I am using Kubuntu 9.04 64-bit with an Intel quad-core Q8400 w/4 Gb RAM. I have a Vantec IDE/SATA to USB converter (http://www.newegg.com/Product/Produc...82E16812232002) to hook up my IDE LiteOn DVD burner externally. I used the adapter to install the OS so I know it works fine, but it was with a different drive. I thought it might have been an incompatibility between my adapter and my drive... but it does recognize the device. The drive works fine though as an IDE drive, but I only have 2 IDE devices on my mobo, and need to use them both for HDDs.
Any ideas?
/var/log/messages:
Sep 3 14:50:05 heimlich2 kernel: [544519.241012] usb 1-4: new high speed USB device using ehci_hcd and address 16
Sep 3 14:50:05 heimlich2 kernel: [544519.373987] usb 1-4: configuration #1 chosen from 1 choice
Sep 3 14:50:05 heimlich2 kernel: [544519.374565] scsi14 : SCSI emulation for USB Mass Storage devices
Sep 3 14:50:10 heimlich2 kernel: [544524.381388] scsi 14:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS05 PQ: 0 ANSI: 0
Sep 3 14:50:12 heimlich2 kernel: [544526.847773] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Sep 3 14:50:12 heimlich2 kernel: [544526.849061] sr 14:0:0:0: Attached scsi generic sg6 type 5
Sep 3 14:50:22 heimlich2 kernel: [544536.904524] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:33 heimlich2 kernel: [544547.148024] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:49 heimlich2 kernel: [544563.392022] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:49 heimlich2 kernel: [544563.936023] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:50 heimlich2 kernel: [544564.480017] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:50 heimlich2 kernel: [544565.000014] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:51 heimlich2 kernel: [544565.412034] usb 1-4: USB disconnect, address 16
Sep 3 14:50:51 heimlich2 kernel: [544565.412037] sr 14:0:0:0: Device offlined - not ready after error recovery
Sep 3 14:50:51 heimlich2 kernel: [544565.524527] usb 1-4: new high speed USB device using ehci_hcd and address 17
Sep 3 14:50:51 heimlich2 kernel: [544566.069025] usb 1-4: new high speed USB device using ehci_hcd and address 18
Sep 3 14:50:52 heimlich2 kernel: [544566.612018] usb 1-4: new high speed USB device using ehci_hcd and address 19
Sep 3 14:50:53 heimlich2 kernel: [544567.132021] usb 1-4: new high speed USB device using ehci_hcd and address 20
Sep 3 14:50:53 heimlich2 kernel: [544567.864012] usb 3-2: new full speed USB device using uhci_hcd and address 14
Sep 3 14:50:54 heimlich2 kernel: [544568.593477] usb 3-2: new full speed USB device using uhci_hcd and address 15
Sep 3 14:50:55 heimlich2 kernel: [544569.160525] usb 3-2: new full speed USB device using uhci_hcd and address 16
Sep 3 14:50:55 heimlich2 kernel: [544569.684009] usb 3-2: new full speed USB device using uhci_hcd and address 17
dmesg:
[544519.241012] usb 1-4: new high speed USB device using ehci_hcd and address 16
[544519.373987] usb 1-4: configuration #1 chosen from 1 choice
[544519.374565] scsi14 : SCSI emulation for USB Mass Storage devices
[544519.374638] usb-storage: device found at 16
[544519.374640] usb-storage: waiting for device to settle before scanning
[544524.372272] usb-storage: device scan complete
[544524.381388] scsi 14:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS05 PQ: 0 ANSI: 0
[544526.847773] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[544526.848352] sr 14:0:0:0: Attached scsi CD-ROM sr0
[544526.849061] sr 14:0:0:0: Attached scsi generic sg6 type 5
[544529.117782] end_request: I/O error, dev sr0, sector 0
[544529.117787] Buffer I/O error on device sr0, logical block 0
[544529.119401] end_request: I/O error, dev sr0, sector 0
[544529.119404] Buffer I/O error on device sr0, logical block 0
[544536.904524] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544547.148024] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544563.392022] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544563.504025] usb 1-4: device descriptor read/64, error -71
[544563.720012] usb 1-4: device descriptor read/64, error -71
[544563.936023] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544564.048028] usb 1-4: device descriptor read/64, error -71
