Announcement

**flarson** · May 01, 2009, 06:07 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

You have set up a firewall with iptables that includes logging each blocked packet. As long as you do that your logs are pretty much useless. If you run
sudo fdisk -l
does it list the partitions on you passport? If so you know what disk it is (almost certainly /dev/sdb, at the moment) and you know that it works. Then you just have to figure out how to use it.

**pronek** · May 01, 2009, 06:47 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Thank you for your quick interest.
This is what I get after typing 'sudo fdisk -l' in console:

Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe0c5216f

Device Boot Start End Blocks Id System
/dev/sda1 * 1 6992 56163208+ 83 Linux
/dev/sda2 6993 7296 2441880 5 Extended
/dev/sda5 6993 7296 2441848+ 82 Linux swap / Solaris

**flarson** · May 01, 2009, 06:51 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

That is with the passport plugged in? If so it is not detected. What version of Kubuntu are you running and which KDE?

**pronek** · May 01, 2009, 07:02 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Yep the passport is plugged in and works on my friends R60e every time.We've both installed kubuntu Hardy 8.04.2 with KDE.It is also worth mentioning that other disks works fine on my laptop.

**pronek** · May 01, 2009, 07:06 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Forgot to mention KDE version is 3.5.10.

**flarson** · May 01, 2009, 07:11 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

OK. Run
sudo lsusb
That should show you the device even though no software seems to be reacting to it yet. I am trying to remember the names of the software that handled this under 3.5, There should be something that pops up and says "Found new disk, what do you want to do", and udev ought to be prompting that.

**pronek** · May 01, 2009, 07:14 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

This is what comes up after I've uninstalled iptables and typed again 'dmesg':

