Using Linux v12 using KDE 4 Desktop. (This system works perfectly in WinXP Pro).
Trendnet 200Mbps Powerline Utility (Using home electrical wiring system)
Room 1 Computer (WinXP Pro) – Device 1
![Click image for larger version
Name: #1.jpg
Views: 1
Size: 24.8 KB
ID: 647878](filedata/fetch?id=647878&d=1638320313&type=thumb)
Room 2 Computer (Linux v12 using KDE Desktop) – Device 2
Connected through the Powerline adapter
![Click image for larger version
Name: #2.jpg
Views: 1
Size: 19.2 KB
ID: 647879](filedata/fetch?id=647879&d=1638320638&type=thumb)
Connection Name: Wired connection 1
Click the Edit button.
Click “Connect Automatically”
Method: Automatic (DHCP)
Ethernet Button: Restrict To Interface - Any
Cloned MAC Address: 00:14
1:7B:10:88
Click Autonegotiate
Click OK
Shows: Wired connection 1 – When activated – State: Connected
bumpy@bumpyputer:~$ sudo ip addr
[sudo] password for bumpy:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 80 qdisc pfifo_fast state UP qlen 1000
link/ether 00:14:d1:7b:10:88 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:48:54:6e:f4:e6 brd ff:ff:ff:ff:ff:ff
bumpy@bumpyputer:~$
Am at a complete loss & would appreciate any constructive suggestions!
Trendnet 200Mbps Powerline Utility (Using home electrical wiring system)
Room 1 Computer (WinXP Pro) – Device 1
Room 2 Computer (Linux v12 using KDE Desktop) – Device 2
Connected through the Powerline adapter
Connection Name: Wired connection 1
Click the Edit button.
Click “Connect Automatically”
Method: Automatic (DHCP)
Ethernet Button: Restrict To Interface - Any
Cloned MAC Address: 00:14
![Cheesy](https://www.kubuntuforums.net/core/images/smilies/cheesy.gif)
Click Autonegotiate
Click OK
Shows: Wired connection 1 – When activated – State: Connected
bumpy@bumpyputer:~$ sudo ip addr
[sudo] password for bumpy:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 80 qdisc pfifo_fast state UP qlen 1000
link/ether 00:14:d1:7b:10:88 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:48:54:6e:f4:e6 brd ff:ff:ff:ff:ff:ff
bumpy@bumpyputer:~$
Am at a complete loss & would appreciate any constructive suggestions!
Comment