[544564.264034] usb 1-4: device descriptor read/64, error -71
[544564.480017] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544564.888009] usb 1-4: device not accepting address 16, error -71
[544565.000014] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544565.412010] usb 1-4: device not accepting address 16, error -71
[544565.412034] usb 1-4: USB disconnect, address 16
[544565.412037] sr 14:0:0:0: Device offlined - not ready after error recovery
[544565.412054] sr 14:0:0:0: rejecting I/O to offline device
[544565.412108] sr 14:0:0:0: rejecting I/O to offline device
[544565.412582] scsi 14:0:0:0: rejecting I/O to dead device
[544565.412595] scsi 14:0:0:0: rejecting I/O to dead device
[544565.412600] scsi 14:0:0:0: rejecting I/O to dead device
[544565.524527] usb 1-4: new high speed USB device using ehci_hcd and address 17
[544565.636016] usb 1-4: device descriptor read/64, error -71
[544565.852013] usb 1-4: device descriptor read/64, error -71
[544566.069025] usb 1-4: new high speed USB device using ehci_hcd and address 18
[544566.181518] usb 1-4: device descriptor read/64, error -71
[544566.396017] usb 1-4: device descriptor read/64, error -71
[544566.612018] usb 1-4: new high speed USB device using ehci_hcd and address 19
[544567.020017] usb 1-4: device not accepting address 19, error -71
[544567.132021] usb 1-4: new high speed USB device using ehci_hcd and address 20
[544567.540010] usb 1-4: device not accepting address 20, error -71
[544567.540027] hub 1-0:1.0: unable to enumerate USB device on port 4
[544567.864012] usb 3-2: new full speed USB device using uhci_hcd and address 14
[544568.040016] usb 3-2: device descriptor read/64, error -71
[544568.320011] usb 3-2: device descriptor read/64, error -71
[544568.593477] usb 3-2: new full speed USB device using uhci_hcd and address 15
[544568.716015] usb 3-2: device descriptor read/64, error -71
[544568.944012] usb 3-2: device descriptor read/64, error -71
[544569.160525] usb 3-2: new full speed USB device using uhci_hcd and address 16
[544569.572012] usb 3-2: device not accepting address 16, error -71
[544569.684009] usb 3-2: new full speed USB device using uhci_hcd and address 17
[544570.092011] usb 3-2: device not accepting address 17, error -71
[544570.092028] hub 3-0:1.0: unable to enumerate USB device on port 2
Any ideas?
/var/log/messages:
Sep 3 14:50:05 heimlich2 kernel: [544519.241012] usb 1-4: new high speed USB device using ehci_hcd and address 16
Sep 3 14:50:05 heimlich2 kernel: [544519.373987] usb 1-4: configuration #1 chosen from 1 choice
Sep 3 14:50:05 heimlich2 kernel: [544519.374565] scsi14 : SCSI emulation for USB Mass Storage devices
Sep 3 14:50:10 heimlich2 kernel: [544524.381388] scsi 14:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS05 PQ: 0 ANSI: 0
Sep 3 14:50:12 heimlich2 kernel: [544526.847773] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Sep 3 14:50:12 heimlich2 kernel: [544526.849061] sr 14:0:0:0: Attached scsi generic sg6 type 5
Sep 3 14:50:22 heimlich2 kernel: [544536.904524] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:33 heimlich2 kernel: [544547.148024] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:49 heimlich2 kernel: [544563.392022] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:49 heimlich2 kernel: [544563.936023] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:50 heimlich2 kernel: [544564.480017] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:50 heimlich2 kernel: [544565.000014] usb 1-4: reset high speed USB device using ehci_hcd and address 16
Sep 3 14:50:51 heimlich2 kernel: [544565.412034] usb 1-4: USB disconnect, address 16
Sep 3 14:50:51 heimlich2 kernel: [544565.412037] sr 14:0:0:0: Device offlined - not ready after error recovery
Sep 3 14:50:51 heimlich2 kernel: [544565.524527] usb 1-4: new high speed USB device using ehci_hcd and address 17
Sep 3 14:50:51 heimlich2 kernel: [544566.069025] usb 1-4: new high speed USB device using ehci_hcd and address 18
Sep 3 14:50:52 heimlich2 kernel: [544566.612018] usb 1-4: new high speed USB device using ehci_hcd and address 19
Sep 3 14:50:53 heimlich2 kernel: [544567.132021] usb 1-4: new high speed USB device using ehci_hcd and address 20
Sep 3 14:50:53 heimlich2 kernel: [544567.864012] usb 3-2: new full speed USB device using uhci_hcd and address 14
Sep 3 14:50:54 heimlich2 kernel: [544568.593477] usb 3-2: new full speed USB device using uhci_hcd and address 15
Sep 3 14:50:55 heimlich2 kernel: [544569.160525] usb 3-2: new full speed USB device using uhci_hcd and address 16
Sep 3 14:50:55 heimlich2 kernel: [544569.684009] usb 3-2: new full speed USB device using uhci_hcd and address 17
dmesg:
[544519.241012] usb 1-4: new high speed USB device using ehci_hcd and address 16
[544519.373987] usb 1-4: configuration #1 chosen from 1 choice
[544519.374565] scsi14 : SCSI emulation for USB Mass Storage devices
[544519.374638] usb-storage: device found at 16
[544519.374640] usb-storage: waiting for device to settle before scanning
[544524.372272] usb-storage: device scan complete
[544524.381388] scsi 14:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS05 PQ: 0 ANSI: 0
[544526.847773] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[544526.848352] sr 14:0:0:0: Attached scsi CD-ROM sr0
[544526.849061] sr 14:0:0:0: Attached scsi generic sg6 type 5
[544529.117782] end_request: I/O error, dev sr0, sector 0
[544529.117787] Buffer I/O error on device sr0, logical block 0
[544529.119401] end_request: I/O error, dev sr0, sector 0
[544529.119404] Buffer I/O error on device sr0, logical block 0
[544536.904524] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544547.148024] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544563.392022] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544563.504025] usb 1-4: device descriptor read/64, error -71
[544563.720012] usb 1-4: device descriptor read/64, error -71
[544563.936023] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544564.048028] usb 1-4: device descriptor read/64, error -71
[544564.264034] usb 1-4: device descriptor read/64, error -71
[544564.480017] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544564.888009] usb 1-4: device not accepting address 16, error -71
[544565.000014] usb 1-4: reset high speed USB device using ehci_hcd and address 16
[544565.412010] usb 1-4: device not accepting address 16, error -71
[544565.412034] usb 1-4: USB disconnect, address 16
[544565.412037] sr 14:0:0:0: Device offlined - not ready after error recovery
[544565.412054] sr 14:0:0:0: rejecting I/O to offline device
[544565.412108] sr 14:0:0:0: rejecting I/O to offline device
[544565.412582] scsi 14:0:0:0: rejecting I/O to dead device
[544565.412595] scsi 14:0:0:0: rejecting I/O to dead device
[544565.412600] scsi 14:0:0:0: rejecting I/O to dead device
[544565.524527] usb 1-4: new high speed USB device using ehci_hcd and address 17
[544565.636016] usb 1-4: device descriptor read/64, error -71
[544565.852013] usb 1-4: device descriptor read/64, error -71
[544566.069025] usb 1-4: new high speed USB device using ehci_hcd and address 18
[544566.181518] usb 1-4: device descriptor read/64, error -71
[544566.396017] usb 1-4: device descriptor read/64, error -71
[544566.612018] usb 1-4: new high speed USB device using ehci_hcd and address 19
[544567.020017] usb 1-4: device not accepting address 19, error -71
[544567.132021] usb 1-4: new high speed USB device using ehci_hcd and address 20
[544567.540010] usb 1-4: device not accepting address 20, error -71
[544567.540027] hub 1-0:1.0: unable to enumerate USB device on port 4
[544567.864012] usb 3-2: new full speed USB device using uhci_hcd and address 14
[544568.040016] usb 3-2: device descriptor read/64, error -71
[544568.320011] usb 3-2: device descriptor read/64, error -71
[544568.593477] usb 3-2: new full speed USB device using uhci_hcd and address 15
[544568.716015] usb 3-2: device descriptor read/64, error -71
[544568.944012] usb 3-2: device descriptor read/64, error -71
[544569.160525] usb 3-2: new full speed USB device using uhci_hcd and address 16
[544569.572012] usb 3-2: device not accepting address 16, error -71
[544569.684009] usb 3-2: new full speed USB device using uhci_hcd and address 17
[544570.092011] usb 3-2: device not accepting address 17, error -71
[544570.092028] hub 3-0:1.0: unable to enumerate USB device on port 2
Comment