hi folks same old problem for me k3b wont burn an audio disc i have had this problem on karmic as well here is the debugging message from k3b
Devices I puchased a new burner all is good
-----------------------
HL-DT-ST DVDRAM GH22NS50 TN01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
System
-----------------------
K3b Version: 1.90.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-16-generic
Used versions
-----------------------
cdrecord: 1.1.10
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22NS50 '
Revision : 'TN01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15251 kB/s 86x CD 11x DVD
FIFO size : 83886080 = 81920 KB
Speed set to 1764 KB/s
pregap1: -1
Track 01: audio 24 MB (02:24.80) no preemp swab copy
Track 02: audio 24 MB (02:24.80) no preemp swab copy
Track 03: audio 30 MB (03:03.54) no preemp swab copy
Track 04: audio 28 MB (02:48.98) no preemp swab copy
Track 05: audio 28 MB (02:51.40) no preemp swab copy
Track 06: audio 24 MB (02:27.49) no preemp swab copy
Track 07: audio 24 MB (02:24.57) no preemp swab copy
Track 08: audio 23 MB (02:22.53) no preemp swab copy
Track 09: audio 26 MB (02:39.93) no preemp swab copy
Track 10: audio 19 MB (01:53.94) no preemp swab copy
Track 11: audio 24 MB (02:25.92) no preemp swab copy
Track 12: audio 17 MB (01:41.46) no preemp swab copy
Track 13: audio 24 MB (02:28.14) no preemp swab copy
Track 14: audio 29 MB (02:52.82) no preemp swab copy
Track 15: audio 28 MB (02:49.28) no preemp swab copy
Track 16: audio 23 MB (02:22.21) no preemp swab copy
Track 17: audio 27 MB (02:44.18) no preemp swab copy
Track 18: audio 38 MB (03:48.97) no preemp swab copy
Track 19: audio 25 MB (02:28.88) no preemp swab copy
Track 20: audio 29 MB (02:56.88) no preemp swab copy
Track 21: audio 36 MB (03:34.60) no preemp swab copy
Track 22: audio 28 MB (02:51.05) no preemp swab copy
Track 23: audio 34 MB (03:24.08) no preemp swab copy
Track 24: audio 26 MB (02:39.06) no preemp swab copy
Track 25: audio 38 MB (03:49.38) no preemp swab copy
Track 26: audio 24 MB (02:23.24) no preemp swab copy
Track 27: audio 42 MB (04:11.22) no preemp swab copy
Track 28: audio 47 MB (04:42.08) no preemp swab copy
Total size: 803 MB (79:35.52) = 358164 sectors
Lout start: 803 MB (79:37/39) = 358164 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11596 (97:27/29)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1685
Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 24 MB written.
Track 01: 1 of 24 MB written (fifo 100%) [buf 95%] 0.4x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 37 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 1333584 bytes
Writing time: 34.897s
Average write speed 137.1x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 0.005s
/usr/bin/wodim: fifo had 1300 puts and 22 gets.
/usr/bin/wodim: fifo was 0 times empty and 12 times full, min fill was 99%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -sao fs=80m
I suspect this is a burner problem as I tried my laptop it works fine the desktop is the one that wont burn ,the burner in my desktop is a lg super multi
regards Ron
Devices I puchased a new burner all is good
-----------------------
HL-DT-ST DVDRAM GH22NS50 TN01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
System
-----------------------
K3b Version: 1.90.0
KDE Version: 4.4.1 (KDE 4.4.1)
QT Version: 4.6.2
Kernel: 2.6.32-16-generic
Used versions
-----------------------
cdrecord: 1.1.10
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22NS50 '
Revision : 'TN01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15251 kB/s 86x CD 11x DVD
FIFO size : 83886080 = 81920 KB
Speed set to 1764 KB/s
pregap1: -1
Track 01: audio 24 MB (02:24.80) no preemp swab copy
Track 02: audio 24 MB (02:24.80) no preemp swab copy
Track 03: audio 30 MB (03:03.54) no preemp swab copy
Track 04: audio 28 MB (02:48.98) no preemp swab copy
Track 05: audio 28 MB (02:51.40) no preemp swab copy
Track 06: audio 24 MB (02:27.49) no preemp swab copy
Track 07: audio 24 MB (02:24.57) no preemp swab copy
Track 08: audio 23 MB (02:22.53) no preemp swab copy
Track 09: audio 26 MB (02:39.93) no preemp swab copy
Track 10: audio 19 MB (01:53.94) no preemp swab copy
Track 11: audio 24 MB (02:25.92) no preemp swab copy
Track 12: audio 17 MB (01:41.46) no preemp swab copy
Track 13: audio 24 MB (02:28.14) no preemp swab copy
Track 14: audio 29 MB (02:52.82) no preemp swab copy
Track 15: audio 28 MB (02:49.28) no preemp swab copy
Track 16: audio 23 MB (02:22.21) no preemp swab copy
Track 17: audio 27 MB (02:44.18) no preemp swab copy
Track 18: audio 38 MB (03:48.97) no preemp swab copy
Track 19: audio 25 MB (02:28.88) no preemp swab copy
Track 20: audio 29 MB (02:56.88) no preemp swab copy
Track 21: audio 36 MB (03:34.60) no preemp swab copy
Track 22: audio 28 MB (02:51.05) no preemp swab copy
Track 23: audio 34 MB (03:24.08) no preemp swab copy
Track 24: audio 26 MB (02:39.06) no preemp swab copy
Track 25: audio 38 MB (03:49.38) no preemp swab copy
Track 26: audio 24 MB (02:23.24) no preemp swab copy
Track 27: audio 42 MB (04:11.22) no preemp swab copy
Track 28: audio 47 MB (04:42.08) no preemp swab copy
Total size: 803 MB (79:35.52) = 358164 sectors
Lout start: 803 MB (79:37/39) = 358164 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11596 (97:27/29)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1685
Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 24 MB written.
Track 01: 1 of 24 MB written (fifo 100%) [buf 95%] 0.4x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 37 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 1333584 bytes
Writing time: 34.897s
Average write speed 137.1x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 0.005s
/usr/bin/wodim: fifo had 1300 puts and 22 gets.
/usr/bin/wodim: fifo was 0 times empty and 12 times full, min fill was 99%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -sao fs=80m
I suspect this is a burner problem as I tried my laptop it works fine the desktop is the one that wont burn ,the burner in my desktop is a lg super multi
regards Ron