Hi
I have a VGN-SZ2HP/B Sony Vaio laptop. I have gotten almost everything to work, except the camera. I didn't use it often under windows, but it just annoys me that I can't use it.
I've tried installing motioneye, but still can't get it to work. I'm not even sure it gets recognized (as anything). Here's an lspci output:
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
0000:06:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
0000:07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 15)
0000:09:04.0 CardBus bridge: Texas Instruments: Unknown device 8039
0000:09:04.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a
0000:09:04.2 Mass storage controller: Texas Instruments: Unknown device 803b
I can't get the FN-keys to work under KDE (they all work under GNOME) and I can't get the S1 and S2 keys to work either. This is the output of tail -0f /var/log/acpid (from top down, S1, S2, VOLUME_DOWN and BRIGHTNESS_DOWN (which works)):
[Mon Oct 9 23:32:52 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] notifying client 4533[108:108]
[Mon Oct 9 23:32:52 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] notifying client 4533[108:108]
[Mon Oct 9 23:32:52 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] notifying client 4533[108:108]
[Mon Oct 9 23:33:31 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] notifying client 4533[108:108]
[Mon Oct 9 23:33:31 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:34:14 2006] received event "sony/hotkey SPIC 00000001 0000000e"
[Mon Oct 9 23:34:14 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:14 2006] executing action "/etc/acpi/voldownbtn.sh"
[Mon Oct 9 23:34:14 2006] BEGIN HANDLER MESSAGES
[Mon Oct 9 23:34:14 2006] END HANDLER MESSAGES
[Mon Oct 9 23:34:14 2006] action exited with status 0
[Mon Oct 9 23:34:14 2006] completed event "sony/hotkey SPIC 00000001 0000000e"
[Mon Oct 9 23:34:14 2006] received event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:14 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:14 2006] completed event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:44 2006] received event "sony/hotkey SPIC 00000001 00000010"
[Mon Oct 9 23:34:44 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:44 2006] executing action "/etc/acpi/sonybright.sh down"
[Mon Oct 9 23:34:44 2006] BEGIN HANDLER MESSAGES
[Mon Oct 9 23:34:44 2006] END HANDLER MESSAGES
[Mon Oct 9 23:34:44 2006] action exited with status 2
[Mon Oct 9 23:34:44 2006] completed event "sony/hotkey SPIC 00000001 00000010"
[Mon Oct 9 23:34:44 2006] received event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:44 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:44 2006] completed event "sony/hotkey SPIC 00000001 0000003b"
I'm not able to just assign certain applications or commands for example the shortcut S1 in System Settings -> Regional and Accesiibility -> Keyboard shortcuts, otherwise that would of course be the way.
As with everything in Linux, can't I just put a script somewhere and it will all work?
Thanks!
I have a VGN-SZ2HP/B Sony Vaio laptop. I have gotten almost everything to work, except the camera. I didn't use it often under windows, but it just annoys me that I can't use it.
I've tried installing motioneye, but still can't get it to work. I'm not even sure it gets recognized (as anything). Here's an lspci output:
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
0000:06:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
0000:07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 15)
0000:09:04.0 CardBus bridge: Texas Instruments: Unknown device 8039
0000:09:04.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a
0000:09:04.2 Mass storage controller: Texas Instruments: Unknown device 803b
I can't get the FN-keys to work under KDE (they all work under GNOME) and I can't get the S1 and S2 keys to work either. This is the output of tail -0f /var/log/acpid (from top down, S1, S2, VOLUME_DOWN and BRIGHTNESS_DOWN (which works)):
[Mon Oct 9 23:32:52 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] notifying client 4533[108:108]
[Mon Oct 9 23:32:52 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:32:52 2006] notifying client 4533[108:108]
[Mon Oct 9 23:32:52 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] notifying client 4533[108:108]
[Mon Oct 9 23:33:31 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] received event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:33:31 2006] notifying client 4533[108:108]
[Mon Oct 9 23:33:31 2006] completed event "sony/hotkey SPIC 00000001 00000020"
[Mon Oct 9 23:34:14 2006] received event "sony/hotkey SPIC 00000001 0000000e"
[Mon Oct 9 23:34:14 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:14 2006] executing action "/etc/acpi/voldownbtn.sh"
[Mon Oct 9 23:34:14 2006] BEGIN HANDLER MESSAGES
[Mon Oct 9 23:34:14 2006] END HANDLER MESSAGES
[Mon Oct 9 23:34:14 2006] action exited with status 0
[Mon Oct 9 23:34:14 2006] completed event "sony/hotkey SPIC 00000001 0000000e"
[Mon Oct 9 23:34:14 2006] received event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:14 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:14 2006] completed event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:44 2006] received event "sony/hotkey SPIC 00000001 00000010"
[Mon Oct 9 23:34:44 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:44 2006] executing action "/etc/acpi/sonybright.sh down"
[Mon Oct 9 23:34:44 2006] BEGIN HANDLER MESSAGES
[Mon Oct 9 23:34:44 2006] END HANDLER MESSAGES
[Mon Oct 9 23:34:44 2006] action exited with status 2
[Mon Oct 9 23:34:44 2006] completed event "sony/hotkey SPIC 00000001 00000010"
[Mon Oct 9 23:34:44 2006] received event "sony/hotkey SPIC 00000001 0000003b"
[Mon Oct 9 23:34:44 2006] notifying client 4533[108:108]
[Mon Oct 9 23:34:44 2006] completed event "sony/hotkey SPIC 00000001 0000003b"
I'm not able to just assign certain applications or commands for example the shortcut S1 in System Settings -> Regional and Accesiibility -> Keyboard shortcuts, otherwise that would of course be the way.
As with everything in Linux, can't I just put a script somewhere and it will all work?
Thanks!
Comment