In my efforts to solve other problems I have inadvertently managed to stuff up my swap. It's still there, it's just that it never gets automatically enabled whenever I restart the computer. At this point the only way I can get it working is to do it manually - ie go into System Settings --> Disk and Filesystems --> Administrator mode --> Enable partition.
I have two 40gb Hard drives. They look like this:
Disk WDC WD400JB-00ET
1 Partition 13.0 gb (unmounted) /dev/sda1
3 Partition 24.3 gb /home ext3 /dev/sda3 Enabled
Disk WDC WD400JB-00FM
1 Partition 29.3gb (root) /dev/sdb1 Enabled
2 Partition 8.0gb /swap /dev/sdb2 Disabled
I've tried a few times to make the swap enable at boot but to no avail.
Also - I have an unounted 13.0gb section on the first drive. How do I mount this?
I have two 40gb Hard drives. They look like this:
Disk WDC WD400JB-00ET
1 Partition 13.0 gb (unmounted) /dev/sda1
3 Partition 24.3 gb /home ext3 /dev/sda3 Enabled
Disk WDC WD400JB-00FM
1 Partition 29.3gb (root) /dev/sdb1 Enabled
2 Partition 8.0gb /swap /dev/sdb2 Disabled
I've tried a few times to make the swap enable at boot but to no avail.
Also - I have an unounted 13.0gb section on the first drive. How do I mount this?
Comment