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 (Ubuntu 2.6.24-23.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff60000 (usable)
[ 0.000000] BIOS-e820: 000000007ff60000 - 000000007ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff77000 - 000000007ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 524128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524128
[ 0.000000] On node 0 totalpages: 524128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292450 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6D70 checksum 0
[ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 7FF6A6CD, 004C (r1 IBM TP-1R 3200 LTP 0)
[ 0.000000] ACPI: FACP 7FF6A800, 00F4 (r3 IBM TP-1R 3200 IBM 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
[ 0.000000] ACPI: DSDT 7FF6A9E7, C4D5 (r1 IBM TP-1R 3200 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FF78000, 0040
[ 0.000000] ACPI: SSDT 7FF6A9B4, 0033 (r1 IBM TP-1R 3200 MSFT 100000E)
[ 0.000000] ACPI: ECDT 7FF76EBC, 0052 (r1 IBM TP-1R 3200 IBM 1)
[ 0.000000] ACPI: TCPA 7FF76F0E, 0032 (r1 IBM TP-1R 3200 PTL 1)
[ 0.000000] ACPI: BOOT 7FF76FD8, 0028 (r1 IBM TP-1R 3200 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7f800000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520034
[ 0.000000] Kernel command line: root=UUID=a0305c1b-702d-4b68-880d-29eecb7915b0 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (02014000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 598.079 MHz processor.
[ 4.408276] Console: colour VGA+ 80x25
[ 4.408284] console [tty0] enabled
[ 4.408997] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 4.410114] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 4.725833] Memory: 2066304k/2096512k available (2179k kernel code, 29096k reserved, 1008k data, 368k init, 1179008k highmem)
[ 4.725855] virtual kernel memory layout:
[ 4.725859] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 4.725863] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 4.725866] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 4.725870] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 4.725874] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 4.725877] .data : 0xc0320c78 - 0xc041cdc4 (1008 kB)
[ 4.725881] .text : 0xc0100000 - 0xc0320c78 (2179 kB)
[ 4.725891] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 4.725988] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 4.806020] Calibrating delay using timer specific routine.. 1197.53 BogoMIPS (lpj=2395062)
[ 4.806086] Security Framework initialized
[ 4.806105] SELinux: Disabled at boot.
[ 4.806143] AppArmor: AppArmor initialized
[ 4.806154] Failure registering capabilities with primary security module.
[ 4.806176] Mount-cache hash table entries: 512
[ 4.806488] Initializing cgroup subsys ns
[ 4.806500] Initializing cgroup subsys cpuacct
[ 4.806526] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 4.806556] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.806563] CPU: L2 cache: 1024K
[ 4.806571] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00042040 00000180 00000000 00000000 00000000
[ 4.806597] Compat vDSO mapped to ffffe000.
[ 4.806627] Checking 'hlt' instruction... OK.
[ 4.822914] SMP alternatives: switching to UP code
[ 4.827551] Freeing SMP alternatives: 11k freed
[ 4.827849] Early unpacking initramfs... done
[ 5.901157] ACPI: Core revision 20070126
[ 5.901488] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 5.913904] ACPI: setting ELCR to 0200 (from 0800)
[ 5.928048] CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
[ 5.928061] SMP motherboard not detected.
[ 5.928067] Local APIC not detected. Using dummy APIC emulation.
[ 5.928163] Brought up 1 CPUs
[ 5.928201] CPU0 attaching sched-domain:
[ 5.928208] domain 0: span 01
[ 5.928213] groups: 01
[ 5.928596] net_namespace: 64 bytes
[ 5.928612] Booting paravirtualized kernel on bare hardware
[ 5.930224] Time: 12:30:15 Date: 05/01/09
[ 5.930279] NET: Registered protocol family 16
[ 5.930769] EISA bus registered
[ 5.930789] ACPI: bus type pci registered
[ 5.931274] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 5.931280] PCI: Using configuration type 1
[ 5.931297] Setting up standard PCI resources
[ 5.941309] ACPI: EC: EC description table is found, configuring boot EC
[ 5.956988] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 5.964992] ACPI: Interpreter enabled
[ 5.965000] ACPI: (supports S0 S3 S4 S5)
[ 5.965037] ACPI: Using PIC for interrupt routing
[ 5.983819] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 5.983827] ACPI: EC: driver started in poll mode
[ 5.984221] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 5.984815] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 5.984824] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 5.985636] PCI: Transparent bridge - 0000:00:1e.0
[ 5.985851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.986017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 5.986090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 5.996677] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.997236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.997788] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.998402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.998910] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 5.999427] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 5.999934] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 6.000486] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 6.000960] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 6.001253] ACPI: Power Resource [PUBS] (on)
[ 6.001371] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 6.001452] pnp: PnP ACPI init
[ 6.001474] ACPI: bus type pnp registered
[ 6.004638] pnpacpi: exceeded the max number of mem resources: 12
[ 6.011590] pnp: PnP ACPI: found 12 devices
[ 6.011597] ACPI: ACPI bus type pnp unregistered
[ 6.011605] PnPBIOS: Disabled by ACPI PNP
[ 6.012176] PCI: Using ACPI for IRQ routing
[ 6.012184] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 6.037959] NET: Registered protocol family 8
[ 6.037965] NET: Registered protocol family 20
[ 6.038114] AppArmor: AppArmor Filesystem Enabled
[ 6.041940] Time: tsc clocksource has been installed.
[ 6.050032] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 6.050041] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 6.050049] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 6.050058] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 6.050066] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 6.050074] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 6.050083] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 6.050090] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 6.050098] system 00:00: iomem range 0xdc000-0xdffff has been reserved
[ 6.050107] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 6.050115] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 6.050124] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 6.050140] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 6.050149] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 6.050157] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 6.050165] system 00:02: ioport range 0x1600-0x162f has been reserved
[ 6.050173] system 00:02: ioport range 0x1632-0x167f has been reserved
[ 6.050181] system 00:02: ioport range 0x1630-0x1631 has been reserved
[ 6.081247] PCI: Bridge: 0000:00:01.0
[ 6.081254] IO window: 3000-3fff
[ 6.081261] MEM window: c0100000-c01fffff
[ 6.081268] PREFETCH window: e0000000-e7ffffff
[ 6.081297] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 6.081303] IO window: 00004000-000040ff
[ 6.081310] IO window: 00004400-000044ff
[ 6.081318] PREFETCH window: e8000000-ebffffff
[ 6.081326] MEM window: c4000000-c7ffffff
[ 6.081334] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 6.081339] IO window: 00004800-000048ff
[ 6.081347] IO window: 00004c00-00004cff
[ 6.081354] PREFETCH window: ec000000-efffffff
[ 6.081362] MEM window: c8000000-cbffffff
[ 6.081369] PCI: Bridge: 0000:00:1e.0
[ 6.081376] IO window: 4000-8fff
[ 6.081384] MEM window: c0200000-cfffffff
[ 6.081392] PREFETCH window: e8000000-efffffff
[ 6.081416] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 6.082429] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 6.082437] PCI: setting IRQ 11 as level-triggered
[ 6.082444] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 6.083399] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 6.083406] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 6.083439] NET: Registered protocol family 2
[ 6.122115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.122838] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 6.124876] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 6.126073] TCP: Hash tables configured (established 131072 bind 65536)
[ 6.126081] TCP reno registered
[ 6.138339] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 7.156563] it is
[ 8.244789] Freeing initrd memory: 7738k freed
[ 8.245144] Simple Boot Flag at 0x35 set to 0x1
[ 8.245974] audit: initializing netlink socket (disabled)
[ 8.246004] audit(1241181016.512:1): initialized
[ 8.246424] highmem bounce pool size: 64 pages
[ 8.251968] VFS: Disk quotas dquot_6.5.1
[ 8.252183] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.252533] io scheduler noop registered
[ 8.252540] io scheduler anticipatory registered
[ 8.252546] io scheduler deadline registered
[ 8.252586] io scheduler cfq registered (default)
[ 8.252695] Boot video device is 0000:01:00.0
[ 8.253385] isapnp: Scanning for PnP cards...
[ 8.606913] isapnp: No Plug & Play device found
[ 8.690803] Real Time Clock Driver v1.12ac
[ 8.691038] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 8.691215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 8.692789] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 8.693224] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 8.693245] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 8.694919] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 8.695103] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 8.695358] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 8.705602] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.705613] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.717698] mice: PS/2 mouse device common for all mice
[ 8.717977] EISA: Probing bus 0 at eisa.0
[ 8.717990] Cannot allocate resource for EISA slot 1
[ 8.717998] Cannot allocate resource for EISA slot 2
[ 8.718004] Cannot allocate resource for EISA slot 3
[ 8.718010] Cannot allocate resource for EISA slot 4
[ 8.718017] Cannot allocate resource for EISA slot 5
[ 8.718023] Cannot allocate resource for EISA slot 6
[ 8.718029] Cannot allocate resource for EISA slot 7
[ 8.718035] Cannot allocate resource for EISA slot 8
[ 8.718040] EISA: Detected 0 cards.
[ 8.718047] cpuidle: using governor ladder
[ 8.718052] cpuidle: using governor menu
[ 8.718273] NET: Registered protocol family 1
[ 8.718341] Using IPI No-Shortcut mode
[ 8.718401] registered taskstats version 1
[ 8.718684] Magic number: 9:815:530
[ 8.718871] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.718877] EDD information not available.
[ 8.719266] Freeing unused kernel memory: 368k freed
[ 8.719333] Write protecting the kernel read-only data: 806k
[ 8.753539] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 10.285993] fuse init (API version 7.9)
[ 10.346006] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 10.346021] ACPI: Processor [CPU] (supports 8 throttling states)
[ 10.352946] ACPI: Thermal Zone [THM0] (22 C)
[ 11.257305] usbcore: registered new interface driver usbfs
[ 11.257365] usbcore: registered new interface driver hub
[ 11.287520] usbcore: registered new device driver usb
[ 11.320850] USB Universal Host Controller Interface driver v3.0
[ 11.320972] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 11.320996] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.321006] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.321597] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.321637] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 11.321992] usb usb1: configuration #1 chosen from 1 choice
[ 11.322055] hub 1-0:1.0: USB hub found
[ 11.322070] hub 1-0:1.0: 2 ports detected
[ 11.426396] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 11.426407] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 11.426430] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.426439] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.426501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.426538] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 11.426854] usb usb2: configuration #1 chosen from 1 choice
[ 11.426916] hub 2-0:1.0: USB hub found
[ 11.426930] hub 2-0:1.0: 2 ports detected
[ 11.530400] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 11.530411] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 11.530434] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.530444] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.530507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.530544] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 11.530844] usb usb3: configuration #1 chosen from 1 choice
[ 11.530907] hub 3-0:1.0: USB hub found
[ 11.530921] hub 3-0:1.0: 2 ports detected
[ 11.769122] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 11.912490] usb 2-1: device descriptor read/all, error -71
[ 12.154613] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 12.154624] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 12.154653] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.154663] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.154742] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 12.158667] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.158678] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 12.158695] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 12.205086] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.205403] usb usb4: configuration #1 chosen from 1 choice
[ 12.205472] hub 4-0:1.0: USB hub found
[ 12.205488] hub 4-0:1.0: 6 ports detected
[ 12.605002] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 12.613773] SCSI subsystem initialized
[ 12.638756] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 12.638765] Copyright (c) 1999-2006 Intel Corporation.
[ 12.638870] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 12.866526] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:5d:b8:44
[ 12.943399] usb 4-3: configuration #1 chosen from 1 choice
[ 12.943546] usb 4-3: can't set config #1, error -71
[ 13.124927] libata version 3.00 loaded.
[ 13.346501] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 13.346746] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 13.346763] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 13.346837] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 13.346864] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 13.364401] ata_piix 0000:00:1f.1: version 2.12
[ 13.364435] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 13.364506] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 13.366657] scsi0 : ata_piix
[ 13.368468] scsi1 : ata_piix
[ 13.371062] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 13.371071] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 13.533484] ata1.00: ATA-6: HTS726060M9AT00, MH4OA68A, max UDMA/100
[ 13.533495] ata1.00: 117210240 sectors, multi 16: LBA48
[ 13.549486] ata1.00: configured for UDMA/100
[ 13.869304] ata2.00: ATAPI: DVD-ROM UJDA775, DA03, max UDMA/33
[ 14.041282] ata2.00: configured for UDMA/33
[ 14.041552] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5
[ 14.043216] scsi 1:0:0:0: CD-ROM MAT****A DVD-ROM UJDA775 DA03 PQ: 0 ANSI: 5
[ 14.326926] Driver 'sd' needs updating - please use bus_type methods
[ 14.331192] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 14.331225] sd 0:0:0:0: [sda] Write Protect is off
[ 14.331233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.331278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.331388] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 14.331414] sd 0:0:0:0: [sda] Write Protect is off
[ 14.331421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.331464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.331474] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 14.347181] sda1 sda2 < sda5 >
[ 14.366638] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.386712] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.386765] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 14.387697] sr0: scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda tray
[ 14.387706] Uniform CD-ROM driver Revision: 3.20
[ 14.387815] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 14.841780] Attempting manual resume
[ 14.841789] swsusp: Resume From Partition 8:5
[ 14.841794] PM: Checking swsusp image.
[ 14.841987] PM: Resume from disk failed.
[ 14.922233] kjournald starting. Commit interval 5 seconds
[ 14.922258] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.076620] Clocksource tsc unstable (delta = -229143265 ns)
[ 15.080609] Time: acpi_pm clocksource has been installed.
[ 23.945188] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.226623] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.635361] Linux agpgart interface v0.102
[ 28.713969] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.769441] agpgart: Detected an Intel 855PM Chipset.
[ 28.832857] agpgart: AGP aperture is 256M @ 0xd0000000
[ 28.900711] iTCO_vendor_support: vendor-support=0
[ 28.940709] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 28.941736] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 28.941834] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.001597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.362640] intel_rng: FWH not detected
[ 30.010656] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 31.360562] input: Power Button (FF) as /devices/virtual/input/input3
[ 31.376201] ACPI: Power Button (FF) [PWRF]
[ 31.376420] input: Lid Switch as /devices/virtual/input/input4
[ 31.392347] ACPI: Lid Switch [liD]
[ 31.392551] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 31.408202] ACPI: Sleep Button (CM) [SLPB]
[ 34.624842] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6
[ 34.639625] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 35.581974] ath_hal: module license 'Proprietary' taints kernel.
[ 35.743586] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 36.288919] wlan: 0.9.4
[ 36.535469] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[ 36.535498] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 36.535504] Yenta: Routing CardBus interrupts to PCI
[ 36.535514] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[ 36.767988] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
[ 36.767998] Socket status: 30000006
[ 36.768006] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 36.768014] cs: IO port probe 0x4000-0x8fff: clean.
[ 36.771416] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 36.771620] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 36.835545] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[ 36.835572] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 36.835578] Yenta: Routing CardBus interrupts to PCI
[ 36.835588] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[ 36.884002] ath_pci: 0.9.4
[ 36.981049] ACPI: AC Adapter [AC] (on-line)
[ 37.075868] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
[ 37.075878] Socket status: 30000006
[ 37.075885] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 37.075893] cs: IO port probe 0x4000-0x8fff: clean.
[ 37.079297] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 37.079385] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 37.147667] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 37.407144] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 37.407159] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 37.467293] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 37.876332] ACPI: Battery Slot [BAT0] (battery present)
[ 39.194456] parport_pc 00:0a: reported by Plug and Play ACPI
[ 39.194509] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 39.282964] irda_init()
[ 39.283003] NET: Registered protocol family 23
[ 39.319924] ath_rate_sample: 1.2 (0.9.4)
[ 39.323100] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 39.323121] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 39.323133] wifi0: H/W encryption support: WEP AES
[ 39.323142] wifi0: mac 4.2 phy 3.0 5 GHz radio 1.7 2 GHz radio 2.3
[ 39.323155] wifi0: Use hw queue 0 for WME_AC_BE traffic
[ 39.323161] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 39.323167] wifi0: Use hw queue 0 for WME_AC_VI traffic
[ 39.323172] wifi0: Use hw queue 0 for WME_AC_VO traffic
[ 39.323178] wifi0: Use hw queue 8 for CAB traffic
[ 39.323183] wifi0: Use hw queue 9 for beacons
[ 39.347466] Non-volatile memory driver v1.2
[ 39.368035] nsc-ircc 00:0b: activated
[ 39.368048] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 39.368220] nsc-ircc, chip->init
[ 39.368232] nsc-ircc, Found chip at base=0x02e
[ 39.368260] nsc-ircc, driver loaded (Dag Brattli)
[ 39.393879] wifi0: Atheros 5211: mem=0xc0210000, irq=11
[ 39.395007] IrDA: Registered device irda0
[ 39.395014] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 39.395570] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 39.395611] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 39.410955] thinkpad_acpi: ThinkPad ACPI Extras v0.17
[ 39.410963] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 39.410969] thinkpad_acpi: ThinkPad BIOS 1RETDOWW (3.20 ), EC 1RHT71WW-3.04
[ 39.410976] thinkpad_acpi: IBM ThinkPad T40
[ 39.444165] thinkpad_acpi: another device driver is already handling bay events
[ 39.444174] thinkpad_acpi: disabling subdriver bay
[ 39.446917] input: ThinkPad Extra Buttons as /devices/virtual/input/input8
[ 40.318679] intel8x0_measure_ac97_clock: measured 55358 usecs
[ 40.318689] intel8x0: clocking to 48000
[ 42.670279] cs: IO port probe 0x100-0x3af: clean.
[ 42.671525] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 42.672092] cs: IO port probe 0x820-0x8ff: clean.
[ 42.672589] cs: IO port probe 0xc00-0xcf7: clean.
[ 42.673392] cs: IO port probe 0xa00-0xaff: clean.
[ 42.674364] cs: IO port probe 0x100-0x3af: clean.
[ 42.675602] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 42.676168] cs: IO port probe 0x820-0x8ff: clean.
[ 42.676671] cs: IO port probe 0xc00-0xcf7: clean.
[ 42.677482] cs: IO port probe 0xa00-0xaff: clean.
[ 44.198291] lp0: using parport0 (interrupt-driven).
[ 44.296236] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k
[ 44.853498] EXT3 FS on sda1, internal journal
[ 45.164807] device-mapper: uevent: version 1.0.3
[ 45.164879] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 45.313630] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 45.685220] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 48.359879] ACPI: ACPI Dock Station Driver
[ 48.668885] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 48.668901] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 48.668979] ACPI: Error installing bay notify handler
[ 48.668990] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
[ 18.531997] Marking TSC unstable due to: cpufreq changes.
[ 20.110630] IBM machine detected. Enabling interrupts during APM calls.
[ 20.110637] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 20.110640] apm: overridden by ACPI.
[ 20.852317] [drm] Initialized drm 1.1.0 20060810
[ 20.866130] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 20.866550] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 22.105691] ppdev: user-space parallel port driver
[ 22.573202] audit(1241181065.310:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5709 profile="/usr/sbin/cupsd" namespace="default"
[ 22.983443] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input10
[ 23.254433] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 23.254696] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 23.254869] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 24.666599] [drm] Setting GART location based on new memory map
[ 24.666613] [drm] Loading R200 Microcode
[ 24.666668] [drm] writeback test succeeded in 2 usecs
[ 27.810282] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 28.009923] Bluetooth: Core ver 2.11
[ 28.019656] NET: Registered protocol family 31
[ 28.019662] Bluetooth: HCI device and connection manager initialized
[ 28.019668] Bluetooth: HCI socket layer initialized
[ 28.078961] Bluetooth: L2CAP ver 2.9
[ 28.078967] Bluetooth: L2CAP socket layer initialized
[ 28.180317] Bluetooth: RFCOMM socket layer initialized
[ 28.180624] Bluetooth: RFCOMM TTY layer initialized
[ 28.180627] Bluetooth: RFCOMM ver 1.8
[ 30.099051] NET: Registered protocol family 17
[ 34.564887] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
[ 34.736850] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
[ 34.980974] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=239 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=219
[ 35.028881] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=148 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=128
[ 35.232869] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=239 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=219
[ 35.484833] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=239 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=219
[ 35.684919] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=221 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=201
[ 36.228817] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=211 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=191
[ 36.460178] NET: Registered protocol family 10
[ 36.460842] lo: Disabled Privacy Extensions
[ 97.589163] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
[ 97.601108] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=221 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=201
[ 97.612714] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
[ 98.721445] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
[ 99.005192] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165
[ 99.257117] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165
[ 99.277122] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=211 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=191
[ 74.750968] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=185 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=165
[ 99.868306] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153
[ 99.880484] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
[ 100.092376] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=221 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=201
[ 100.880252] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
[ 101.068063] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153
[ 103.569555] DROPPED IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153
[ 41.446280] eth0: no IPv6 routers present
[ 111.511037] ath0: no IPv6 routers present
[ 217.744241] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=217.146.187.123 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=34223 DF PROTO=TCP SPT=443 DPT=4904 SEQ=3234469321 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[ 220.547249] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=67.195.160.197 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=29515 DF PROTO=TCP SPT=443 DPT=1825 SEQ=2565191623 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[ 220.583020] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=67.195.160.197 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=29624 DF PROTO=TCP SPT=443 DPT=1824 SEQ=4231253105 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[ 220.872575] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=217.146.179.200 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=10287 PROTO=TCP SPT=443 DPT=5787 SEQ=378909208 ACK=299726189 WINDOW=8201 RES=0x00 RST URGP=0
[ 221.033652] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=217.146.187.123 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=21440 DF PROTO=TCP SPT=443 DPT=4911 SEQ=548556857 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[ 223.787473] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=217.146.187.123 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=49267 DF PROTO=TCP SPT=443 DPT=4914 SEQ=3416753731 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[ 236.132795] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=74.125.242.171 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=7427 DF PROTO=TCP SPT=80 DPT=3913 SEQ=295444936 ACK=1158523602 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 237.509541] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=12.130.81.249 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=245 ID=35113 PROTO=TCP SPT=80 DPT=4579 SEQ=1994258572 ACK=1166369908 WINDOW=9300 RES=0x00 RST URGP=0
[ 304.505239] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=87.102.31.61 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=15453 DF PROTO=TCP SPT=80 DPT=4233 SEQ=2015657522 ACK=2911156845 WINDOW=33580 RES=0x00 ACK RST URGP=0
[ 309.720844] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=64.158.223.128 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=9690 DF PROTO=TCP SPT=3488 DPT=80 SEQ=2811068784 ACK=2419927275 WINDOW=59 RES=0x00 ACK FIN URGP=0
[ 311.953807] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=64.158.223.128 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12858 DF PROTO=TCP SPT=3489 DPT=80 SEQ=2816700258 ACK=3610275372 WINDOW=59 RES=0x00 ACK FIN URGP=0
[ 321.762084] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=77.238.174.11 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=48390 DF PROTO=TCP SPT=3079 DPT=80 SEQ=4037943234 ACK=4140805113 WINDOW=62 RES=0x00 ACK FIN URGP=0
[ 322.139415] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=64.158.223.128 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=9691 DF PROTO=TCP SPT=3488 DPT=80 SEQ=2811068784 ACK=2419927275 WINDOW=59 RES=0x00 ACK FIN URGP=0
[ 322.992073] DROPPED IN= OUT=eth0 SRC=192.168.1.4 DST=64.158.223.128 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12859 DF PROTO=TCP SPT=3489 DPT=80 SEQ=2816700258 ACK=3610275372 WINDOW=59 RES=0x00 ACK FIN URGP=0
[ 362.660260] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=63.245.209.92 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=TCP SPT=443 DPT=5249 SEQ=1528773898 ACK=231945780 WINDOW=0 RES=0x00 RST URGP=0
[ 371.065821] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=63.245.209.91 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=TCP SPT=443 DPT=2244 SEQ=1993021729 ACK=644297317 WINDOW=0 RES=0x00 RST URGP=0
[ 437.375700] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=64.34.177.146 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=114 ID=15343 DF PROTO=TCP SPT=80 DPT=4299 SEQ=3247183026 ACK=1932488964 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 437.375782] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=64.34.177.146 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=114 ID=15344 DF PROTO=TCP SPT=80 DPT=4296 SEQ=3471965533 ACK=1777493772 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 437.375840] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=64.34.177.146 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=114 ID=15345 DF PROTO=TCP SPT=80 DPT=4298 SEQ=3299219560 ACK=1778376721 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 437.375896] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=64.34.177.146 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=114 ID=15342 DF PROTO=TCP SPT=80 DPT=4300 SEQ=3609379966 ACK=1937720314 WINDOW=0 RES=0x00 ACK RST URGP=0
[ 477.156163] ABORTED IN=eth0 OUT= MAC=00:0d:60:5d:b8:44:00:1e:2a:0c:2e:0c:08:00 SRC=8.12.226.77 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=246 ID=23601 DF PROTO=TCP SPT=80 DPT=4934 SEQ=3852218203 ACK=575917469 WINDOW=4904 RES=0x00 ACK RST URGP=0
[ 811.332178] usb 4-3: USB disconnect, address 2
[ 812.815580] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 812.948864] usb 4-3: config index 0 descriptor too short (expected 9, got 0)
[ 812.948881] usb 4-3: can't read configurations, error -22
[ 813.063503] usb 4-3: new high speed USB device using ehci_hcd and address 4
[ 813.120647] usb 4-3: device descriptor read/64, error -71
[ 813.422625] usb 4-3: device descriptor read/all, error 0
[ 813.529654] usb 4-3: new high speed USB device using ehci_hcd and address 5
[ 813.689806] usb 4-3: configuration #1 chosen from 1 choice
[ 813.948661] usbcore: registered new interface driver libusual
[ 814.066719] Initializing USB Mass Storage driver...
[ 814.074441] scsi2 : SCSI emulation for USB Mass Storage devices
[ 814.077417] usbcore: registered new interface driver usb-storage
[ 814.077431] USB Mass Storage support registered.
[ 814.078326] usb-storage: device found at 5
[ 814.078335] usb-storage: waiting for device to settle before scanning
[ 816.211030] usb-storage: device scan complete
[ 816.212038] scsi 2:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[ 816.226480] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 816.339443] usb 4-3: reset high speed USB device using ehci_hcd and address 5
[ 816.472389] usb 4-3: can't restore configuration #1 (error=-71)
[ 816.472716] usb 4-3: USB disconnect, address 5
[ 816.473085] sd 2:0:0:0: [sdb] Write Protect is off
[ 816.473093] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 816.473100] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 816.473396] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 816.473402] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 816.473414] sd 2:0:0:0: [sdb] Sense not available.
[ 816.473438] sd 2:0:0:0: [sdb] Write Protect is off
[ 816.473445] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 816.473451] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 816.473526] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 816.473623] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 816.583597] usb 4-3: new high speed USB device using ehci_hcd and address 6
[ 816.695366] usb 4-3: device descriptor read/64, error -71
[ 816.887481] usb 4-3: configuration #1 chosen from 1 choice
[ 816.888020] usb 4-3: can't set config #1, error -71
[ 930.821040] usb 4-3: USB disconnect, address 6
[ 931.409778] usb 4-4: new high speed USB device using ehci_hcd and address 7
[ 931.517815] usb 4-4: device descriptor read/64, error -71
[ 931.700463] usb 4-4: configuration #1 chosen from 1 choice
[ 931.703985] usb 4-4: can't set config #1, error -71

**pronek** · May 01, 2009, 07:17 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Here's the result of the 'sudo lsusb' :

Bus 004 Device 007: ID 1058:0704 Western Digital Technologies, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

**flarson** · May 01, 2009, 07:39 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

It appears that your device is detected but for some reason the kernel seems unable to deal with it. According to lsusb it is the only usb device connected to your computer, and the dmesg seems to indicate that the kernel knows it is a disk and is trying to access it and failing.

With this situation does
sudo fdisk -l
show anything of /dev/sdb or generate new entries in either dmesg or /var/log/syslog?

What kernel version are you running? Does the disk have an NTFS filesystem and does your system have NTFS support?

**pronek** · May 01, 2009, 07:53 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Unfortunately 'sudo fdisk -l' does not seem to change. The kernel is 2.6.24-23-generic and there is a FAT32 system on the disk, which has not been partitioned.

**flarson** · May 01, 2009, 08:04 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Googling "device descriptor read/64, error -71" led me to
https://launchpad.net/ubuntu/+source....15/+bug/54273 which has some interesting info. It seems this problem is probably related to the internal cabling of the usb system and its inability to deal with high-speed devices. They suggest that running
rmmod ehci-hcd
will probably help and is a test for this situation. Then people seem to have had luck switching to USB ports that have less cabling.

**toad** · May 01, 2009, 08:08 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

I remember having problems with a variety of USB devices. I found the bug on launchpad, subscribed to it and to this day I get reports! It _may_ help to remove the ehci module so that USB runs at 1.1 speed. To do so, try:

Code:

sudo rmmod ehci_hcd

Now plug in your whatever and see whether it comes up.

If it doesn't you may as well reactivate the USB2 module:

Code:

sudo modprobe ehci_hcd

**pronek** · May 01, 2009, 08:30 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

Many thanks Guys,you've made my day!

**flarson** · May 01, 2009, 08:42 AM

Re: Despite all the efforts WD Passport not mounting on ibmt40

You're welcome. Does that mean it worked?

Announcement

Despite all the efforts WD Passport not mounting on ibmt40

Despite all the efforts WD Passport not mounting on ibmt40

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment