev-configure-printer add /module/lp
02/11/2009 14:38:33 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.0/usb2
02/11/2009 14:38:34 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.0/usb2/2-0:1.0
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.0/usb2
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 1D6B:0001
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.0/usb2/2-1
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.0/usb2/2-1/2-1:1.0
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.1/usb3
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.1/usb3/3-0:1.0
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.2/usb4
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.2/usb4/4-0:1.0
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.3/usb1
02/11/2009 14:38:34 kensbox udev-configure-printer add /devices/pci0000:00/0000:00:0f.3/usb1/1-0:1.0
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.0/usb2
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 1D6B:0001
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.0/usb2/2-1
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 06A3:053C
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:34 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.1/usb3
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 1D6B:0001
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:34 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.2/usb4
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 1D6B:0001
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:34 kensbox udev-configure-printer Failed to get parent
02/11/2009 14:38:34 kensbox udev-configure-printer parent devpath is /devices/pci0000:00/0000:00:0f.3/usb1
02/11/2009 14:38:34 kensbox udev-configure-printer Device vendor/product is 1D6B:0002
02/11/2009 14:38:34 kensbox udev-configure-printer invalid or missing IEEE 1284 Device ID
02/11/2009 14:38:35 kensbox init anacron main process (836) killed by TERM signal
02/11/2009 14:38:35 kensbox kernel [ 34.030391] usplash:346 freeing invalid memtype ffffffffc0000000-ffffffffd0000000
02/11/2009 14:38:36 kensbox acpid client connected from 1505[0:0]
02/11/2009 14:38:39 kensbox kernel [ 36.816747] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
02/11/2009 14:38:39 kensbox kernel [ 36.816764] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
02/11/2009 14:38:39 kensbox kernel [ 36.816786] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
02/11/2009 14:38:39 kensbox acpid client connected from 1505[0:0]
02/11/2009 14:38:59 kensbox console-kit-daemon[837] WARNING: Couldn't read /proc/783/environ: Failed to open file '/proc/783/environ': No such file or directory
02/11/2009 14:39:58 kensbox rsyslogd [origin software="rsyslogd" swVersion="4.2.0" x-pid="675" x-info="http://www.rsyslog.com"] (re)start
02/11/2009 14:39:58 kensbox rsyslogd-2039 Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]
02/11/2009 14:39:59 kensbox rsyslogd rsyslogd's groupid changed to 102
02/11/2009 14:39:59 kensbox rsyslogd rsyslogd's userid changed to 101
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Initializing cgroup subsys cpuset
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Initializing cgroup subsys cpu
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=c63ec06a-e4e7-4f7f-92c7-cbe808a68af8 ro quiet splash
02/11/2009 14:39:59 kensbox kernel [ 0.000000] KERNEL supported cpus:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Intel GenuineIntel
02/11/2009 14:39:59 kensbox kernel [ 0.000000] AMD AuthenticAMD
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Centaur CentaurHauls
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-provided physical RAM map:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMI 2.3 present.
02/11/2009 14:39:59 kensbox kernel [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
02/11/2009 14:39:59 kensbox kernel [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] MTRR default type: uncachable
02/11/2009 14:39:59 kensbox kernel [ 0.000000] MTRR fixed ranges enabled:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 00000-9FFFF write-back
02/11/2009 14:39:59 kensbox kernel [ 0.000000] A0000-EFFFF uncachable
02/11/2009 14:39:59 kensbox kernel [ 0.000000] F0000-FFFFF write-protect
02/11/2009 14:39:59 kensbox kernel [ 0.000000] MTRR variable ranges enabled:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 1 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 2 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 3 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 4 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 5 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 6 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 7 disabled
02/11/2009 14:39:59 kensbox kernel [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Scanning 0 areas for low memory corruption
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified physical RAM map:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] initial memory mapped : 0 - 20000000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Using x86 segment limits to approximate NX protection
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 0000000000 - 007fe00000 page 2M
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 007fe00000 - 007ffb0000 page 4k
02/11/2009 14:39:59 kensbox kernel [ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 10000-14000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] RAMDISK: 3786c000 - 37fef388
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: RSDP 00000000000f9ae0 00014 (v00 ACPIAM)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: RSDT 000000007ffb0000 00030 (v01 A M I OEMRSDT 11000502 MSFT 00000097)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: FACP 000000007ffb0200 00081 (v01 A M I OEMFACP 11000502 MSFT 00000097)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: DSDT 000000007ffb03f0 03F3A (v01 939A8 939A8190 00000190 INTL 02002026)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: FACS 000000007ffc0000 00040
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: APIC 000000007ffb0390 0005C (v01 A M I OEMAPIC 11000502 MSFT 00000097)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: OEMB 000000007ffc0040 00040 (v01 A M I AMI_OEM 11000502 MSFT 00000097)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: Local APIC address 0xfee00000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Scanning NUMA topology in Northbridge 24
02/11/2009 14:39:59 kensbox kernel [ 0.000000] No NUMA configuration found
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Faking a node at 0000000000000000-000000007ffb0000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffb0000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] bootmap [0000000000017000 - 0000000000026ff7] pages 10
02/11/2009 14:39:59 kensbox kernel [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ffb0000]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #3 [003786c000 - 0037fef388] RAMDISK ==> [003786c000 - 0037fef388]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #5 [00019e3000 - 00019e3099] BRK ==> [00019e3000 - 00019e3099]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
02/11/2009 14:39:59 kensbox kernel [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Zone PFN ranges:
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA 0x00000010 -> 0x00001000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA32 0x00001000 -> 0x00100000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Normal 0x00100000 -> 0x00100000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Movable zone start PFN for each node
02/11/2009 14:39:59 kensbox kernel [ 0.000000] early_node_map[2] active PFN ranges
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 0: 0x00000010 -> 0x0000009f
02/11/2009 14:39:59 kensbox kernel [ 0.000000] 0: 0x00000100 -> 0x0007ffb0
02/11/2009 14:39:59 kensbox kernel [ 0.000000] On node 0 totalpages: 524095
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA zone: 56 pages used for memmap
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA zone: 101 pages reserved
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA zone: 3826 pages, LIFO batch:0
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA32 zone: 7111 pages used for memmap
02/11/2009 14:39:59 kensbox kernel [ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: PM-Timer IO Port: 0x808
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: Local APIC address 0xfee00000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
02/11/2009 14:39:59 kensbox kernel [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: IRQ0 used by override.
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: IRQ2 used by override.
02/11/2009 14:39:59 kensbox kernel [ 0.000000] ACPI: IRQ9 used by override.
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Using ACPI (MADT) for SMP configuration information
02/11/2009 14:39:59 kensbox kernel [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
02/11/2009 14:39:59 kensbox kernel [ 0.000000] nr_irqs_gsi: 24
02/11/2009 14:39:59 kensbox kernel [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7f7c0000)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
02/11/2009 14:39:59 kensbox kernel [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f4000, static data 90720 bytes
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516827
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Policy zone: DMA32
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=c63ec06a-e4e7-4f7f-92c7-cbe808a68af8 ro quiet splash
02/11/2009 14:39:59 kensbox kernel [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Initializing CPU#0
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Checking aperture...
02/11/2009 14:39:59 kensbox kernel [ 0.000000] AGP bridge at 00:00:00
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Node 0: aperture @ e0000000 size 256 MB
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Memory: 2049488k/2096832k available (5313k kernel code, 452k absent, 46892k reserved, 3011k data, 660k init)
02/11/2009 14:39:59 kensbox kernel [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
02/11/2009 14:39:59 kensbox kernel [ 0.000000] NR_IRQS:4352 nr_irqs:424
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Fast TSC calibration using PIT
02/11/2009 14:39:59 kensbox kernel [ 0.000000] Detected 2399.813 MHz processor.
02/11/2009 14:39:59 kensbox kernel [ 0.000013] spurious 8259A interrupt: IRQ7.
02/11/2009 14:39:59 kensbox kernel [ 0.002109] Console: colour VGA+ 80x25
02/11/2009 14:39:59 kensbox kernel [ 0.002113] console [tty0] enabled
02/11/2009 14:39:59 kensbox kernel [ 0.010000] allocated 20971520 bytes of page_cgroup
02/11/2009 14:39:59 kensbox kernel [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.62 BogoMIPS (lpj=23998130)
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Security Framework initialized
02/11/2009 14:39:59 kensbox kernel [ 0.010000] AppArmor: AppArmor initialized
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Mount-cache hash table entries: 256
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Initializing cgroup subsys ns
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Initializing cgroup subsys cpuacct
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Initializing cgroup subsys memory
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Initializing cgroup subsys freezer
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Initializing cgroup subsys net_cls
02/11/2009 14:39:59 kensbox kernel [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
02/11/2009 14:39:59 kensbox kernel [ 0.010000] CPU: L2 Cache: 1024K (64 bytes/line)
02/11/2009 14:39:59 kensbox kernel [ 0.010000] CPU 0/0x0 -> Node 0
02/11/2009 14:39:59 kensbox kernel [ 0.010000] tseg: 0000000000
02/11/2009 14:39:59 kensbox kernel [ 0.010000] mce: CPU supports 5 MCE banks
02/11/2009 14:39:59 kensbox kernel [ 0.010000] Performance Counters: AMD PMU driver.
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... version: 0
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... bit width: 48
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... generic counters: 4
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... value mask: 0000ffffffffffff
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... max period: 00007fffffffffff
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... fixed-purpose counters: 0
02/11/2009 14:39:59 kensbox kernel [ 0.010000] ... counter mask: 000000000000000f
02/11/2009 14:39:59 kensbox kernel [ 0.010000] SMP alternatives: switching to UP code
02/11/2009 14:39:59 kensbox kernel [ 0.011679] ACPI: Core revision 20090521
02/11/2009 14:39:59 kensbox kernel [ 0.016300] Setting APIC routing to flat
02/11/2009 14:39:59 kensbox kernel [ 0.017038] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
02/11/2009 14:39:59 kensbox kernel [ 0.117054] CPU0: AMD Athlon(tm) 64 Processor 4000+ stepping 02
02/11/2009 14:39:59 kensbox kernel [ 0.120000] Brought up 1 CPUs
02/11/2009 14:39:59 kensbox kernel [ 0.120000] Total of 1 processors activated (4799.62 BogoMIPS).
02/11/2009 14:39:59 kensbox kernel [ 0.120000] CPU0 attaching NULL sched-domain.
02/11/2009 14:39:59 kensbox kernel [ 0.120000] Booting paravirtualized kernel on bare hardware
02/11/2009 14:39:59 kensbox kernel [ 0.120000] regulator: core version 0.5
02/11/2009 14:39:59 kensbox kernel [ 0.120000] Time: 14:39:48 Date: 11/02/09
02/11/2009 14:39:59 kensbox kernel [ 0.120000] NET: Registered protocol family 16
02/11/2009 14:39:59 kensbox kernel [ 0.120000] node 0 link 0: io port [1000, ffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] TOM: 0000000080000000 aka 2048M
02/11/2009 14:39:59 kensbox kernel [ 0.120000] node 0 link 0: mmio [a0000, bffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] node 0 link 0: mmio [80000000, ffffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] bus: [00,ff] on node 0 link 0
02/11/2009 14:39:59 kensbox kernel [ 0.120000] bus: 00 index 0 io port: [0, ffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] bus: 00 index 1 mmio: [a0000, bffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] bus: 00 index 2 mmio: [80000000, fcffffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.120000] ACPI: bus type pci registered
02/11/2009 14:39:59 kensbox kernel [ 0.120000] PCI: Using configuration type 1 for base access
02/11/2009 14:39:59 kensbox kernel [ 0.120000] bio: create slab <bio-0> at 0
02/11/2009 14:39:59 kensbox kernel [ 0.120000] ACPI: EC: Look up EC in DSDT
02/11/2009 14:39:59 kensbox kernel [ 0.120000] ACPI: Interpreter enabled
02/11/2009 14:39:59 kensbox kernel [ 0.120000] ACPI: (supports S0 S1 S3 S4 S5)
02/11/2009 14:39:59 kensbox kernel [ 0.120000] ACPI: Using IOAPIC for interrupt routing
02/11/2009 14:39:59 kensbox kernel [ 0.121486] ACPI Warning: Incorrect checksum in table [OEMB] - AD, should be 9F 20090521 tbutils-246
02/11/2009 14:39:59 kensbox kernel [ 0.121546] ACPI: No dock devices found.
02/11/2009 14:39:59 kensbox kernel [ 0.121632] ACPI: PCI Root Bridge [PCI0] (0000:00)
02/11/2009 14:39:59 kensbox kernel [ 0.121673] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.121815] pci 0000:00:03.1: quirk: region 0800-083f claimed by ali7101 ACPI
02/11/2009 14:39:59 kensbox kernel [ 0.121842] pci 0000:00:0e.0: reg 10 io port: [0x1f0-0x1ff]
02/11/2009 14:39:59 kensbox kernel [ 0.121846] pci 0000:00:0e.0: reg 14 io port: [0x3f4-0x3f7]
02/11/2009 14:39:59 kensbox kernel [ 0.121849] pci 0000:00:0e.0: reg 18 io port: [0x170-0x17f]
02/11/2009 14:39:59 kensbox kernel [ 0.121853] pci 0000:00:0e.0: reg 1c io port: [0x374-0x377]
02/11/2009 14:39:59 kensbox kernel [ 0.121857] pci 0000:00:0e.0: reg 20 io port: [0xff00-0xff0f]
02/11/2009 14:39:59 kensbox kernel [ 0.121874] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
02/11/2009 14:39:59 kensbox kernel [ 0.121897] pci 0000:00:0f.1: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
02/11/2009 14:39:59 kensbox kernel [ 0.121922] pci 0000:00:0f.2: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff]
02/11/2009 14:39:59 kensbox kernel [ 0.121951] pci 0000:00:0f.3: reg 10 32bit mmio: [0xfebfcc00-0xfebfccff]
02/11/2009 14:39:59 kensbox kernel [ 0.121972] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
02/11/2009 14:39:59 kensbox kernel [ 0.121975] pci 0000:00:0f.3: PME# disabled
02/11/2009 14:39:59 kensbox kernel [ 0.122065] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122071] pci 0000:01:00.0: reg 14 32bit mmio: [0xc0000000-0xcfffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122077] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122092] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122136] pci 0000:00:01.0: bridge 32bit mmio: [0xfa900000-0xfe9fffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122139] pci 0000:00:01.0: bridge 32bit mmio pref: [0xba800000-0xda7fffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122172] pci 0000:02:06.0: reg 10 32bit mmio: [0xfeafc000-0xfeafffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122177] pci 0000:02:06.0: reg 14 io port: [0xe800-0xe8ff]
02/11/2009 14:39:59 kensbox kernel [ 0.122206] pci 0000:02:06.0: supports D1 D2
02/11/2009 14:39:59 kensbox kernel [ 0.122208] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
02/11/2009 14:39:59 kensbox kernel [ 0.122211] pci 0000:02:06.0: PME# disabled
02/11/2009 14:39:59 kensbox kernel [ 0.122234] pci 0000:02:07.0: reg 10 io port: [0xe400-0xe4ff]
02/11/2009 14:39:59 kensbox kernel [ 0.122265] pci 0000:02:07.0: supports D1 D2
02/11/2009 14:39:59 kensbox kernel [ 0.122289] pci 0000:00:02.0: transparent bridge
02/11/2009 14:39:59 kensbox kernel [ 0.122292] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
02/11/2009 14:39:59 kensbox kernel [ 0.122296] pci 0000:00:02.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
02/11/2009 14:39:59 kensbox kernel [ 0.122307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
02/11/2009 14:39:59 kensbox kernel [ 0.122365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
02/11/2009 14:39:59 kensbox kernel [ 0.122395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
02/11/2009 14:39:59 kensbox kernel [ 0.127073] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127193] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15), disabled.
02/11/2009 14:39:59 kensbox kernel [ 0.127316] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127438] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127561] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127683] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127806] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.127929] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
02/11/2009 14:39:59 kensbox kernel [ 0.128051] ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15)
02/11/2009 14:39:59 kensbox kernel [ 0.128188] SCSI subsystem initialized
02/11/2009 14:39:59 kensbox kernel [ 0.128251] libata version 3.00 loaded.
02/11/2009 14:39:59 kensbox kernel [ 0.128313] usbcore: registered new interface driver usbfs
02/11/2009 14:39:59 kensbox kernel [ 0.128327] usbcore: registered new interface driver hub
02/11/2009 14:39:59 kensbox kernel [ 0.128353] usbcore: registered new device driver usb
02/11/2009 14:39:59 kensbox kernel [ 0.128454] ACPI: WMI: Mapper loaded
02/11/2009 14:39:59 kensbox kernel [ 0.128456] PCI: Using ACPI for IRQ routing
02/11/2009 14:39:59 kensbox kernel [ 0.128463] pci 0000:00:00.0: BAR 0: address space collision on of device [0xe0000000-0xefffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.128465] pci 0000:00:00.0: BAR 0: can't allocate resource
02/11/2009 14:39:59 kensbox kernel [ 0.128570] Bluetooth: Core ver 2.15
02/11/2009 14:39:59 kensbox kernel [ 0.128596] NET: Registered protocol family 31
02/11/2009 14:39:59 kensbox kernel [ 0.128598] Bluetooth: HCI device and connection manager initialized
02/11/2009 14:39:59 kensbox kernel [ 0.128601] Bluetooth: HCI socket layer initialized
02/11/2009 14:39:59 kensbox kernel [ 0.128602] NetLabel: Initializing
02/11/2009 14:39:59 kensbox kernel [ 0.128604] NetLabel: domain hash size = 128
02/11/2009 14:39:59 kensbox kernel [ 0.128605] NetLabel: protocols = UNLABELED CIPSOv4
02/11/2009 14:39:59 kensbox kernel [ 0.128618] NetLabel: unlabeled traffic allowed by default
02/11/2009 14:39:59 kensbox kernel [ 0.128677] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
02/11/2009 14:39:59 kensbox kernel [ 0.128684] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
02/11/2009 14:39:59 kensbox kernel [ 0.128687] agpgart-amd64 0000:00:00.0: setting up ULi AGP
02/11/2009 14:39:59 kensbox kernel [ 0.136646] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
02/11/2009 14:39:59 kensbox kernel [ 0.138033] pnp: PnP ACPI init
02/11/2009 14:39:59 kensbox kernel [ 0.138057] ACPI: bus type pnp registered
02/11/2009 14:39:59 kensbox kernel [ 0.141022] pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling
02/11/2009 14:39:59 kensbox kernel [ 0.141026] pnp 00:0e: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling
02/11/2009 14:39:59 kensbox kernel [ 0.141029] pnp 00:0e: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling
02/11/2009 14:39:59 kensbox kernel [ 0.141032] pnp 00:0e: mem resource (0x100000-0x7fffffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling
02/11/2009 14:39:59 kensbox kernel [ 0.141281] pnp: PnP ACPI: found 15 devices
02/11/2009 14:39:59 kensbox kernel [ 0.141282] ACPI: ACPI bus type pnp unregistered
02/11/2009 14:39:59 kensbox kernel [ 0.141294] system 00:08: ioport range 0x400-0x40f has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141297] system 00:08: ioport range 0x480-0x48f has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141300] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141302] system 00:08: ioport range 0x800-0x87f could not be reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141306] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141310] system 00:09: iomem range 0xffbc0000-0xffbfffff has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141313] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141316] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141320] system 00:0d: ioport range 0x680-0x6ff has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.141323] system 00:0d: ioport range 0x295-0x296 has been reserved
02/11/2009 14:39:59 kensbox kernel [ 0.145970] AppArmor: AppArmor Filesystem Enabled
02/11/2009 14:39:59 kensbox kernel [ 0.145992] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
02/11/2009 14:39:59 kensbox kernel [ 0.145993] pci 0000:00:01.0: IO window: disabled
02/11/2009 14:39:59 kensbox kernel [ 0.145999] pci 0000:00:01.0: MEM window: 0xfa900000-0xfe9fffff
02/11/2009 14:39:59 kensbox kernel [ 0.146002] pci 0000:00:01.0: PREFETCH window: 0xba800000-0xda7fffff
02/11/2009 14:39:59 kensbox kernel [ 0.146006] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
02/11/2009 14:39:59 kensbox kernel [ 0.146009] pci 0000:00:02.0: IO window: 0xe000-0xefff
02/11/2009 14:39:59 kensbox kernel [ 0.146013] pci 0000:00:02.0: MEM window: 0xfea00000-0xfeafffff
02/11/2009 14:39:59 kensbox kernel [ 0.146016] pci 0000:00:02.0: PREFETCH window: disabled
02/11/2009 14:39:59 kensbox kernel [ 0.146026] pci 0000:00:01.0: setting latency timer to 64
02/11/2009 14:39:59 kensbox kernel [ 0.146031] pci 0000:00:02.0: setting latency timer to 64
02/11/2009 14:39:59 kensbox kernel [ 0.146036] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146038] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146041] pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfe9fffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146043] pci_bus 0000:01: resource 2 pref mem [0xba800000-0xda7fffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146046] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
