How make biger refresh rate?

[alikas]

In "System Setings", "Display", "Screen size: 800x600", "Refresh rate: 60 Hz". And it is bigest refresh rate, that possible choose.
My video card is "Ati rage pro".
"Ati" driver looks is instaled.
But why, I can not choose biger refresh rate?
There my "xorg.conf" file content:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "ATI Technologies, Inc. 3D Rage Pro (AGP)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. 3D Rage Pro (AGP)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

[kit89]

Re: How make biger refresh rate?

Before doing any modifications, with refresh rate I suggest you do a backup & find out what are the max limits for your monitor. As if you put the Refresh Rate to high the screen will go Blank.

If it does go Blank, I sugest pressing Ctrl + Alt + (F1 or F2 or F3 etc), then the command line should appear so you can recover your system.

The lines you need to change to increase Refresh Rate are:

HorizSync 28-51
VertRefresh 43-60

Which can be found in the "monitor" section.

I havent done much with the Refresh Rates. But I can tell you that VertRefresh affect the Vertical(up and down) rate and the HorizSync affects the Horizontal(left to right) rate.

Hope this helps you.

[Rog131]

Re: How make biger refresh rate?

Maybe this helps:
Howto: change resolution/refresh rate in Xorg
http://ubuntuforums.org/showthread.php?t=83973