tarball can't find X libraries

[kortsen]

This is the first time I have tried installing something on this install using good old configure - make - make install. I am trying to install Ktoshiba. I unpacked the tar file and started with this command from the readme

lars@toshiba:~/Desktop/ktoshiba-0.11$ ./configure --prefix=`kde-config --prefix`

and it stopped at this point

checking for X... configure: error: Can't find X libraries. Please check your installation and add the correct paths!

Suggestions?

[kortsen]

Re: tarball can't find X libraries

NOW I remember why I kept giving up on Linux. I Googled my own answer to X libraries and installed xorg-dev. Now it chokes at

checking for Qt... configure: error: Qt (>= Qt 3.2 and < 4.0) (library qt-mt) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
Make sure that you have compiled Qt with thread support!

I installed qt3-dev-tools and libqt3-headers but that didn't help

[Rog131]

Re: tarball can't find X libraries

NOW I remember why I kept giving up on Linux.

Yes, it is sometimes...

From FAQ: Installing from source
http://kubuntuforums.net/forums/inde...opic=3085626.0

SNIP

checking for Qt... configure: error: Qt (>= Qt 3.3 and < 4.0) (library qt-mt) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
Make sure that you have compiled Qt with thread support !

Hmm - libraryqt3 is missing

Using Ubuntu packages
http://packages.ubuntu.com/

There is several libqt3 packages -> libqt3-mt, libqt3-mt-dev
installing libqt3-mt-dev (3:3.3.8really3.3.7-0ubuntu4)
--installs-->libxrandr-dev (2:1.2.0-3ubuntu1)

SNAP

[kortsen]

Re: tarball can't find X libraries

Stuck again. Fought with QT, fought with QT-MT. Now I'm stuck at

checking for dbus/connection.h... no
configure: error: You need D-BUS/Qt3 bindings

[kortsen]

Re: tarball can't find X libraries

FINALLY got as far as make. I needed LIBDBUS-QT-1-DEV

[kortsen]

Re: tarball can't find X libraries

MAKE puked.

Good - your configure finished. Start make now

lars@toshiba:~/Desktop/ktoshiba-0.11$ make
make all-recursive
make[1]: Entering directory `/home/lars/Desktop/ktoshiba-0.11'
Making all in doc
make[2]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/doc'
Making all in .
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/doc'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/doc'
Making all in en
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/doc/en'
/usr/bin/meinproc --check --cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/doc/en'
make[2]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/doc'
Making all in po
make[2]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po'
Making all in es
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/es'
rm -f kcmktoshiba.gmo; /usr/bin/msgfmt -o kcmktoshiba.gmo ./kcmktoshiba.po
test ! -f kcmktoshiba.gmo || touch kcmktoshiba.gmo
rm -f ktoshiba.gmo; /usr/bin/msgfmt -o ktoshiba.gmo ./ktoshiba.po
test ! -f ktoshiba.gmo || touch ktoshiba.gmo
Making all in .
make[4]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/es'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/es'
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/es'
Making all in fr
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/fr'
rm -f kcmktoshiba.gmo; /usr/bin/msgfmt -o kcmktoshiba.gmo ./kcmktoshiba.po
test ! -f kcmktoshiba.gmo || touch kcmktoshiba.gmo
rm -f ktoshiba.gmo; /usr/bin/msgfmt -o ktoshiba.gmo ./ktoshiba.po
test ! -f ktoshiba.gmo || touch ktoshiba.gmo
Making all in .
make[4]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/fr'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/fr'
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/fr'
Making all in hu
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/hu'
rm -f kcmktoshiba.gmo; /usr/bin/msgfmt -o kcmktoshiba.gmo ./kcmktoshiba.po
test ! -f kcmktoshiba.gmo || touch kcmktoshiba.gmo
rm -f ktoshiba.gmo; /usr/bin/msgfmt -o ktoshiba.gmo ./ktoshiba.po
test ! -f ktoshiba.gmo || touch ktoshiba.gmo
Making all in .
make[4]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po/hu'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/hu'
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po/hu'
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/po'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po'
make[2]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/po'
Making all in src
make[2]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/src'
Making all in .
make[3]: Entering directory `/home/lars/Desktop/ktoshiba-0.11/src'
if /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
 -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -I/usr/include/kde 
-I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith 
-Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE 
-O2  -Wformat-security -Wmissing-format-attribute -MT hci.lo -MD -MP -MF 
".deps/hci.Tpo" -c -o hci.lo hci.c; \
    then mv -f ".deps/hci.Tpo" ".deps/hci.Plo"; else rm -f ".deps/hci.Tpo"; exit 1; 
fi
if /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
 -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -I/usr/include/kde 
-I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith 
-Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE 
-O2  -Wformat-security -Wmissing-format-attribute -MT sci.lo -MD -MP -MF 
".deps/sci.Tpo" -c -o sci.lo sci.c; \
    then mv -f ".deps/sci.Tpo" ".deps/sci.Plo"; else rm -f ".deps/sci.Tpo"; exit 1; fi
/usr/share/qt3/bin/moc ./ktoshibasmminterface.h -o ktoshibasmminterface.moc
if /bin/bash ../libtool --silent --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. 
-I. -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -I/usr/include/kde 
-I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
-Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE 
-Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security 
-Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new 
-fno-common -MT ktoshibasmminterface.lo -MD -MP -MF 
".deps/ktoshibasmminterface.Tpo" -c -o ktoshibasmminterface.lo 
ktoshibasmminterface.cpp; \
    then mv -f ".deps/ktoshibasmminterface.Tpo" 
".deps/ktoshibasmminterface.Plo"; else rm -f ".deps/ktoshibasmminterface.Tpo"; 
exit 1; fi
/bin/bash ../libtool --silent --tag=CXX --mode=link g++ -Wno-long-long -Wundef 
-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts 
-Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute 
-Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common  -o 
libktoshibasmminterface.la -rpath /usr/lib -L/usr/share/qt3/lib   hci.lo sci.lo 
ktoshibasmminterface.lo
/usr/share/qt3/bin/moc ./ktoshibaomnibookinterface.h -o 
ktoshibaomnibookinterface.moc
if /bin/bash ../libtool --silent --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. 
-I. -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -I/usr/include/kde 
-I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
-Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE 
-Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security 
-Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new 
-fno-common -MT ktoshibaomnibookinterface.lo -MD -MP -MF 
".deps/ktoshibaomnibookinterface.Tpo" -c -o ktoshibaomnibookinterface.lo 
ktoshibaomnibookinterface.cpp; \
    then mv -f ".deps/ktoshibaomnibookinterface.Tpo" ".deps/ktoshibaomnibookinterface.Plo"; 
else rm -f ".deps/ktoshibaomnibookinterface.Tpo"; exit 1; fi
/bin/bash ../libtool --silent --tag=CXX --mode=link g++ -Wno-long-long -Wundef 
-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts 
-Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute 
-Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common  -o 
libktoshibaomnibookinterface.la -rpath /usr/lib -L/usr/share/qt3/lib  
 ktoshibaomnibookinterface.lo
/usr/share/qt3/bin/moc ./ktoshibaprocinterface.h -o ktoshibaprocinterface.moc
if /bin/bash ../libtool --silent --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. 
-I. -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  -I/usr/include/kde 
-I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
-Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE 
-Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security 
-Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new 
-fno-common -MT ktoshibaprocinterface.lo -MD -MP -MF 
".deps/ktoshibaprocinterface.Tpo" -c -o ktoshibaprocinterface.lo 
ktoshibaprocinterface.cpp; \
    then mv -f ".deps/ktoshibaprocinterface.Tpo" ".deps/ktoshibaprocinterface.Plo"; 
else rm -f ".deps/ktoshibaprocinterface.Tpo"; 
exit 1; fi
/bin/bash ../libtool --silent --tag=CXX --mode=link g++ -Wno-long-long -Wundef 
-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts 
-Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute 
-Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common  -o 
libktoshibaprocinterface.la -rpath /usr/lib -L/usr/share/qt3/lib  
 ktoshibaprocinterface.lo
rm -rf settingswidget.h;
/usr/share/qt3/bin/uic -L /usr/lib/kde3/plugins/designer -nounload 
./settingswidget.ui | /usr/bin/perl -pi -e "s,public QWizard,public KWizard,g; 
s,#include <qwizard.h>,#include <kwizard.h>,g" >> settingswidget.h ;
rm -rf statuswidget.h;
/usr/share/qt3/bin/uic -L /usr/lib/kde3/plugins/designer -nounload ./statuswidget.ui
 | /usr/bin/perl -pi -e "s,public QWizard,public KWizard,g; s,#include <qwizard.h>,
#include <kwizard.h>,g" >> statuswidget.h ;
rm -rf cmdwidget.h;
/usr/share/qt3/bin/uic -L /usr/lib/kde3/plugins/designer -nounload ./cmdwidget.ui | 
/usr/bin/perl -pi -e "s,public QWizard,public KWizard,g; s,#include <qwizard.h>,
#include <kwizard.h>,g" >> cmdwidget.h ;
/usr/share/qt3/bin/moc ./ktoshiba.h -o ktoshiba.moc
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  
 -I/usr/include/kde -I/usr/share/qt3/include -I.  -DQT_THREAD_SUPPORT -D_REENTRANT 
 -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align
 -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -Wformat-security -Wmissing-format-attribute
 -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -MT ktoshiba.o -MD -MP
 -MF ".deps/ktoshiba.Tpo" -c -o ktoshiba.o ktoshiba.cpp; \
    then mv -f ".deps/ktoshiba.Tpo" ".deps/ktoshiba.Po"; else rm -f ".deps/ktoshiba.Tpo"; exit 1; fi
In file included from ktoshiba.cpp:31:
suspend.h:26:24: error: hal/libhal.h: No such file or directory
suspend.h:79: error: ISO C++ forbids declaration of ‘LibHalContext’ with no type
suspend.h:79: error: expected ‘;’ before ‘*’ token
make[3]: *** [ktoshiba.o] Error 1
make[3]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/lars/Desktop/ktoshiba-0.11'
make: *** [all] Error 2
lars@toshiba:~/Desktop/ktoshiba-0.11$

[Rog131]

Re: tarball can't find X libraries

hal/libhal.h: No such file or directory

Ubuntu packages (searching libhal.h)
http://packages.ubuntu.com/

=>

Package Contents Search Results

You have searched for libhal.h in gutsy, architecture i386.
Found 1 matching files/directories, displaying files/directories 1 to 1.

FILE PACKAGE

usr/include/hal/libhal.h libdevel/libhal-dev

=>

Do you have:

Package: libhal-dev (0.5.9.1-6ubuntu5)
Hardware Abstraction Layer - development files

HAL provides an abstract view on hardware.

This abstraction layer is simply an interface that makes
it possible to add support for new devices and new ways of
connecting devices to the computer, without modifying every
application that uses the device. It maintains a list of devices
that currently exist, and can provide information about those
upon request.

This package contains files that are needed to build applications.

Note
If you are trying to compile KToshiba
http://ktoshiba.sourceforge.net/
and
http://www.kde-apps.org/content/show...?content=18621

Q: I couldn't find the .deb package on ktoshiba's website. Where is it?

A:
Re: Re: Re: Debian p
by Coproscefalo on: 05/30/2007, 21:52

Azael Azael Avalos

Please go to the SF.net download page to get a newer "alienized version" of KToshiba

https://sourceforge.net/project/show...ease_id=512137

Saludos
Azael

[kortsen]

Re: tarball can't find X libraries

Thank you Rog131 for the link to the DEB package. I originally went to the download page at http://ktoshiba.sourceforge.net/dload.html and all I found for 'packages' was a broken link to an OpenSUSE version.