02/11/2009 14:39:59 kensbox kernel [ 0.146048] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146050] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146053] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
02/11/2009 14:39:59 kensbox kernel [ 0.146090] NET: Registered protocol family 2
02/11/2009 14:39:59 kensbox kernel [ 0.146220] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.147208] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.150036] Switched to high resolution mode on CPU 0
02/11/2009 14:39:59 kensbox kernel [ 0.150275] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.151123] TCP: Hash tables configured (established 262144 bind 65536)
02/11/2009 14:39:59 kensbox kernel [ 0.151127] TCP reno registered
02/11/2009 14:39:59 kensbox kernel [ 0.151263] NET: Registered protocol family 1
02/11/2009 14:39:59 kensbox kernel [ 0.151339] Trying to unpack rootfs image as initramfs...
02/11/2009 14:39:59 kensbox kernel [ 0.318548] Freeing initrd memory: 7692k freed
02/11/2009 14:39:59 kensbox kernel [ 0.324696] Scanning for low memory corruption every 60 seconds
02/11/2009 14:39:59 kensbox kernel [ 0.324855] audit: initializing netlink socket (disabled)
02/11/2009 14:39:59 kensbox kernel [ 0.324873] type=2000 audit(1257172788.320:1): initialized
02/11/2009 14:39:59 kensbox kernel [ 0.332782] HugeTLB registered 2 MB page size, pre-allocated 0 pages
02/11/2009 14:39:59 kensbox kernel [ 0.333996] VFS: Disk quotas dquot_6.5.2
02/11/2009 14:39:59 kensbox kernel [ 0.334043] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
02/11/2009 14:39:59 kensbox kernel [ 0.334574] fuse init (API version 7.12)
02/11/2009 14:39:59 kensbox kernel [ 0.334642] msgmni has been set to 4017
02/11/2009 14:39:59 kensbox kernel [ 0.334810] alg: No test for stdrng (krng)
02/11/2009 14:39:59 kensbox kernel [ 0.334820] io scheduler noop registered
02/11/2009 14:39:59 kensbox kernel [ 0.334822] io scheduler anticipatory registered
02/11/2009 14:39:59 kensbox kernel [ 0.334823] io scheduler deadline registered
02/11/2009 14:39:59 kensbox kernel [ 0.334857] io scheduler cfq registered (default)
02/11/2009 14:39:59 kensbox kernel [ 0.390034] pci 0000:01:00.0: Boot video device
02/11/2009 14:39:59 kensbox kernel [ 0.390135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
02/11/2009 14:39:59 kensbox kernel [ 0.390155] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
02/11/2009 14:39:59 kensbox kernel [ 0.390255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
02/11/2009 14:39:59 kensbox kernel [ 0.390258] ACPI: Power Button [PWRF]
02/11/2009 14:39:59 kensbox kernel [ 0.390303] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
02/11/2009 14:39:59 kensbox kernel [ 0.390305] ACPI: Power Button [PWRB]
02/11/2009 14:39:59 kensbox kernel [ 0.390500] processor LNXCPU:00: registered as cooling_device0
02/11/2009 14:39:59 kensbox kernel [ 0.393385] Linux agpgart interface v0.103
02/11/2009 14:39:59 kensbox kernel [ 0.393396] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
02/11/2009 14:39:59 kensbox kernel [ 0.393494] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
02/11/2009 14:39:59 kensbox kernel [ 0.393748] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
02/11/2009 14:39:59 kensbox kernel [ 0.394524] brd: module loaded
02/11/2009 14:39:59 kensbox kernel [ 0.394877] loop: module loaded
02/11/2009 14:39:59 kensbox kernel [ 0.394938] input: Macintosh mouse button emulation as /devices/virtual/input/input2
02/11/2009 14:39:59 kensbox kernel [ 0.395213] alloc irq_desc for 19 on node 0
02/11/2009 14:39:59 kensbox kernel [ 0.395215] alloc kstat_irqs on node 0
02/11/2009 14:39:59 kensbox kernel [ 0.395223] pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
02/11/2009 14:39:59 kensbox kernel [ 0.395339] scsi0 : pata_ali
02/11/2009 14:39:59 kensbox kernel [ 0.395429] scsi1 : pata_ali
02/11/2009 14:39:59 kensbox kernel [ 0.397038] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
02/11/2009 14:39:59 kensbox kernel [ 0.397041] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
02/11/2009 14:39:59 kensbox kernel [ 0.397548] Fixed MDIO Bus: probed
02/11/2009 14:39:59 kensbox kernel [ 0.397575] PPP generic driver version 2.4.2
02/11/2009 14:39:59 kensbox kernel [ 0.397655] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
02/11/2009 14:39:59 kensbox kernel [ 0.397785] alloc irq_desc for 23 on node 0
02/11/2009 14:39:59 kensbox kernel [ 0.397787] alloc kstat_irqs on node 0
02/11/2009 14:39:59 kensbox kernel [ 0.397790] ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
02/11/2009 14:39:59 kensbox kernel [ 0.397808] ehci_hcd 0000:00:0f.3: EHCI Host Controller
02/11/2009 14:39:59 kensbox kernel [ &n

