Since doing the test in the previous post, I have been having trouble getting consistent results from glmark2-es2-wayland. Sometimes I would get 1462 and other times I would get 5747. I finally found that the problem was in my BIOS settings for the Intel video card. When I changed it to (S/W Controlled), I now get consistent results. I have also done the speed test on Kinetic by logging-in using Plasma (XII).

From the test using the appropriate glmark2 for Plasma (X11) and Plasma (Wayland), I get Wayland 2.23 times faster than X11.

I should also add that to get Wayland to work I had to use Muon to install extra packages. These allowed me to login and benefit from all the progress. In the graphics attached I have all the Muon Wayland packages that are installed

It is now 3 months to go before the release of Kinetic Kudu.

Kinetic is now at the halfway point in the 6 Month development cycle. I continue to enjoy using this system and I must say that the only problem that I have experienced is with LibreOffice. More of this later

The developers continue to do a superb job at providing a very stable system that is a pleasure to use. I am particularly mindful of the current climate challenges and world unrest that must impact on some involved in the development work.

The status of my system at 3 Months compared with the previous month is currently:
As you can see significant updates have been made to Plasma, Frameworks and the Kernel. I have not had any trouble with using the Pre-released updates and I hope I don't experience a total system failure in the future.

Because I have an AMD video card, I can use Wayland which is very fast and a pleasure to use. I continue to find that application font settings are a challenge at times.

My problem with LibreOffice was its impress package. A presentation would always have a white line along the bottom of the screen and another one on the right edge of the screen. I use a black background, so this is particularly noticeable and has even drawn a comment from those who see it. I found that it was present with X11 and Wayland on all my desktops. I eventually found a fault report, but no fix has been found at this stage.

I am extremely pleased with the current progress and I keenly look forward to the progress in the next three months. Once again may thanks to the developers for a truly great system​.

I continue to find that LO Impress on Kinetic does not do a Presentation correctly. The LO versions that I have tried are: 7.3.5.2; 7.4.0.2 and 7.2.5.2

On Plasma X11, LO Impress has a white line on the bottom and right side of the Presentation Screen with the exception of 7.2.5.2 which has no white lines. Videos are played correctly on the Presentation screen, which in my case is an external Monitor. I have the Slide Format "On-screen (16:9)" with the exception of 7.2.5.2 which only provides Screen (16:9).

On Plasma Wayland, LO Impress has the same white line with the exception of LO 7.2.5.2 which is clear with no white lines. The problems with LO Impress become evident when a video is to be viewed. In this case, all versions have a reduced size video overlaid on the control screen as shown in the graphic below. When this happens the projection screen is blank, ie black.



Edit: I have decided to include the basic graphic details of my system which is AMD/ATI. This allows me to use Wayland as against another Laptop that I have with an NVIDIA card which does not work with Wayland. My video details are:
For those with AMD graphic hardware, I would like to know if similar odd behaviour with LO Impress has been experienced with Wayland? Alternately, is there anything I am doing wrong or is this a known bug?

With the last lot of updates, I decided to purged LO version 7.2.5.2 and installed LO version 7.4.0.2 and Impress is now very Impressive and working perfectly. No white lines and the projection image is correctly located on my attached display.

A big Thank-You to all who fixed this problem - WELL DONE.

I upgraded my 22.04 LTS to 22.10 yesterday (konsole, sudo do-release-upgrade -d). It brought in the snap version of Firefox. Surprisingly, it isn't launching or running SLOWLY as it previously did and as others have lamented about. So, I'm not going to go through the documented process by Oshunluvr on ridding ones system of snap and the snap version of Firefox in preference of Firefox's own download version.

It is now 2 months to go before the release of Kinetic Kudu.

Kinetic continues its incredible progress with all packages working very well with the exception of Kdenlive.

The monthly status for my system compared with the previous month is:


Progress continues to be made with Plasma, Frameworks and the Kernel. I continue to not have any trouble with using the Pre-released updates. I checked that my problems with Kdenlive were not related to updates. Kdenlive does work well on my LTS.

As before my AMD video card continues to work with Wayland which is very fast. Font settings continue to be a challenge at times.

It is great to know that others are finding that Kinetic is a great system to use and is very stable. It is a credit to the developers for the progress that has been made​.

The release of Kinetic Kudu is Now in its Final Month.

I continue to enjoy the updates provided by the developers to Kinetic. However, over the past Month, I have had to resort to doing new installations because of my failed attempts to edit the grub menu and change "ubuntu" to "Kubuntu 22.10". All I have achieved so far is to change the font and background image.

Now I realize that many prefer the LTS, but I continue to risk dealing with the latest from the developers. They have not disappointed me in the progress they have made which is shown in the table below.


As before, Plasma, Frameworks and Kernel have been updated to the next versions. By using the Pre-released updates, I continue to have a stable system.

With my AMD video card I get very fast Wayland response. The only problem that I encounter is that, sometimes when I boot, the performance from glmark2-es2-wayland at startup is around 1700 as against 9000? A reboot fixes that, but I have to be careful when using Kinetic in public for projections with LO Impress.

It is great to know that others are finding that Kinetic is a great system to use and is very stable. It continues to be a credit to the developers for the progress they have made.​

Recently I have found that VLC no longer shows a video but the sound is correct when playing an mp4 file. I have tried purging and re-installing VLC, but it still has not got the video showing. VLC works on my LTS which is a separate partition on the same computer. The version that I have is 3.0.17.4 and I am starting to wonder if anyone else has the same problem.

This problem is present on another Laptop with an Nvidia video card and Kinetic installed. I suspect that VLC problems are related to how it was built for Kinetic. I can play mp4 files successfully with either Dragon Player or mpv Media Player, but I prefer the VLC interface and it is the package launched when I select an mp4 file.

There does seem to be an issue. I will come back with a bug report link when one is made.

https://bugs.launchpad.net/ubuntu/+s...c/+bug/1991418

Thanks very much for the bug report which very accurately matches my experience. Great to see so many also reporting it and it looks like a fix is on the way, i.e. posting 9 of the bug report.

For those of you who, like me, need VLC to work, I found that I can get VLC 4.0.0~rc1 from launchpad.net by adding the ppa:
Being a rc1 it is a bit different to the way you control it. There are now two screens. One has the video being played and the other is a control screen that gives you control of the video.

I found that using this rc1 is better than the other multimedia options for playing mp4 files or DVD's.

A fixed vlc package is awaiting approval by the Ubuntu release team

I am wondering if you have tried adding the ppa that I mentioned above, ie sudo add-apt-repository ppa:videolan/master-daily. For my system it works well and I have VLC launching every time I select a mp4 or DVD.

I also get regular updates from the ppa that I now have on my system. So I will be interested to know if you of others have similar success.

PS.
I try to be consistent in my approach. I have been on Kinetic for about 4 months and it has been very reliable for me and well before its official release. So I see no problem in using VLC before its approved release. After all, VLC has been around for a long time and the latest changes are for the latest systems which should not involve too many monumental changes. So I have no hesitancy in using the videolan ppa for VLC which is working very well for me like Kinetic has done in the past.