Announcement

Collapse
No announcement yet.

Display problems with a Dell Latitude D820

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Display problems with a Dell Latitude D820

    My notebook is a Dell Latitude D820 with a 15.6 inch monitor, an Intel Centrino Duo-core x86_64 processor model 15 1GHz with 4 Gig of Ram and a 320Gb hard drive. The monitor is a 15.6" and is driven by Nvidia Quatro NVS 120 drivers.
    I just upgraded from Natty to 12.10 with KDE 4.9.3 and GRUB 0.97-29 last night and the problem showed up right away.

    My problem is the "natural setting " for my monitor is a LVDS 1920x1200 @ 60 Hz. I need to change it to 1024x768 or 1200x800 because my eyesight is bad and I can barely read it at 1920x1200 even with glasses. I have gone in and edited the xorg.conf file to add other monitor sizes, but the new 12.10 does not recognize the xorg.conf settings at all. I changed the nvidia-current-settings to updated nvidia settings, and that did not help either.

    Can you tell me how to change the settings so I can read my notebook again, or do I just need to dump 12.10 and go back to natty where the drivers work fine. I am not a complete newbie, but this has got me stumped.

    Thanks,
    Robert
    Tags: 12.10, nvidia
    • Top
    • Bottom
    #2
    A couple of comments:

    1. Your assumption that 12.10 does not "recognise" xorg.conf settings is incorrect. I myself use an xorg.conf file and it loaded first time without question. The problem lies with your configuration or your install. I was unaware that the Quatro GPUs had their own set of drivers, so I can't help you there. Xorg.conf is no longer created by default, but is still used automatically when present. I suggest a review of your xorg.conf and log files is a good place to start.

    2. There are several ways to temporarily or permanently change your resolution and they are covered by literally dozens if not hundreds of posts on this forum. Please search and attempt previously documented solutions prior to posting a request for help. This will help keep the forums from being overloaded with redundant postings.

    3. While your monitor will certainly display resolutions other than the native one, it almost always results in less-than-optimum clarity. You might consider installing the "Accessability" packages and enlarging font size instead of using a non-native resolution. Obviously, if you're satisfied with the lower resolution then do what works best for you.

    Please Read Me
    • Top
    • Bottom

    Comment

      #3
      Originally posted by oshunluvr View Post
      A couple of comments:

      1. Your assumption that 12.10 does not "recognise" xorg.conf settings is incorrect. I myself use an xorg.conf file and it loaded first time without question. The problem lies with your configuration or your install. I was unaware that the Quatro GPUs had their own set of drivers, so I can't help you there. Xorg.conf is no longer created by default, but is still used automatically when present. I suggest a review of your xorg.conf and log files is a good place to start.

      2. There are several ways to temporarily or permanently change your resolution and they are covered by literally dozens if not hundreds of posts on this forum. Please search and attempt previously documented solutions prior to posting a request for help. This will help keep the forums from being overloaded with redundant postings.

      3. While your monitor will certainly display resolutions other than the native one, it almost always results in less-than-optimum clarity. You might consider installing the "Accessability" packages and enlarging font size instead of using a non-native resolution. Obviously, if you're satisfied with the lower resolution then do what works best for you.

      Oshunluvr, thanks for your comments. I created a new xorg.conf with Compiz and the system still does not recognize it. There is nothing in the logs about this because there are no errors. It is not an error situation, it is that 12.10 only pulls the "Native Settings" and does not look at the Xorg.conf at all from what I can tell. There has to be a setting somewhere else besides in xorg.conf.
      • Top
      • Bottom

      Comment

        #4
        Compiz is not a KDE componant so it's likely going to be difficult to figure out what's happening if you're using it. I have no experience at all with compiz. It possible the upgrade path you've chosen has left some undesirable config files behind.

        If you want to post your files I'll take a look. You'll have to copy the log file (/var/log/Xorg.0.log) and change it's ownership/group to your user. Then rename it .txt and attach it to a post. Do the same with /etc/X11/xorg.conf.

        Please Read Me
        • Top
        • Bottom

        Comment

          #5
          Originally posted by oshunluvr View Post
          Compiz is not a KDE componant so it's likely going to be difficult to figure out what's happening if you're using it. I have no experience at all with compiz. It possible the upgrade path you've chosen has left some undesirable config files behind.

          If you want to post your files I'll take a look. You'll have to copy the log file (/var/log/Xorg.0.log) and change it's ownership/group to your user. Then rename it .txt and attach it to a post. Do the same with /etc/X11/xorg.conf.
          Here is the file requested:

          [ 21.334]
          X.Org X Server 1.13.0
          Release Date: 2012-09-05
          [ 21.334] X Protocol Version 11, Revision 0
          [ 21.334] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
          [ 21.334] Current Operating System: Linux fuzzy-Latitude-D820 3.5.0-19-generic #30-Ubuntu SMP Tue Nov 13 17:48:01 UTC 2012 x86_64
          [ 21.334] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic root=UUID=7ba45f04-9865-4ab8-af14-c7eed8e951dd ro quiet splash
          [ 21.334] Build Date: 27 November 2012 07:44:35AM
          [ 21.334] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
          [ 21.334] Current version of pixman: 0.26.0
          [ 21.334] Before reporting problems, check http://wiki.x.org
          to make sure that you have the latest version.
          [ 21.334] Markers: (--) probed, (**) from config file, (==) default setting,
          (++) from command line, (!!) notice, (II) informational,
          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
          [ 21.343] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 18 14:55:47 2012
          [ 21.345] (==) Using config file: "/etc/X11/xorg.conf"
          [ 21.345] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
          [ 21.347] (==) ServerLayout "Layout0"
          [ 21.347] (**) |-->Screen "Screen0" (0)
          [ 21.347] (**) | |-->Monitor "Monitor0"
          [ 21.348] (**) | |-->Device "Device0"
          [ 21.348] (**) |-->Input Device "Keyboard0"
          [ 21.348] (**) |-->Input Device "Mouse0"
          [ 21.350] (**) Option "Xinerama" "0"
          [ 21.350] (==) Automatically adding devices
          [ 21.350] (==) Automatically enabling devices
          [ 21.350] (==) Automatically adding GPU devices
          [ 21.351] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
          [ 21.351] Entry deleted from font path.
          [ 21.351] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
          [ 21.351] Entry deleted from font path.
          [ 21.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
          [ 21.352] Entry deleted from font path.
          [ 21.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
          [ 21.352] Entry deleted from font path.
          [ 21.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
          [ 21.352] Entry deleted from font path.
          [ 21.352] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
          [ 21.352] Entry deleted from font path.
          [ 21.352] (==) FontPath set to:
          /usr/share/fonts/X11/misc,
          /usr/share/fonts/X11/Type1,
          built-ins
          [ 21.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
          [ 21.353] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
          [ 21.353] (WW) Disabling Keyboard0
          [ 21.353] (WW) Disabling Mouse0
          [ 21.353] (II) Loader magic: 0x7f4615e11c40
          [ 21.353] (II) Module ABI versions:
          [ 21.353] X.Org ANSI C Emulation: 0.4
          [ 21.355] X.Org Video Driver: 13.0
          [ 21.355] X.Org XInput driver : 18.0
          [ 21.359] X.Org Server Extension : 7.0
          [ 21.361] (--) PCI:*(0:1:0:0) 10de:01d8:1028:01cc rev 161, Mem @ 0xed000000/16777216, 0xd0000000/268435456, 0xee000000/16777216, BIOS @ 0x??/131072
          [ 21.361] (II) Open ACPI successful (/var/run/acpid.socket)
          [ 21.361] Initializing built-in extension Generic Event Extension
          [ 21.361] Initializing built-in extension SHAPE
          [ 21.361] Initializing built-in extension MIT-SHM
          [ 21.361] Initializing built-in extension XInputExtension
          [ 21.361] Initializing built-in extension XTEST
          [ 21.361] Initializing built-in extension BIG-REQUESTS
          [ 21.361] Initializing built-in extension SYNC
          [ 21.361] Initializing built-in extension XKEYBOARD
          [ 21.361] Initializing built-in extension XC-MISC
          [ 21.361] Initializing built-in extension SECURITY
          [ 21.361] Initializing built-in extension XINERAMA
          [ 21.361] Initializing built-in extension XFIXES
          [ 21.361] Initializing built-in extension RENDER
          [ 21.361] Initializing built-in extension RANDR
          [ 21.361] Initializing built-in extension COMPOSITE
          [ 21.361] Initializing built-in extension DAMAGE
          [ 21.361] Initializing built-in extension MIT-SCREEN-SAVER
          [ 21.361] Initializing built-in extension DOUBLE-BUFFER
          [ 21.361] Initializing built-in extension RECORD
          [ 21.361] Initializing built-in extension DPMS
          [ 21.361] Initializing built-in extension X-Resource
          [ 21.361] Initializing built-in extension XVideo
          [ 21.361] Initializing built-in extension XVideo-MotionCompensation
          [ 21.361] Initializing built-in extension XFree86-VidModeExtension
          [ 21.361] Initializing built-in extension XFree86-DGA
          [ 21.362] Initializing built-in extension XFree86-DRI
          [ 21.362] Initializing built-in extension DRI2
          [ 21.362] (II) LoadModule: "glx"
          [ 21.362] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
          [ 22.565] (II) Module glx: vendor="NVIDIA Corporation"
          [ 22.565] compiled for 4.0.2, module version = 1.0.0
          [ 22.565] Module class: X.Org Server Extension
          [ 22.565] (II) NVIDIA GLX Module 304.51 Tue Sep 18 17:38:06 PDT 2012
          [ 22.565] Loading extension GLX
          [ 22.565] (II) LoadModule: "nvidia"
          [ 22.565] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
          [ 22.580] (II) Module nvidia: vendor="NVIDIA Corporation"
          [ 22.580] compiled for 4.0.2, module version = 1.0.0
          [ 22.580] Module class: X.Org Video Driver
          [ 22.580] (II) NVIDIA dlloader X Driver 304.51 Tue Sep 18 17:18:40 PDT 2012
          [ 22.580] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
          [ 22.580] (++) using VT number 7

          [ 22.582] (II) Loading sub module "fb"
          [ 22.582] (II) LoadModule: "fb"
          [ 22.598] (II) Loading /usr/lib/xorg/modules/libfb.so
          [ 22.599] (II) Module fb: vendor="X.Org Foundation"
          [ 22.599] compiled for 1.13.0, module version = 1.0.0
          [ 22.599] ABI class: X.Org ANSI C Emulation, version 0.4
          [ 22.599] (II) Loading sub module "wfb"
          [ 22.599] (II) LoadModule: "wfb"
          [ 22.599] (II) Loading /usr/lib/xorg/modules/libwfb.so
          [ 22.599] (II) Module wfb: vendor="X.Org Foundation"
          [ 22.599] compiled for 1.13.0, module version = 1.0.0
          [ 22.599] ABI class: X.Org ANSI C Emulation, version 0.4
          [ 22.599] (II) Loading sub module "ramdac"
          [ 22.599] (II) LoadModule: "ramdac"
          [ 22.599] (II) Module "ramdac" already built-in
          [ 22.599] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
          [ 22.599] (==) NVIDIA(0): RGB weight 888
          [ 22.599] (==) NVIDIA(0): Default visual is TrueColor
          [ 22.599] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
          [ 22.599] (**) NVIDIA(0): Option "Stereo" "0"
          [ 22.599] (**) NVIDIA(0): Stereo disabled by request
          [ 22.599] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
          [ 22.599] (**) NVIDIA(0): Enabling 2D acceleration
          [ 24.021] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 24.021] (II) NVIDIA(GPU-0): Vision stereo.
          [ 24.023] (II) NVIDIA(0): NVIDIA GPU GeForce Go 7400 (G72) at PCI:1:0:0 (GPU-0)
          [ 24.023] (--) NVIDIA(0): Memory: 524288 kBytes
          [ 24.023] (--) NVIDIA(0): VideoBIOS: 05.72.22.21.fe
          [ 24.023] (II) NVIDIA(0): Detected PCI Express Link width: 16X
          [ 24.023] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
          [ 24.023] (--) NVIDIA(0): Valid display device(s) on GeForce Go 7400 at PCI:1:0:0
          [ 24.023] (--) NVIDIA(0): CRT-0
          [ 24.023] (--) NVIDIA(0): TV-0
          [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0) (connected)
          [ 24.023] (--) NVIDIA(0): DFP-1
          [ 24.023] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
          [ 24.023] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
          [ 24.023] (--) NVIDIA(0): TV encoder: (null)
          [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
          [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
          [ 24.023] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
          [ 24.023] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
          [ 24.023] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 24.023] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 24.023] (**) NVIDIA(0): been enabled on all display devices.)
          [ 24.024] (II) NVIDIA(0): Validated MetaModes:
          [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
          [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
          [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
          [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
          [ 24.024] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
          [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
          [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
          [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1500 x 1200 +210 +0
          [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
          [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
          [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
          [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
          [ 24.025] (--) NVIDIA(0): DPI set to (147, 145); computed from "UseEdidDpi" X config
          [ 24.025] (--) NVIDIA(0): option
          [ 24.026] (--) Depth 24 pixmap format is 32 bpp
          [ 24.033] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
          [ 25.431] Loading extension NV-GLX
          [ 25.463] (==) NVIDIA(0): Disabling shared memory pixmaps
          [ 25.463] (==) NVIDIA(0): Backing store disabled
          [ 25.463] (==) NVIDIA(0): Silken mouse enabled
          [ 25.463] (**) NVIDIA(0): DPMS enabled
          [ 25.463] Loading extension NV-CONTROL
          [ 25.464] Loading extension XINERAMA
          [ 25.464] (II) Loading sub module "dri2"
          [ 25.464] (II) LoadModule: "dri2"
          [ 25.464] (II) Module "dri2" already built-in
          [ 25.464] (II) NVIDIA(0): [DRI2] Setup complete
          [ 25.464] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
          [ 25.464] (--) RandR disabled
          [ 25.469] (II) Initializing extension GLX
          [ 25.615] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
          [ 25.618] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
          [ 25.618] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
          [ 25.618] (II) LoadModule: "evdev"
          [ 25.618] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
          [ 25.619] (II) Module evdev: vendor="X.Org Foundation"
          [ 25.619] compiled for 1.13.0, module version = 2.7.3
          [ 25.619] Module class: X.Org XInput Driver
          [ 25.619] ABI class: X.Org XInput driver, version 18.0
          [ 25.619] (II) Using input driver 'evdev' for 'Video Bus'
          [ 25.619] (**) Video Bus: always reports core events
          [ 25.619] (**) evdev: Video Bus: Device: "/dev/input/event4"
          [ 25.619] (--) evdev: Video Bus: Vendor 0 Product 0x6
          [ 25.619] (--) evdev: Video Bus: Found keys
          [ 25.619] (II) evdev: Video Bus: Configuring as keyboard
          [ 25.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input4/event4"
          [ 25.619] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
          [ 25.619] (**) Option "xkb_rules" "evdev"
          [ 25.619] (**) Option "xkb_model" "pc105"
          [ 25.619] (**) Option "xkb_layout" "us"
          [ 25.619] (II) config/udev: Adding input device Power Button (/dev/input/event1)
          [ 25.619] (**) Power Button: Applying InputClass "evdev keyboard catchall"
          [ 25.619] (II) Using input driver 'evdev' for 'Power Button'
          [ 25.619] (**) Power Button: always reports core events
          [ 25.619] (**) evdev: Power Button: Device: "/dev/input/event1"
          [ 25.619] (--) evdev: Power Button: Vendor 0 Product 0x1
          [ 25.620] (--) evdev: Power Button: Found keys
          [ 25.620] (II) evdev: Power Button: Configuring as keyboard
          [ 25.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
          [ 25.620] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
          [ 25.620] (**) Option "xkb_rules" "evdev"
          [ 25.620] (**) Option "xkb_model" "pc105"
          [ 25.620] (**) Option "xkb_layout" "us"
          [ 25.620] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
          [ 25.620] (II) No input driver specified, ignoring this device.
          [ 25.620] (II) This device may have been added with another device file.
          [ 25.620] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
          [ 25.620] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
          [ 25.620] (II) Using input driver 'evdev' for 'Sleep Button'
          [ 25.620] (**) Sleep Button: always reports core events
          [ 25.620] (**) evdev: Sleep Button: Device: "/dev/input/event2"
          [ 25.620] (--) evdev: Sleep Button: Vendor 0 Product 0x3
          [ 25.620] (--) evdev: Sleep Button: Found keys
          [ 25.620] (II) evdev: Sleep Button: Configuring as keyboard
          [ 25.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
          [ 25.620] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
          [ 25.620] (**) Option "xkb_rules" "evdev"
          [ 25.620] (**) Option "xkb_model" "pc105"
          [ 25.621] (**) Option "xkb_layout" "us"
          [ 25.621] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event5)
          [ 25.621] (II) No input driver specified, ignoring this device.
          [ 25.621] (II) This device may have been added with another device file.
          [ 25.621] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
          [ 25.621] (II) No input driver specified, ignoring this device.
          [ 25.621] (II) This device may have been added with another device file.
          [ 25.622] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
          [ 25.622] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
          [ 25.622] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
          [ 25.622] (**) AT Translated Set 2 keyboard: always reports core events
          [ 25.622] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
          [ 25.622] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
          [ 25.622] (--) evdev: AT Translated Set 2 keyboard: Found keys
          [ 25.622] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
          [ 25.622] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
          [ 25.622] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
          [ 25.622] (**) Option "xkb_rules" "evdev"
          [ 25.622] (**) Option "xkb_model" "pc105"
          [ 25.622] (**) Option "xkb_layout" "us"
          [ 25.622] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event8)
          [ 25.622] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
          [ 25.622] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"
          [ 25.622] (II) Using input driver 'evdev' for 'DualPoint Stick'
          [ 25.622] (**) DualPoint Stick: always reports core events
          [ 25.622] (**) evdev: DualPoint Stick: Device: "/dev/input/event8"
          [ 25.622] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
          [ 25.622] (--) evdev: DualPoint Stick: Found 3 mouse buttons
          [ 25.622] (--) evdev: DualPoint Stick: Found relative axes
          [ 25.622] (--) evdev: DualPoint Stick: Found x and y relative axes
          [ 25.622] (II) evdev: DualPoint Stick: Configuring as mouse
          [ 25.622] (**) Option "Emulate3Buttons" "true"
          [ 25.623] (**) Option "EmulateWheel" "true"
          [ 25.623] (**) Option "EmulateWheelButton" "2"
          [ 25.623] (**) Option "YAxisMapping" "4 5"
          [ 25.623] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
          [ 25.623] (**) Option "XAxisMapping" "6 7"
          [ 25.623] (**) evdev: DualPoint Stick: XAxisMapping: buttons 6 and 7
          [ 25.623] (**) evdev: DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
          [ 25.623] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
          [ 25.623] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 10)
          [ 25.623] (II) evdev: DualPoint Stick: initialized for relative axes.
          [ 25.623] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
          [ 25.623] (**) DualPoint Stick: (accel) acceleration profile 0
          [ 25.623] (**) DualPoint Stick: (accel) acceleration factor: 2.000
          [ 25.623] (**) DualPoint Stick: (accel) acceleration threshold: 4
          [ 25.623] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
          [ 25.623] (II) No input driver specified, ignoring this device.
          [ 25.623] (II) This device may have been added with another device file.
          [ 25.623] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event9)
          [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
          [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
          [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
          [ 25.623] (II) LoadModule: "synaptics"
          [ 25.624] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
          [ 25.624] (II) Module synaptics: vendor="X.Org Foundation"
          [ 25.624] compiled for 1.12.99.905, module version = 1.6.2
          [ 25.624] Module class: X.Org XInput Driver
          [ 25.624] ABI class: X.Org XInput driver, version 18.0
          [ 25.624] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
          [ 25.624] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
          [ 25.624] (**) Option "Device" "/dev/input/event9"
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
          [ 25.624] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
          [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
          [ 25.624] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
          [ 25.624] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
          [ 25.624] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 11)
          [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
          [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
          [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156
          [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
          [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
          [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
          [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
          [ 25.625] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
          [ 25.625] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
          [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
          [ 25.627] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
          [ 25.627] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
          [ 25.627] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
          [ 25.627] (**) Dell WMI hotkeys: always reports core events
          [ 25.627] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
          [ 25.627] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
          [ 25.627] (--) evdev: Dell WMI hotkeys: Found keys
          [ 25.627] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
          [ 25.627] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
          [ 25.627] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
          [ 25.627] (**) Option "xkb_rules" "evdev"
          [ 25.627] (**) Option "xkb_model" "pc105"
          [ 25.627] (**) Option "xkb_layout" "us"
          [ 42.930] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 42.930] (II) NVIDIA(GPU-0): Vision stereo.
          [ 42.930] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 42.930] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 42.930] (**) NVIDIA(0): been enabled on all display devices.)
          [ 42.952] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 42.952] (II) NVIDIA(GPU-0): Vision stereo.
          [ 42.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 42.952] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 42.952] (**) NVIDIA(0): been enabled on all display devices.)
          [ 46.910] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 47.123] (II) NVIDIA(GPU-0): Vision stereo.
          [ 47.123] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 47.123] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 47.123] (**) NVIDIA(0): been enabled on all display devices.)
          [ 84.561] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 84.561] (II) NVIDIA(GPU-0): Vision stereo.
          [ 84.561] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 84.561] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 84.561] (**) NVIDIA(0): been enabled on all display devices.)
          [ 141.792] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 141.792] (II) NVIDIA(GPU-0): Vision stereo.
          [ 141.792] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 141.792] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 141.792] (**) NVIDIA(0): been enabled on all display devices.)
          [ 141.815] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 141.816] (II) NVIDIA(GPU-0): Vision stereo.
          [ 141.816] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 141.816] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 141.816] (**) NVIDIA(0): been enabled on all display devices.)
          [ 234.651] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
          [ 234.651] (II) NVIDIA(GPU-0): Vision stereo.
          [ 234.651] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
          [ 234.651] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
          [ 234.651] (**) NVIDIA(0): been enabled on all display devices.)
          • Top
          • Bottom

          Comment

            #6
            Originally posted by NativeGeorgian View Post
            Here is the file requested:

            [ 21.334]
            X.Org X Server 1.13.0
            Release Date: 2012-09-05
            [ 21.334] X Protocol Version 11, Revision 0
            [ 21.334] Build Operating System: Linux 3.2.0-32-generic x86_64 Ubuntu
            [ 21.334] Current Operating System: Linux fuzzy-Latitude-D820 3.5.0-19-generic #30-Ubuntu SMP Tue Nov 13 17:48:01 UTC 2012 x86_64
            [ 21.334] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic root=UUID=7ba45f04-9865-4ab8-af14-c7eed8e951dd ro quiet splash
            [ 21.334] Build Date: 27 November 2012 07:44:35AM
            [ 21.334] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
            [ 21.334] Current version of pixman: 0.26.0
            [ 21.334] Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
            [ 21.334] Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
            [ 21.343] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 18 14:55:47 2012
            [ 21.345] (==) Using config file: "/etc/X11/xorg.conf"
            [ 21.345] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
            [ 21.347] (==) ServerLayout "Layout0"
            [ 21.347] (**) |-->Screen "Screen0" (0)
            [ 21.347] (**) | |-->Monitor "Monitor0"
            [ 21.348] (**) | |-->Device "Device0"
            [ 21.348] (**) |-->Input Device "Keyboard0"
            [ 21.348] (**) |-->Input Device "Mouse0"
            [ 21.350] (**) Option "Xinerama" "0"
            [ 21.350] (==) Automatically adding devices
            [ 21.350] (==) Automatically enabling devices
            [ 21.350] (==) Automatically adding GPU devices
            [ 21.351] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
            [ 21.351] Entry deleted from font path.
            [ 21.351] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
            [ 21.351] Entry deleted from font path.
            [ 21.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
            [ 21.352] Entry deleted from font path.
            [ 21.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
            [ 21.352] Entry deleted from font path.
            [ 21.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
            [ 21.352] Entry deleted from font path.
            [ 21.352] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
            [ 21.352] Entry deleted from font path.
            [ 21.352] (==) FontPath set to:
            /usr/share/fonts/X11/misc,
            /usr/share/fonts/X11/Type1,
            built-ins
            [ 21.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
            [ 21.353] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
            [ 21.353] (WW) Disabling Keyboard0
            [ 21.353] (WW) Disabling Mouse0
            [ 21.353] (II) Loader magic: 0x7f4615e11c40
            [ 21.353] (II) Module ABI versions:
            [ 21.353] X.Org ANSI C Emulation: 0.4
            [ 21.355] X.Org Video Driver: 13.0
            [ 21.355] X.Org XInput driver : 18.0
            [ 21.359] X.Org Server Extension : 7.0
            [ 21.361] (--) PCI:*(0:1:0:0) 10de:01d8:1028:01cc rev 161, Mem @ 0xed000000/16777216, 0xd0000000/268435456, 0xee000000/16777216, BIOS @ 0x??/131072
            [ 21.361] (II) Open ACPI successful (/var/run/acpid.socket)
            [ 21.361] Initializing built-in extension Generic Event Extension
            [ 21.361] Initializing built-in extension SHAPE
            [ 21.361] Initializing built-in extension MIT-SHM
            [ 21.361] Initializing built-in extension XInputExtension
            [ 21.361] Initializing built-in extension XTEST
            [ 21.361] Initializing built-in extension BIG-REQUESTS
            [ 21.361] Initializing built-in extension SYNC
            [ 21.361] Initializing built-in extension XKEYBOARD
            [ 21.361] Initializing built-in extension XC-MISC
            [ 21.361] Initializing built-in extension SECURITY
            [ 21.361] Initializing built-in extension XINERAMA
            [ 21.361] Initializing built-in extension XFIXES
            [ 21.361] Initializing built-in extension RENDER
            [ 21.361] Initializing built-in extension RANDR
            [ 21.361] Initializing built-in extension COMPOSITE
            [ 21.361] Initializing built-in extension DAMAGE
            [ 21.361] Initializing built-in extension MIT-SCREEN-SAVER
            [ 21.361] Initializing built-in extension DOUBLE-BUFFER
            [ 21.361] Initializing built-in extension RECORD
            [ 21.361] Initializing built-in extension DPMS
            [ 21.361] Initializing built-in extension X-Resource
            [ 21.361] Initializing built-in extension XVideo
            [ 21.361] Initializing built-in extension XVideo-MotionCompensation
            [ 21.361] Initializing built-in extension XFree86-VidModeExtension
            [ 21.361] Initializing built-in extension XFree86-DGA
            [ 21.362] Initializing built-in extension XFree86-DRI
            [ 21.362] Initializing built-in extension DRI2
            [ 21.362] (II) LoadModule: "glx"
            [ 21.362] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
            [ 22.565] (II) Module glx: vendor="NVIDIA Corporation"
            [ 22.565] compiled for 4.0.2, module version = 1.0.0
            [ 22.565] Module class: X.Org Server Extension
            [ 22.565] (II) NVIDIA GLX Module 304.51 Tue Sep 18 17:38:06 PDT 2012
            [ 22.565] Loading extension GLX
            [ 22.565] (II) LoadModule: "nvidia"
            [ 22.565] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
            [ 22.580] (II) Module nvidia: vendor="NVIDIA Corporation"
            [ 22.580] compiled for 4.0.2, module version = 1.0.0
            [ 22.580] Module class: X.Org Video Driver
            [ 22.580] (II) NVIDIA dlloader X Driver 304.51 Tue Sep 18 17:18:40 PDT 2012
            [ 22.580] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
            [ 22.580] (++) using VT number 7

            [ 22.582] (II) Loading sub module "fb"
            [ 22.582] (II) LoadModule: "fb"
            [ 22.598] (II) Loading /usr/lib/xorg/modules/libfb.so
            [ 22.599] (II) Module fb: vendor="X.Org Foundation"
            [ 22.599] compiled for 1.13.0, module version = 1.0.0
            [ 22.599] ABI class: X.Org ANSI C Emulation, version 0.4
            [ 22.599] (II) Loading sub module "wfb"
            [ 22.599] (II) LoadModule: "wfb"
            [ 22.599] (II) Loading /usr/lib/xorg/modules/libwfb.so
            [ 22.599] (II) Module wfb: vendor="X.Org Foundation"
            [ 22.599] compiled for 1.13.0, module version = 1.0.0
            [ 22.599] ABI class: X.Org ANSI C Emulation, version 0.4
            [ 22.599] (II) Loading sub module "ramdac"
            [ 22.599] (II) LoadModule: "ramdac"
            [ 22.599] (II) Module "ramdac" already built-in
            [ 22.599] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
            [ 22.599] (==) NVIDIA(0): RGB weight 888
            [ 22.599] (==) NVIDIA(0): Default visual is TrueColor
            [ 22.599] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
            [ 22.599] (**) NVIDIA(0): Option "Stereo" "0"
            [ 22.599] (**) NVIDIA(0): Stereo disabled by request
            [ 22.599] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
            [ 22.599] (**) NVIDIA(0): Enabling 2D acceleration
            [ 24.021] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 24.021] (II) NVIDIA(GPU-0): Vision stereo.
            [ 24.023] (II) NVIDIA(0): NVIDIA GPU GeForce Go 7400 (G72) at PCI:1:0:0 (GPU-0)
            [ 24.023] (--) NVIDIA(0): Memory: 524288 kBytes
            [ 24.023] (--) NVIDIA(0): VideoBIOS: 05.72.22.21.fe
            [ 24.023] (II) NVIDIA(0): Detected PCI Express Link width: 16X
            [ 24.023] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
            [ 24.023] (--) NVIDIA(0): Valid display device(s) on GeForce Go 7400 at PCI:1:0:0
            [ 24.023] (--) NVIDIA(0): CRT-0
            [ 24.023] (--) NVIDIA(0): TV-0
            [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0) (connected)
            [ 24.023] (--) NVIDIA(0): DFP-1
            [ 24.023] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
            [ 24.023] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
            [ 24.023] (--) NVIDIA(0): TV encoder: (null)
            [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
            [ 24.023] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
            [ 24.023] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
            [ 24.023] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
            [ 24.023] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 24.023] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 24.023] (**) NVIDIA(0): been enabled on all display devices.)
            [ 24.024] (II) NVIDIA(0): Validated MetaModes:
            [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
            [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
            [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
            [ 24.024] (II) NVIDIA(0): "nvidia-auto-select+0+0"
            [ 24.024] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
            [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
            [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
            [ 24.024] (WW) NVIDIA(0): Unable to support custom viewPortOut 1500 x 1200 +210 +0
            [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
            [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
            [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
            [ 24.025] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
            [ 24.025] (--) NVIDIA(0): DPI set to (147, 145); computed from "UseEdidDpi" X config
            [ 24.025] (--) NVIDIA(0): option
            [ 24.026] (--) Depth 24 pixmap format is 32 bpp
            [ 24.033] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
            [ 25.431] Loading extension NV-GLX
            [ 25.463] (==) NVIDIA(0): Disabling shared memory pixmaps
            [ 25.463] (==) NVIDIA(0): Backing store disabled
            [ 25.463] (==) NVIDIA(0): Silken mouse enabled
            [ 25.463] (**) NVIDIA(0): DPMS enabled
            [ 25.463] Loading extension NV-CONTROL
            [ 25.464] Loading extension XINERAMA
            [ 25.464] (II) Loading sub module "dri2"
            [ 25.464] (II) LoadModule: "dri2"
            [ 25.464] (II) Module "dri2" already built-in
            [ 25.464] (II) NVIDIA(0): [DRI2] Setup complete
            [ 25.464] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
            [ 25.464] (--) RandR disabled
            [ 25.469] (II) Initializing extension GLX
            [ 25.615] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
            [ 25.618] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
            [ 25.618] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
            [ 25.618] (II) LoadModule: "evdev"
            [ 25.618] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
            [ 25.619] (II) Module evdev: vendor="X.Org Foundation"
            [ 25.619] compiled for 1.13.0, module version = 2.7.3
            [ 25.619] Module class: X.Org XInput Driver
            [ 25.619] ABI class: X.Org XInput driver, version 18.0
            [ 25.619] (II) Using input driver 'evdev' for 'Video Bus'
            [ 25.619] (**) Video Bus: always reports core events
            [ 25.619] (**) evdev: Video Bus: Device: "/dev/input/event4"
            [ 25.619] (--) evdev: Video Bus: Vendor 0 Product 0x6
            [ 25.619] (--) evdev: Video Bus: Found keys
            [ 25.619] (II) evdev: Video Bus: Configuring as keyboard
            [ 25.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input4/event4"
            [ 25.619] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
            [ 25.619] (**) Option "xkb_rules" "evdev"
            [ 25.619] (**) Option "xkb_model" "pc105"
            [ 25.619] (**) Option "xkb_layout" "us"
            [ 25.619] (II) config/udev: Adding input device Power Button (/dev/input/event1)
            [ 25.619] (**) Power Button: Applying InputClass "evdev keyboard catchall"
            [ 25.619] (II) Using input driver 'evdev' for 'Power Button'
            [ 25.619] (**) Power Button: always reports core events
            [ 25.619] (**) evdev: Power Button: Device: "/dev/input/event1"
            [ 25.619] (--) evdev: Power Button: Vendor 0 Product 0x1
            [ 25.620] (--) evdev: Power Button: Found keys
            [ 25.620] (II) evdev: Power Button: Configuring as keyboard
            [ 25.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
            [ 25.620] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
            [ 25.620] (**) Option "xkb_rules" "evdev"
            [ 25.620] (**) Option "xkb_model" "pc105"
            [ 25.620] (**) Option "xkb_layout" "us"
            [ 25.620] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
            [ 25.620] (II) No input driver specified, ignoring this device.
            [ 25.620] (II) This device may have been added with another device file.
            [ 25.620] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
            [ 25.620] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
            [ 25.620] (II) Using input driver 'evdev' for 'Sleep Button'
            [ 25.620] (**) Sleep Button: always reports core events
            [ 25.620] (**) evdev: Sleep Button: Device: "/dev/input/event2"
            [ 25.620] (--) evdev: Sleep Button: Vendor 0 Product 0x3
            [ 25.620] (--) evdev: Sleep Button: Found keys
            [ 25.620] (II) evdev: Sleep Button: Configuring as keyboard
            [ 25.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
            [ 25.620] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
            [ 25.620] (**) Option "xkb_rules" "evdev"
            [ 25.620] (**) Option "xkb_model" "pc105"
            [ 25.621] (**) Option "xkb_layout" "us"
            [ 25.621] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event5)
            [ 25.621] (II) No input driver specified, ignoring this device.
            [ 25.621] (II) This device may have been added with another device file.
            [ 25.621] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
