I have installed Kubuntu Karmik 9.10 64-bit on my second machine, which has two SATA II HDDs & a SATA CD/DVD RW burner. I have problems burning CDs using K3b on Kubuntu 9.10 with a SATA CD/DVD writer. The drive reads CDs & DVDs ok, & will erase CD-RWs, but will *not* write. I'm using Verbatim CDs. So far burned three coasters, so now using Verbatim CD-RWs so at least I can erase them if anything goes awry.
My other machine (which also runs Kubuntu Karmic 9.10) has two SATA II HDDs & a normal PATA CD/DVD burner, & I have no problems with it at all.
Kernel: 2.6.31-17-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
Mainboard: Asrock K10N78FullHD-hSLI
http://www.asrock.com/MB/overview.asp?Model=K10N78-1394
OS: Kubuntu 9.10 64-bit
Device:
description: DVD-RAM writer
product: DVDRAM GH22LS50
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /media/cdrom0
version: TL01
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5
mount.fstype = iso9660
mount.options = nosuid,nodev,relatime,utf8
state = mounted
status = ready
hdparm -d1 /dev/xxx
/dev/sr0:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/scd0:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/cdrom:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/scd0:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device
hdparm -i /dev/scd0
/dev/scd0:
HDIO_DRIVE_CMD(identify) failed: Bad address
Model=HL-DT-ST, FwRev=TL01, SerialNo=K3I99ID5827
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive conforms to: unknown: ATA/ATAPI-3,4,5,6,7
* signifies the current active mode
cdrecord -scanbus
scsibus0:
0,0,0 0) 'HL-DT-ST' 'DVDRAM GH22LS50 ' 'TL01' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
ls -l /usr/bin/cdrecord
lrwxrwxrwx 1 root root 5 2010-01-04 15:30 /usr/bin/cdrecord -> wodim
ls -l /dev/scd0
lrwxrwxrwx 1 root root 3 2010-01-06 14:23 /dev/scd0 -> sr0
Log from k3b:
Devices
-----------------------
HL-DT-ST DVDRAM GH22LS50 TL01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 4500 (9216000 bytes)
System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.4 (KDE 4.3.4)
QT Version: 4.5.2
Kernel: 2.6.31-17-generic
Used versions
-----------------------
mkisofs: 1.1.9
cdrecord: 1.1.9
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22LS50 '
Revision : 'TL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15734 kB/s 89x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 1764 KB/s
Track 01: data 8 MB
Total size: 10 MB (01:00.02) = 4502 sectors
Lout start: 10 MB (01:02/02) = 4502 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
A3 values: 04 C4 80
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 355347
Starting to write CD/DVD at speed 10.0 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 8 MB written.
Track 01: 1 of 8 MB written (fifo 100%) [buf 95%] 2.9x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 40s
/usr/bin/wodim: The current problem looks like a buffer underrun.
/usr/bin/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/wodim: Please report.
/usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1079296 bytes
Writing time: 9.300s
Average write speed 6.5x.
Min drive buffer fill was 95%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 25.668s
/usr/bin/wodim: fifo had 146 puts and 18 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -tao -dummy driveropts=burnfree -multi -xa -tsize=4500s -
mkisofs
-----------------------
4500
I: -input-charset not specified, using utf-8 (detected in locale settings)
11.24% done, estimate finish Thu Jan 7 10:42:29 2010
22.22% done, estimate finish Thu Jan 7 10:42:25 2010
33.53% done, estimate finish Thu Jan 7 10:42:23 2010
44.73% done, estimate finish Thu Jan 7 10:42:23 2010
55.82% done, estimate finish Thu Jan 7 10:42:22 2010
66.96% done, estimate finish Thu Jan 7 10:42:22 2010
77.78% done, estimate finish Thu Jan 7 10:42:22 2010
89.11% done, estimate finish Thu Jan 7 10:42:22 2010
Total translation table size: 0
Total rockridge attributes bytes: 2867
Total directory bytes: 6630
Path table size(bytes): 46
Max brk space used 0
4500 extents written (8 MB)
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Machine 1 -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gxxx/k3bNh2640.tmp -rational-rock -hide-list /tmp/kde-gxxx/k3bse2640.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-gxxx/k3bKS2640.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-gxxx/k3bDj2640.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Machine 1 -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gxxx/k3bRJ2640.tmp -rational-rock -hide-list /tmp/kde-gxxx/k3bVU2640.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-gxxx/k3bwy2640.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-gxxx/k3bwN2640.tmp
The attempt to write to a CD aborts with "Possible buffer underrrun" & "Try a lower speed" (or similar messages).
I've tried this: http://scdbackup.sourceforge.net/k3b_on_cdrskin.html
but cdrskin does not show in the "Programs" menu under 'cdrecord', so I cannot set it as default.
Anyone got any ideas, please?
My other machine (which also runs Kubuntu Karmic 9.10) has two SATA II HDDs & a normal PATA CD/DVD burner, & I have no problems with it at all.
Kernel: 2.6.31-17-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
Mainboard: Asrock K10N78FullHD-hSLI
http://www.asrock.com/MB/overview.asp?Model=K10N78-1394
OS: Kubuntu 9.10 64-bit
Device:
description: DVD-RAM writer
product: DVDRAM GH22LS50
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /media/cdrom0
version: TL01
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5
mount.fstype = iso9660
mount.options = nosuid,nodev,relatime,utf8
state = mounted
status = ready
hdparm -d1 /dev/xxx
/dev/sr0:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/scd0:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/cdrom:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
HDIO_GET_DMA failed: Inappropriate ioctl for device
/dev/scd0:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device
hdparm -i /dev/scd0
/dev/scd0:
HDIO_DRIVE_CMD(identify) failed: Bad address
Model=HL-DT-ST, FwRev=TL01, SerialNo=K3I99ID5827
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive conforms to: unknown: ATA/ATAPI-3,4,5,6,7
* signifies the current active mode
cdrecord -scanbus
scsibus0:
0,0,0 0) 'HL-DT-ST' 'DVDRAM GH22LS50 ' 'TL01' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
ls -l /usr/bin/cdrecord
lrwxrwxrwx 1 root root 5 2010-01-04 15:30 /usr/bin/cdrecord -> wodim
ls -l /dev/scd0
lrwxrwxrwx 1 root root 3 2010-01-06 14:23 /dev/scd0 -> sr0
Log from k3b:
Devices
-----------------------
HL-DT-ST DVDRAM GH22LS50 TL01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 4500 (9216000 bytes)
System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.4 (KDE 4.3.4)
QT Version: 4.5.2
Kernel: 2.6.31-17-generic
Used versions
-----------------------
mkisofs: 1.1.9
cdrecord: 1.1.9
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22LS50 '
Revision : 'TL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15734 kB/s 89x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 1764 KB/s
Track 01: data 8 MB
Total size: 10 MB (01:00.02) = 4502 sectors
Lout start: 10 MB (01:02/02) = 4502 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
A3 values: 04 C4 80
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 355347
Starting to write CD/DVD at speed 10.0 in dummy TAO mode for multi session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 8 MB written.
Track 01: 1 of 8 MB written (fifo 100%) [buf 95%] 2.9x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 0F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 40s
/usr/bin/wodim: The current problem looks like a buffer underrun.
/usr/bin/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/wodim: Please report.
/usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1079296 bytes
Writing time: 9.300s
Average write speed 6.5x.
Min drive buffer fill was 95%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 25.668s
/usr/bin/wodim: fifo had 146 puts and 18 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -tao -dummy driveropts=burnfree -multi -xa -tsize=4500s -
mkisofs
-----------------------
4500
I: -input-charset not specified, using utf-8 (detected in locale settings)
11.24% done, estimate finish Thu Jan 7 10:42:29 2010
22.22% done, estimate finish Thu Jan 7 10:42:25 2010
33.53% done, estimate finish Thu Jan 7 10:42:23 2010
44.73% done, estimate finish Thu Jan 7 10:42:23 2010
55.82% done, estimate finish Thu Jan 7 10:42:22 2010
66.96% done, estimate finish Thu Jan 7 10:42:22 2010
77.78% done, estimate finish Thu Jan 7 10:42:22 2010
89.11% done, estimate finish Thu Jan 7 10:42:22 2010
Total translation table size: 0
Total rockridge attributes bytes: 2867
Total directory bytes: 6630
Path table size(bytes): 46
Max brk space used 0
4500 extents written (8 MB)
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Machine 1 -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gxxx/k3bNh2640.tmp -rational-rock -hide-list /tmp/kde-gxxx/k3bse2640.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-gxxx/k3bKS2640.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-gxxx/k3bDj2640.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Machine 1 -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gxxx/k3bRJ2640.tmp -rational-rock -hide-list /tmp/kde-gxxx/k3bVU2640.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-gxxx/k3bwy2640.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-gxxx/k3bwN2640.tmp
The attempt to write to a CD aborts with "Possible buffer underrrun" & "Try a lower speed" (or similar messages).
I've tried this: http://scdbackup.sourceforge.net/k3b_on_cdrskin.html
but cdrskin does not show in the "Programs" menu under 'cdrecord', so I cannot set it as default.
Anyone got any ideas, please?
Comment