[Belac Ile]

Re: New install nodesktop just a blank screen with mouse pointer

KDE starts to load it the does the exploding windows trick with the desktop and I am left with a black sreen and a mouse pointer.

Hi lurch, have you tried to reinstall the kubuntu-desktop package via apt-get in the terminal? This is how I fixed multiple desktop issues.

[Guest]

Re: New install nodesktop just a blank screen with mouse pointer

I had the same problem, however, it only happened after I customized my desktop. I haven't had time to look too much into this, but I am suspecting the plasma theme I was using (Elegance) caused this problem. I deleted my .kde folder and stayed with the default plasma theme (Air). It seems to be working fine (so far).

I have Intel GMA X4500 video card in an HP p6180t machine. Does anyone have this config (any slickdealers ?)

Also, how do I change my plasma theme without having to resort to deleting my .kde folder?

Thanks

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer GIVEN UP!

Kubuntu 9.10 blank screen with mouse pointer.
Cannot download Gnome with Synaptic.
Ubuntu 9.10 downloads but will not save.
I have been using Kubuntu since Breezy Badger and Ubuntu on and off since it started, but I have had enough and given up and gone for something else.
I want a OS that just works without a lot of problems.
sadly
lurch

[petersk]

Re: New install nodesktop just a blank screen with mouse pointer

Similar problem here: KDE returns to opening screen while XFCE runs fine (using it to type this).

When I view the KDM log, I get:
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 6 16:41:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
Fulfilled via DRI at 30726400
Freed 30726400 (pool 2)
Freed 30726400 (pool 1)
error setting MTRR (base = 0xe4000000, size = 0x04000000, type = 1) Invalid argument (22)
(EE) AIGLX error: dlopen of /usr/lib/dri/(null)_dri.so failed (/usr/lib/dri/(null)_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(EE) XKB: No components provided for device Virtual core keyboard
[config/dbus] couldn't register object path
X: main/renderbuffer.c:2159: _mesa_reference_renderbuffer: Assertion `oldRb->Magic == 0xaabbccdd' failed.

What could the new upgrade from Jaunty to Karmic change that would cause this?

from lspci:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)


I HAVE been having a chronic problem with the video setting "not taking" in Jaunty before this issue. By that, I mean, I can change the display setting and it changes, but only for the current session. For reboots, it reverts back to a high resolution setting with a low refresh rate.

Could permissions on a file be set wrong or randr be choosing something wrong?

[lurch]

Re: New install nodesktop just a blank screen with mouse pointer

Hi
I have cured the problem with complete reinstall formatting all partition.
It now works fine I guess it did not like some of the setting in my /home partition.
sedge