            [ 25.621] (II) No input driver specified, ignoring this device.
            [ 25.621] (II) This device may have been added with another device file.
            [ 25.622] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
            [ 25.622] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
            [ 25.622] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
            [ 25.622] (**) AT Translated Set 2 keyboard: always reports core events
            [ 25.622] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
            [ 25.622] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
            [ 25.622] (--) evdev: AT Translated Set 2 keyboard: Found keys
            [ 25.622] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
            [ 25.622] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
            [ 25.622] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
            [ 25.622] (**) Option "xkb_rules" "evdev"
            [ 25.622] (**) Option "xkb_model" "pc105"
            [ 25.622] (**) Option "xkb_layout" "us"
            [ 25.622] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event8)
            [ 25.622] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
            [ 25.622] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"
            [ 25.622] (II) Using input driver 'evdev' for 'DualPoint Stick'
            [ 25.622] (**) DualPoint Stick: always reports core events
            [ 25.622] (**) evdev: DualPoint Stick: Device: "/dev/input/event8"
            [ 25.622] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
            [ 25.622] (--) evdev: DualPoint Stick: Found 3 mouse buttons
            [ 25.622] (--) evdev: DualPoint Stick: Found relative axes
            [ 25.622] (--) evdev: DualPoint Stick: Found x and y relative axes
            [ 25.622] (II) evdev: DualPoint Stick: Configuring as mouse
            [ 25.622] (**) Option "Emulate3Buttons" "true"
            [ 25.623] (**) Option "EmulateWheel" "true"
            [ 25.623] (**) Option "EmulateWheelButton" "2"
            [ 25.623] (**) Option "YAxisMapping" "4 5"
            [ 25.623] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
            [ 25.623] (**) Option "XAxisMapping" "6 7"
            [ 25.623] (**) evdev: DualPoint Stick: XAxisMapping: buttons 6 and 7
            [ 25.623] (**) evdev: DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
            [ 25.623] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
            [ 25.623] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 10)
            [ 25.623] (II) evdev: DualPoint Stick: initialized for relative axes.
            [ 25.623] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
            [ 25.623] (**) DualPoint Stick: (accel) acceleration profile 0
            [ 25.623] (**) DualPoint Stick: (accel) acceleration factor: 2.000
            [ 25.623] (**) DualPoint Stick: (accel) acceleration threshold: 4
            [ 25.623] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
            [ 25.623] (II) No input driver specified, ignoring this device.
            [ 25.623] (II) This device may have been added with another device file.
            [ 25.623] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event9)
            [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
            [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
            [ 25.623] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
            [ 25.623] (II) LoadModule: "synaptics"
            [ 25.624] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
            [ 25.624] (II) Module synaptics: vendor="X.Org Foundation"
            [ 25.624] compiled for 1.12.99.905, module version = 1.6.2
            [ 25.624] Module class: X.Org XInput Driver
            [ 25.624] ABI class: X.Org XInput driver, version 18.0
            [ 25.624] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
            [ 25.624] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
            [ 25.624] (**) Option "Device" "/dev/input/event9"
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
            [ 25.624] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
            [ 25.624] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
            [ 25.624] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
            [ 25.624] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
            [ 25.624] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 11)
            [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
            [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
            [ 25.624] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156
            [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
            [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
            [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
            [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
            [ 25.625] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
            [ 25.625] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
            [ 25.625] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
            [ 25.627] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
            [ 25.627] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
            [ 25.627] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
            [ 25.627] (**) Dell WMI hotkeys: always reports core events
            [ 25.627] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
            [ 25.627] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
            [ 25.627] (--) evdev: Dell WMI hotkeys: Found keys
            [ 25.627] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
            [ 25.627] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
            [ 25.627] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
            [ 25.627] (**) Option "xkb_rules" "evdev"
            [ 25.627] (**) Option "xkb_model" "pc105"
            [ 25.627] (**) Option "xkb_layout" "us"
            [ 42.930] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 42.930] (II) NVIDIA(GPU-0): Vision stereo.
            [ 42.930] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 42.930] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 42.930] (**) NVIDIA(0): been enabled on all display devices.)
            [ 42.952] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 42.952] (II) NVIDIA(GPU-0): Vision stereo.
            [ 42.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 42.952] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 42.952] (**) NVIDIA(0): been enabled on all display devices.)
            [ 46.910] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 47.123] (II) NVIDIA(GPU-0): Vision stereo.
            [ 47.123] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 47.123] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 47.123] (**) NVIDIA(0): been enabled on all display devices.)
            [ 84.561] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 84.561] (II) NVIDIA(GPU-0): Vision stereo.
            [ 84.561] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 84.561] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 84.561] (**) NVIDIA(0): been enabled on all display devices.)
            [ 141.792] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 141.792] (II) NVIDIA(GPU-0): Vision stereo.
            [ 141.792] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 141.792] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 141.792] (**) NVIDIA(0): been enabled on all display devices.)
            [ 141.815] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 141.816] (II) NVIDIA(GPU-0): Vision stereo.
            [ 141.816] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 141.816] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 141.816] (**) NVIDIA(0): been enabled on all display devices.)
            [ 234.651] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
            [ 234.651] (II) NVIDIA(GPU-0): Vision stereo.
            [ 234.651] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
            [ 234.651] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
            [ 234.651] (**) NVIDIA(0): been enabled on all display devices.)
            ************************************************** ************8
            HERE IS XORG.CONF

            # nvidia-settings: X configuration file generated by nvidia-settings
            # nvidia-settings: version 304.51 (buildd@batsu) Fri Oct 12 12:53:54 UTC 2012


            Section "ServerLayout"
            Identifier "Layout0"
            Screen 0 "Screen0" 0 0
            InputDevice "Keyboard0" "CoreKeyboard"
            InputDevice "Mouse0" "CorePointer"
            Option "Xinerama" "0"
            EndSection

            Section "Files"
            EndSection

            Section "InputDevice"

            # generated from default
            Identifier "Mouse0"
            Driver "mouse"
            Option "Protocol" "auto"
            Option "Device" "/dev/psaux"
            Option "Emulate3Buttons" "no"
            Option "ZAxisMapping" "4 5"
            EndSection

            Section "InputDevice"

            # generated from default
            Identifier "Keyboard0"
            Driver "kbd"
            EndSection

            Section "Monitor"

            # HorizSync source: edid, VertRefresh source: edid
            Identifier "Monitor0"
            VendorName "Unknown"
            ModelName "Seiko/Epson"
            HorizSync 30.0 - 75.0
            VertRefresh 60.0
            Option "DPMS"
            EndSection

            Section "Device"
            Identifier "Device0"
            Driver "nvidia"
            VendorName "NVIDIA Corporation"
            BoardName "GeForce Go 7400"
            EndSection

            Section "Screen"

            # Removed Option "metamodes" "nvidia-auto-select +0+0; nvidia-auto-select @1024x768 +0+0; nvidia-auto-select @1200x800 +0+0; nvidia-auto-select @1920x768 +0+0"
            Identifier "Screen0"
            Device "Device0"
            Monitor "Monitor0"
            DefaultDepth 24
            Option "Stereo" "0"
            Option "metamodes" "nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
            SubSection "Display"
            Depth 24
            EndSubSection
            EndSection
            • Top
            • Bottom

            Comment

              #7
              Well, your xorg.conf doesn't have any resolution selected:

              Code:
              [COLOR=#333333]Option "metamodes" "nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"[/COLOR]
              means to select the native resolution. You need to create modelines for the desired resolution(s). "gtf" will do it for you. Here's an example:

              Code:
              stuart@office:~$ gtf 1024 768 60


  # 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
  Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
              Then set your metamodes to your desired options.

              An alternate way to get your results is to leave xorg.conf alone and set your resolution using xrandr.

              BTW: It's usually better to attach files to your post ("Go Advanced") rather than cut-n-paste them into a post. Much easier to read them off-line.

              Please Read Me
              • Top
              • Bottom

              Comment

                #8
                Originally posted by oshunluvr View Post
                Well, your xorg.conf doesn't have any resolution selected:

                Code:
                [COLOR=#333333]Option "metamodes" "nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"[/COLOR]
                means to select the native resolution. You need to create modelines for the desired resolution(s). "gtf" will do it for you. Here's an example:

                Code:
                stuart@office:~$ gtf 1024 768 60


  # 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
  Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772 795  -HSync +Vsync
                Then set your metamodes to your desired options.

                An alternate way to get your results is to leave xorg.conf alone and set your resolution using xrandr.

                BTW: It's usually better to attach files to your post ("Go Advanced") rather than cut-n-paste them into a post. Much easier to read them off-line.

                Sorry for the long files. I did not know how to attach the files, so I just pasted them in. I Tried your suggestions above and nothing worked for me. I replaced the xorg.conf with the original that has almost nothing in it. Then I ran Xrandr and here are my results.

                fuzzy@fuzzy-Latitude-D820:~$ xrandr
                Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 4096 x 4096
                VGA-0 disconnected (normal left inverted right x axis y axis)
                TV-0 disconnected (normal left inverted right x axis y axis)
                LVDS-0 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
                1920x1200 60.0*+
                DVI-I-0 disconnected (normal left inverted right x axis y axis)
                fuzzy@fuzzy-Latitude-D820:~$

                All 12.10 sees is the 1900x1200. I have spent two days screwing with this and still no resolve. so Kubuntu 12.10 is going in the trash later today and I am going to load another Distro that I know works on this computer. Eversince I changed this computer over to Ubuntu products, I have had setup issues of one sort ot another, and I am throwing in the towel on Ubuntu because the setups suck. It works ok most of the time, but going through setup is worst that Windows XP was when it first came out.

                Thanks for your help.

                Robert Tyler
                • Top
                • Bottom

                Comment

                Previous template Next
                Working...
                X