Announcement

**MoonRise** · Feb 03, 2010, 05:49 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

2010/02/02 18:43:34 :: No DHCPOFFERS received.
2010/02/02 18:43:34 :: No working leases in persistent database - sleeping.
2010/02/02 18:43:44 :: DHCP connection failed
2010/02/02 18:43:44 :: exiting connection thread
2010/02/02 18:43:44 :: Sending connection attempt result dhcp_failed

You didn't ever get an IP. Either DHCP server isn't responding correctly or it is your network card configuration. I've had issues on D810s. I can try testing with 9.10 Live CD, but it won't be until tonight. I'm still going to ask a question that may seem obvious, but must be asked. In WIN7, you do get an IP from your DHCP? Just verify that. Make sure an IP isn't statically assigned to the WIN7 side of the system. Let me know.

**slaskbak** · Feb 03, 2010, 06:00 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Originally posted by MoonRise

You didn't ever get an IP. Either DHCP server isn't responding correctly or it is your network card configuration. I've had issues on D810s. I can try testing with 9.10 Live CD, but it won't be until tonight. I'm still going to ask a question that may seem obvious, but must be asked. In WIN7, you do get an IP from your DHCP? Just verify that. Make sure an IP isn't statically assigned to the WIN7 side of the system. Let me know.

Thanks for helping me!

I do get a real "fresh" IP-adress from the DHCP in Win 7 and I get (another) one from the same DHCP in Kubuntu when I connect to the wired network and when I turn the WPA/WPA2 encryption off in the wireless network. Now the DHCP-server is in our Juniper NetScreen router and I tried to disable it and enable the DHCP-server in the AP instead but with the same result. I've also tried setting a static IP-address and then I get the message "Unable to connect" in matter of seconds.

And it's the same both at work and at home in similar conditions.

**MoonRise** · Feb 03, 2010, 09:47 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

I get the message "Unable to connect" in matter of seconds.

That tells me then that it is something due to the wireless card or setup. I'll see what I can find for you.

**MoonRise** · Feb 03, 2010, 07:23 PM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

From what I've seen, you might need to use NDISWRAPPER. Do you know what card is in the system? Dell has always either used Intel or their own card. The first link below may help. the second link might as well.

http://www.linuxquestions.org/questi...e-d610-683367/

http://www.linuxforums.org/forum/wir...tude-d610.html

I also ran across something I tend to forget about. Have you run "Hardware Drivers" (located under System from the KMenu) to see if it happens to list you wireless card? It may be that the wrong driver is being used.

**slaskbak** · Feb 04, 2010, 05:29 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

I have the Intel Pro Wireless 2200 card and the ipw2200-driver is installed and running.
No need for any proprietary drivers. I have checked but there aren't any for this card.

I have now tried with the the wext, hostap, madwifi, atmel, ndiswrapper, ipw and ralink_legacy drivers, external and ioctl backend and every possible combination possible of them and I am still unable to connect.

And again thank you for your help.

**yamikuronue** · Feb 04, 2010, 10:14 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

I had a similar issue and found it was an issue with Network Manager; I had to use an alternate network manager to connect. I'd get the name of it for you but my computer's FUBAR atm.

**wizard10000** · Feb 04, 2010, 12:34 PM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Originally posted by slaskbak

2010/02/02 18:43:34 :: No DHCPOFFERS received.

You're not authenticating to the access point, slaskbak. Suggest the first thing you try is turning off security on the AP and see if you can connect then.

Had the same problem with an access point with a hidden SSID and wicd - had to script it manually but before I got it fixed I got the same errors.

Assuming the SSID for your AP is *not* hidden then your authentication sequence has an issue.

Do this -

sudo iwlist eth1 scan

assuming eth1 is your WLAN card, of course.

This will tell you what kind of encryption, cipher and authentication suite your access point is currently using. If by some change you *are* using an AP that doesn't broadcast an SSID you have to script the connection as neither wicd nor the plasma applet will do hidden network names.

**MoonRise** · Feb 04, 2010, 06:10 PM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Suggest the first thing you try is turning off security on the AP and see if you can connect then.

I agree with Wiz here. I don't think it is an issue with the card since I now know it is Dell's Intel based card. Their card yes, Intel no. It has to be that it can't handle WPA/WPA2 which is a possibility. After trying no security and you get a connection try WEP.

**yamikuronue** · Feb 04, 2010, 06:59 PM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

WICD is, in fact, what I've been using. I'm not sure what the issue is, but I've never gotten Network Manager to connect to my school's secure network, whereas it works on my home network just fine.

**slaskbak** · Feb 05, 2010, 02:52 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Thank you everybody for trying to help me!

I am using WICD as my default network manager. I have also tried with Kubuntu's stock network manager.
I have tried on both broadcasted and hidden SSID's. No other equipment or OS have any problems connecting to any of my wireless networks.
I work with selling and installing wireless networks and other network equipment so I have total control over the configuration.
I can connect to all wireless networks in Kubuntu when I turn the encryption off.

Here is the result of sudo iwlist eth1 scan:

eth1 Scan completed :
Cell 01 - Address: 02:6F:83:3A:CC:98
ESSID:""
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key

n
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 11 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=84/100 Signal level=-46 dBm
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 16ms ago
Cell 02 - Address: 02:6F:83:3A:CC:99
ESSID:"AlcaGuest"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key

n
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 11 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=89/100 Signal level=-40 dBm
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 16ms ago

As you can see we have two wireless networks. One internal with hidden SSID and one broadcasted guest network with only internet connection. Both with WPA1 TKIP/PSK at the moment, started with WPA2 RSN CCMP though. My problems are exactly the same on both networks and I have an identical setup at home with different SSID names and keys as the only difference where the problems are the same. As a matter of fact, when I'm home I connect to my neighbours unencrypted wireless network with the very original SSID "dlink" instead.

**wizard10000** · Feb 05, 2010, 05:22 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

AFAIK no GUI will currently connect to a hidden SSID although wicd offers the option. There are quite a few bug reports on this - and on my work network with a hidden SSID I had to script wpa_supplicant and run dhclient after I authenticated. Got a little script that does all the dirty work.

I would suggest going the same route. wpa_supplicant isn't hard to run and generating a configuration that'll talk to your network isn't particularly hard. If you have trouble I can post the scripts I use but they're on my netbook and it might be awhile before I can post them.

**wizard10000** · Feb 05, 2010, 05:23 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Also, wicd worked out of the box on my home network (WPA-PSK, TKIP but no hidden SSID).

**slaskbak** · Feb 05, 2010, 07:13 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

Originally posted by wizard10000

If you have trouble I can post the scripts I use but they're on my netbook and it might be awhile before I can post them.

Please do! There's always a possibilty I've done something wrong when I've tried to config wpa_supplicant manually. It's always nice to have something you know work to start from.

**kjjjjshab** · Feb 05, 2010, 09:22 AM

Re: Can't connect to WPA/WPA2 encrypted wireless networks

http://kubuntuforums.net/forums/inde...5872#msg195872

A recap of my saga to get a WPA connection. Note that any Atheros reference wouldn't apply as you have Intel wireless, but perhaps you might find something useful to try.

Announcement

Can't connect to WPA/WPA2 encrypted wireless networks

Can't connect to WPA/WPA2 encrypted wireless networks

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment