[ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf78dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf78e000-0xbf7cffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ecfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7ed000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8a04bfc00000 s119704 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1546027 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-19-generic root=UUID=93a2f375-c98b-40ea-b384-1a9892245a06 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6046508K/6282360K available (9308K kernel code, 2478K rwdata, 4016K rodata, 2328K init, 2384K bss, 235852K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37785 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2926.017 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.03 BogoMIPS (lpj=11704068) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.009324] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.009355] Security Framework initialized [ 0.009357] Yama: becoming mindful. [ 0.009380] AppArmor: AppArmor initialized [ 0.011382] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012466] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012522] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012558] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012803] CPU: Physical Processor ID: 0 [ 0.012804] CPU: Processor Core ID: 0 [ 0.012811] mce: CPU supports 9 MCE banks [ 0.012818] CPU0: Thermal monitoring enabled (TM1) [ 0.012827] process: using mwait in idle threads [ 0.012830] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.012831] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.012958] Freeing SMP alternatives memory: 36K [ 0.014484] smpboot: Max logical packages: 4 [ 0.014888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056000] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz (family: 0x6, model: 0x25, stepping: 0x2) [ 0.056000] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. [ 0.056000] core: CPUID marked event: 'bus cycles' unavailable [ 0.056000] ... version: 3 [ 0.056000] ... bit width: 48 [ 0.056000] ... generic registers: 4 [ 0.056000] ... value mask: 0000ffffffffffff [ 0.056000] ... max period: 000000007fffffff [ 0.056000] ... fixed-purpose events: 3 [ 0.056000] ... event mask: 000000070000000f [ 0.056000] Hierarchical SRCU implementation. [ 0.056000] smp: Bringing up secondary CPUs ... [ 0.056000] x86: Booting SMP configuration: [ 0.056000] ... node #0, CPUs: #1 [ 0.056000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.056000] #2 #3 [ 0.060064] smp: Brought up 1 node, 4 CPUs [ 0.060064] smpboot: Total of 4 processors activated (23408.13 BogoMIPS) [ 0.062229] devtmpfs: initialized [ 0.062229] x86/mm: Memory block size: 128MB [ 0.062229] evm: security.selinux [ 0.062229] evm: security.SMACK64 [ 0.062229] evm: security.SMACK64EXEC [ 0.062229] evm: security.SMACK64TRANSMUTE [ 0.062229] evm: security.SMACK64MMAP [ 0.062229] evm: security.ima [ 0.062229] evm: security.capability [ 0.062229] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes) [ 0.064008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064008] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.064010] pinctrl core: initialized pinctrl subsystem [ 0.064010] RTC time: 23:23:56, date: 12/18/17 [ 0.064010] NET: Registered protocol family 16 [ 0.064010] cpuidle: using governor ladder [ 0.064015] cpuidle: using governor menu [ 0.064015] PCCT header not found. [ 0.064057] ACPI: bus type PCI registered [ 0.064059] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064059] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.064059] PCI: not using MMCONFIG [ 0.064059] PCI: Using configuration type 1 for base access [ 0.065051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.065051] ACPI: Added _OSI(Module Device) [ 0.065051] ACPI: Added _OSI(Processor Device) [ 0.065051] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.065051] ACPI: Added _OSI(Processor Aggregator Device) [ 0.065051] ACPI: Executed 1 blocks of module-level executable AML code [ 0.068002] ACPI: Dynamic OEM Table Load: [ 0.068002] ACPI: SSDT 0xFFFF8A04B7C40000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.068002] ACPI: Interpreter enabled [ 0.068002] ACPI: (supports S0 S3 S4 S5) [ 0.068002] ACPI: Using IOAPIC for interrupt routing [ 0.068002] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.068002] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.068002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.068155] ACPI: GPE 0x1B active on init [ 0.068171] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.074255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.074260] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.074395] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.074461] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.074462] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.074463] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.074465] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.074691] PCI host bridge to bus 0000:00 [ 0.074694] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.074695] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.074696] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.074697] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.074698] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.074699] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.074700] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.074707] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.074725] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.074793] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400 [ 0.074822] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.074908] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.074927] pci 0000:00:1a.0: reg 0x10: [mem 0xf9ffc000-0xf9ffc3ff] [ 0.074995] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.075065] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.075082] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.075140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.075208] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.075260] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.075331] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.075383] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.075453] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.075509] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.075580] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.075632] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.075701] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.075754] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.075826] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.075879] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.075954] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.075972] pci 0000:00:1d.0: reg 0x10: [mem 0xf9ff6000-0xf9ff63ff] [ 0.076046] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.076115] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.076214] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100 [ 0.076367] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f [ 0.076380] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07] [ 0.076385] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883] [ 0.076391] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807] [ 0.076397] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483] [ 0.076402] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc40f] [ 0.076408] pci 0000:00:1f.2: reg 0x24: [io 0xc080-0xc08f] [ 0.076492] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.076506] pci 0000:00:1f.3: reg 0x10: [mem 0xf9ff4000-0xf9ff40ff 64bit] [ 0.076522] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.076595] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185 [ 0.076608] pci 0000:00:1f.5: reg 0x10: [io 0xbc00-0xbc07] [ 0.076614] pci 0000:00:1f.5: reg 0x14: [io 0xb880-0xb883] [ 0.076620] pci 0000:00:1f.5: reg 0x18: [io 0xb800-0xb807] [ 0.076625] pci 0000:00:1f.5: reg 0x1c: [io 0xb480-0xb483] [ 0.076631] pci 0000:00:1f.5: reg 0x20: [io 0xb400-0xb40f] [ 0.076636] pci 0000:00:1f.5: reg 0x24: [io 0xb080-0xb08f] [ 0.076746] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000 [ 0.076759] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.076767] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.076775] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.076780] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f] [ 0.076785] pci 0000:01:00.0: reg 0x30: [mem 0xfbe80000-0xfbefffff pref] [ 0.076856] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300 [ 0.076867] pci 0000:01:00.1: reg 0x10: [mem 0xfbe7c000-0xfbe7ffff] [ 0.076968] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.076970] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.076971] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.076974] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.077005] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.077043] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.077091] pci 0000:04:00.0: [1969:1063] type 00 class 0x020000 [ 0.077121] pci 0000:04:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit] [ 0.077131] pci 0000:04:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.077229] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088026] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.088031] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.088035] pci 0000:00:1c.2: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.088095] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.088132] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.088168] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.088225] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.088232] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.088233] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.088234] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.088235] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.088236] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.088237] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 0.088774] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.088818] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.088859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.088902] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.088945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.088987] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.089031] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.089073] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.089325] SCSI subsystem initialized [ 0.089338] libata version 3.00 loaded. [ 0.089338] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.089338] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.089338] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.089338] vgaarb: loaded [ 0.089338] ACPI: bus type USB registered [ 0.089338] usbcore: registered new interface driver usbfs [ 0.089338] usbcore: registered new interface driver hub [ 0.089338] usbcore: registered new device driver usb [ 0.089338] EDAC MC: Ver: 3.0.0 [ 0.089338] PCI: Using ACPI for IRQ routing [ 0.094589] PCI: Discovered peer bus ff [ 0.094589] PCI: root bus ff: using default resources [ 0.094590] PCI: Probing PCI hardware (bus ff) [ 0.094610] ACPI: \: failed to evaluate _DSM (0x1001) [ 0.094611] PCI host bridge to bus 0000:ff [ 0.094612] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.094613] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.094614] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.094616] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.094620] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000 [ 0.094655] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.094688] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.094719] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.094750] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.094782] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.094820] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.094822] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.094824] PCI: pci_cache_line_size set to 64 bytes [ 0.094862] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.094863] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.094942] NetLabel: Initializing [ 0.094942] NetLabel: domain hash size = 128 [ 0.094943] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.094960] NetLabel: unlabeled traffic allowed by default [ 0.096040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.096044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.097018] clocksource: Switched to clocksource hpet [ 0.107133] VFS: Disk quotas dquot_6.6.0 [ 0.107158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.107266] AppArmor: AppArmor Filesystem Enabled [ 0.107318] pnp: PnP ACPI init [ 0.107413] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.107415] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.107416] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.107417] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.107421] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.107484] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.107810] pnp 00:02: [dma 0 disabled] [ 0.107856] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.107993] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.107995] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.107996] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.107998] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108145] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.108147] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.108148] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.108150] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.108151] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.108152] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.108154] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108238] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.108240] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108321] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.108322] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.108324] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108375] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.108377] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.108541] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.108542] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.108543] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.108545] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.108546] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.108548] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.108655] pnp: PnP ACPI: found 9 devices [ 0.115011] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.115028] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.115030] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.115032] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.115037] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.115039] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.115040] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.115047] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.115052] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.115054] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.115055] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000 [ 0.115061] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.115062] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.115064] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 0.115070] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.115071] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 0.115072] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000 [ 0.115088] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.115092] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.115093] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0400000-0xc05fffff] [ 0.115096] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.115098] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref] [ 0.115100] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0a00000-0xc0bfffff] [ 0.115102] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref] [ 0.115104] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0e00000-0xc0ffffff] [ 0.115106] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc1000000-0xc11fffff 64bit pref] [ 0.115108] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc1200000-0xc13fffff] [ 0.115110] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc1400000-0xc15fffff 64bit pref] [ 0.115112] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.115113] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.115115] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff] [ 0.115116] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.115118] pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff] [ 0.115122] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.115123] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.115126] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff] [ 0.115127] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.115130] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.115131] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.115135] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.115137] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.115141] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.115142] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.115145] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff] [ 0.115148] pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.115152] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.115153] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.115156] pci 0000:00:1c.2: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.115159] pci 0000:00:1c.2: bridge window [mem 0xc0800000-0xc09fffff 64bit pref] [ 0.115163] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.115164] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.115167] pci 0000:00:1c.3: bridge window [mem 0xc0a00000-0xc0bfffff] [ 0.115170] pci 0000:00:1c.3: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref] [ 0.115173] pci 0000:00:1c.4: PCI bridge to [bus 06] [ 0.115175] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.115178] pci 0000:00:1c.4: bridge window [mem 0xc0e00000-0xc0ffffff] [ 0.115180] pci 0000:00:1c.4: bridge window [mem 0xc1000000-0xc11fffff 64bit pref] [ 0.115184] pci 0000:00:1c.5: PCI bridge to [bus 07] [ 0.115186] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] [ 0.115189] pci 0000:00:1c.5: bridge window [mem 0xc1200000-0xc13fffff] [ 0.115191] pci 0000:00:1c.5: bridge window [mem 0xc1400000-0xc15fffff 64bit pref] [ 0.115195] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.115204] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.115205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.115206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.115207] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.115208] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.115209] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.115210] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.115211] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff] [ 0.115212] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.115213] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.115214] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.115215] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.115216] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.115217] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc05fffff] [ 0.115218] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.115219] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.115220] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.115221] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref] [ 0.115222] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.115223] pci_bus 0000:05: resource 1 [mem 0xc0a00000-0xc0bfffff] [ 0.115224] pci_bus 0000:05: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref] [ 0.115225] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.115226] pci_bus 0000:06: resource 1 [mem 0xc0e00000-0xc0ffffff] [ 0.115227] pci_bus 0000:06: resource 2 [mem 0xc1000000-0xc11fffff 64bit pref] [ 0.115228] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff] [ 0.115229] pci_bus 0000:07: resource 1 [mem 0xc1200000-0xc13fffff] [ 0.115230] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc15fffff 64bit pref] [ 0.115231] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window] [ 0.115232] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window] [ 0.115234] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.115235] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.115236] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.115237] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.115279] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.115280] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.115310] NET: Registered protocol family 2 [ 0.115487] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.115685] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.115984] TCP: Hash tables configured (established 65536 bind 65536) [ 0.116047] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.116100] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.116189] NET: Registered protocol family 1 [ 0.172147] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.172154] pci 0000:04:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.172165] PCI: CLS 32 bytes, default 64 [ 0.172205] Unpacking initramfs... [ 0.879283] Freeing initrd memory: 48328K [ 0.879319] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.879321] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8a03bb780000-ffff8a03bf77ffff] [ 0.879510] Scanning for low memory corruption every 60 seconds [ 0.879855] audit: initializing netlink subsys (disabled) [ 0.879895] audit: type=2000 audit(1513639436.879:1): state=initialized audit_enabled=0 res=1 [ 0.880190] Initialise system trusted keyrings [ 0.880200] Key type blacklist registered [ 0.880232] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.881287] zbud: loaded [ 0.881636] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.881753] fuse init (API version 7.26) [ 0.882825] Key type asymmetric registered [ 0.882826] Asymmetric key parser 'x509' registered [ 0.882855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.882884] io scheduler noop registered [ 0.882884] io scheduler deadline registered [ 0.882907] io scheduler cfq registered (default) [ 0.883171] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.883265] pcieport 0000:00:1c.1: enabling device (0104 -> 0107) [ 0.883432] pcieport 0000:00:1c.3: enabling device (0104 -> 0107) [ 0.883522] pcieport 0000:00:1c.4: enabling device (0104 -> 0107) [ 0.883604] pcieport 0000:00:1c.5: enabling device (0104 -> 0107) [ 0.883736] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.883736] vesafb: scrolling: redraw [ 0.883737] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.883747] vesafb: framebuffer at 0xcf000000, mapped to 0xffff9efc41400000, using 1216k, total 1216k [ 0.883815] Console: switching to colour frame buffer device 80x30 [ 0.883827] fb0: VESA VGA frame buffer device [ 0.883836] intel_idle: MWAIT substates: 0x1120 [ 0.883837] intel_idle: v0.4.1 model 0x25 [ 0.883944] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.884073] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.884083] ACPI: Power Button [PWRB] [ 0.884112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.884136] ACPI: Power Button [PWRF] [ 0.884306] GHES: HEST is not enabled! [ 0.884378] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.904795] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.906224] Linux agpgart interface v0.103 [ 0.907646] loop: module loaded [ 0.907736] ata_piix 0000:00:1f.2: version 2.13 [ 0.907814] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.908550] scsi host0: ata_piix [ 0.908665] scsi host1: ata_piix [ 0.908694] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 [ 0.908697] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 [ 0.908779] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.909369] scsi host2: ata_piix [ 0.909441] scsi host3: ata_piix [ 0.909468] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 [ 0.909470] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 [ 0.909552] libphy: Fixed MDIO Bus: probed [ 0.909553] tun: Universal TUN/TAP device driver, 1.6 [ 0.909585] PPP generic driver version 2.4.2 [ 0.909618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.909621] ehci-pci: EHCI PCI platform driver [ 0.909711] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.909716] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.909726] ehci-pci 0000:00:1a.0: debug port 2 [ 0.913674] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported [ 0.913685] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9ffc000 [ 0.932012] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.932084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.932085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932086] usb usb1: Product: EHCI Host Controller [ 0.932087] usb usb1: Manufacturer: Linux 4.13.0-19-generic ehci_hcd [ 0.932088] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.932225] hub 1-0:1.0: USB hub found [ 0.932230] hub 1-0:1.0: 2 ports detected [ 0.932401] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.932404] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.932413] ehci-pci 0000:00:1d.0: debug port 2 [ 0.936356] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported [ 0.936365] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9ff6000 [ 0.952020] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.952044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952046] usb usb2: Product: EHCI Host Controller [ 0.952047] usb usb2: Manufacturer: Linux 4.13.0-19-generic ehci_hcd [ 0.952048] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.952160] hub 2-0:1.0: USB hub found [ 0.952164] hub 2-0:1.0: 2 ports detected [ 0.952248] ehci-platform: EHCI generic platform driver [ 0.952256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.952258] ohci-pci: OHCI PCI platform driver [ 0.952265] ohci-platform: OHCI generic platform driver [ 0.952269] uhci_hcd: USB Universal Host Controller Interface driver [ 0.952311] i8042: PNP: No PS/2 controller found. [ 0.952311] i8042: Probing ports directly. [ 0.952764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.952772] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.953232] mousedev: PS/2 mouse device common for all mice [ 0.953978] rtc_cmos 00:01: RTC can wake from S4 [ 0.954194] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.954226] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.954240] i2c /dev entries driver [ 0.954322] device-mapper: uevent: version 1.0.3 [ 0.954399] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.954689] ledtrig-cpu: registered to indicate activity on CPUs [ 0.955147] NET: Registered protocol family 10 [ 0.958834] Segment Routing with IPv6 [ 0.958851] NET: Registered protocol family 17 [ 0.958860] Key type dns_resolver registered [ 0.959152] RAS: Correctable Errors collector initialized. [ 0.959186] microcode: sig=0x20652, pf=0x2, revision=0x9 [ 0.959237] microcode: Microcode Update Driver: v2.2. [ 0.959246] sched_clock: Marking stable (959232747, 0)->(1065369764, -106137017) [ 0.959414] registered taskstats version 1 [ 0.959424] Loading compiled-in X.509 certificates [ 0.961650] Loaded X.509 cert 'Build time autogenerated kernel key: 9ecee6cd9b6cfa793df2ac72959524a16ce8d2f1' [ 0.961670] zswap: loaded using pool lzo/zbud [ 0.964432] Key type big_key registered [ 0.964435] Key type trusted registered [ 0.965736] Key type encrypted registered [ 0.965739] AppArmor: AppArmor sha1 policy hashing enabled [ 0.965742] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.965760] evm: HMAC attrs: 0x1 [ 0.965984] Magic number: 13:653:403 [ 0.966127] rtc_cmos 00:01: setting system clock to 2017-12-18 23:23:57 UTC (1513639437) [ 0.966850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.966850] EDD information not available. [ 0.966872] PM: Hibernation image not present or could not be loaded. [ 1.238287] ata4: SATA link down (SStatus 0 SControl 300) [ 1.248893] ata3: SATA link down (SStatus 0 SControl 300) [ 1.260076] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.280057] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.408494] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.408497] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.408889] hub 1-1:1.0: USB hub found [ 1.408989] hub 1-1:1.0: 6 ports detected [ 1.428676] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.428679] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.429173] hub 2-1:1.0: USB hub found [ 1.429387] hub 2-1:1.0: 8 ports detected [ 1.554225] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.554237] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.696024] usb 1-1.1: new low-speed USB device number 3 using ehci-pci [ 1.712073] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.712083] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.732510] ata1.00: ATA-8: ST3500413AS, JC45, max UDMA/133 [ 1.732513] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.737573] ata1.00: configured for UDMA/133 [ 1.737884] scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5 [ 1.738444] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.738636] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.738674] sd 0:0:0:0: [sda] Write Protect is off [ 1.738676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.738756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.783721] sda: sda1 sda2 sda4 < sda5 sda6 > [ 1.784416] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.786874] Freeing unused kernel memory: 2328K [ 1.786875] Write protecting the kernel read-only data: 14336k [ 1.787186] Freeing unused kernel memory: 920K [ 1.787380] Freeing unused kernel memory: 80K [ 1.789471] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.810761] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c31c [ 1.810764] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.810766] usb 1-1.1: Product: USB Keyboard [ 1.810767] usb 1-1.1: Manufacturer: Logitech [ 1.836510] hidraw: raw HID events driver (C) Jiri Kosina [ 1.848573] usbcore: registered new interface driver usbhid [ 1.848575] usbhid: USB HID core driver [ 1.884082] tsc: Refined TSC clocksource calibration: 2925.797 MHz [ 1.884088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2c7460e23, max_idle_ns: 440795230138 ns [ 1.891953] usb 1-1.2: new low-speed USB device number 4 using ehci-pci [ 1.900776] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C31C.0001/input/input5 [ 1.916361] atl1c 0000:04:00.0: version 1.0.1.1-NAPI [ 1.917275] atl1c 0000:04:00.0 eth1: renamed from eth0 [ 1.920628] checking generic (cf000000 130000) vs hw (d0000000 10000000) [ 1.920629] checking generic (cf000000 130000) vs hw (ce000000 2000000) [ 1.920630] fb: switching to nouveaufb from VESA VGA [ 1.920655] Console: switching to colour dummy device 80x25 [ 1.920811] nouveau 0000:01:00.0: NVIDIA GF108 (0c1000a1) [ 1.960237] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1/input0 [ 1.960409] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input6 [ 2.004460] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077 [ 2.004461] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.004462] usb 1-1.2: Product: USB Optical Mouse [ 2.004463] usb 1-1.2: Manufacturer: Logitech [ 2.006598] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0003/input/input7 [ 2.020189] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1/input1 [ 2.020208] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.058067] nouveau 0000:01:00.0: bios: version 70.08.aa.00.09 [ 2.059352] nouveau 0000:01:00.0: fb: 2048 MiB DDR3 [ 2.939968] clocksource: Switched to clocksource tsc [ 3.360376] [TTM] Zone kernel: Available graphics memory: 3049100 kiB [ 3.360378] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.360380] [TTM] Initializing pool allocator [ 3.360387] [TTM] Initializing DMA pool allocator [ 3.360422] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 3.360425] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.360431] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.360434] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.360438] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030 [ 3.360441] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000 [ 3.360444] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011392 00020020 [ 3.360447] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000 [ 3.360450] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 3.360452] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 3.360454] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 3.373617] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.373618] [drm] Driver supports precise vblank timestamp query. [ 3.424135] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 3.505788] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff8a04b7c83000 [ 3.508109] fbcon: nouveaufb (fb0) is primary device [ 3.508178] Console: switching to colour frame buffer device 128x48 [ 3.508209] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.523956] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.939407] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.054150] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.054270] systemd[1]: Detected architecture x86-64. [ 5.057148] systemd[1]: Set hostname to <steve-desktop>. [ 6.129716] random: crng init done [ 6.902858] systemd[1]: Listening on Syslog Socket. [ 6.902941] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.902963] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.903000] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.903011] systemd[1]: Reached target Encrypted Volumes. [ 6.903046] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 6.903139] systemd[1]: Created slice System Slice. [ 7.307577] lp: driver loaded but no devices found [ 7.573481] ppdev: user-space parallel port driver [ 7.774900] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.900163] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 8.101911] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.651653] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 21.735805] systemd-journald[301]: Received request to flush runtime journal from PID 1 [ 21.780696] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.829572] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170531/utaddress-247) [ 21.829578] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.829598] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 21.850497] input: PEAQ WMI hotkeys as /devices/virtual/input/input8 [ 21.909085] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 21.957685] gpio_ich: GPIO from 436 to 511 on gpio_ich [ 21.964646] snd_hda_intel 0000:01:00.1: Disabling MSI [ 21.964656] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 21.978053] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line [ 21.978056] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.978058] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 21.978059] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 21.978060] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0 [ 21.978061] snd_hda_codec_via hdaudioC0D0: inputs: [ 21.978063] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a [ 21.978065] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e [ 21.978066] snd_hda_codec_via hdaudioC0D0: Line=0x1b [ 21.986576] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 21.986983] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 21.987054] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 21.987123] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 21.987560] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 22.205379] audit: type=1400 audit(1513639458.739:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine" pid=745 comm="apparmor_parser" [ 22.205384] audit: type=1400 audit(1513639458.739:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=745 comm="apparmor_parser" [ 22.206209] audit: type=1400 audit(1513639458.740:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=743 comm="apparmor_parser" [ 22.206213] audit: type=1400 audit(1513639458.740:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser" [ 22.206215] audit: type=1400 audit(1513639458.740:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=743 comm="apparmor_parser" [ 22.206217] audit: type=1400 audit(1513639458.740:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser" [ 22.207147] audit: type=1400 audit(1513639458.741:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=742 comm="apparmor_parser" [ 22.207152] audit: type=1400 audit(1513639458.741:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=742 comm="apparmor_parser" [ 22.207188] audit: type=1400 audit(1513639458.741:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine" pid=744 comm="apparmor_parser" [ 22.207191] audit: type=1400 audit(1513639458.741:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=744 comm="apparmor_parser" [ 23.156335] Adding 4170748k swap on /dev/sda6. Priority:-1 extents:1 across:4170748k FS [ 23.208443] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 23.208528] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 23.208600] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 23.208674] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 23.406073] new mount options do not match the existing superblock, will be ignored [ 23.848931] vboxdrv: loading out-of-tree module taints kernel. [ 23.849183] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 23.854891] vboxdrv: Found 4 processor cores [ 23.876127] vboxdrv: TSC mode is Invariant, tentative frequency 2925784626 Hz [ 23.876128] vboxdrv: Successfully loaded version 5.2.0 (interface 0x00290000) [ 24.080368] VBoxNetFlt: Successfully started. [ 24.081475] VBoxNetAdp: Successfully started. [ 24.082958] VBoxPciLinuxInit [ 24.085004] vboxpci: IOMMU not found (not registered) [ 29.574900] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 29.575207] atl1c 0000:04:00.0: atl1c: eth1 NIC Link is Up<100 Mbps Full Duplex> [ 30.513422] Ebtables v2.0 registered [ 31.346352] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 31.412155] virbr0: port 1(virbr0-nic) entered blocking state [ 31.412157] virbr0: port 1(virbr0-nic) entered disabled state [ 31.412199] device virbr0-nic entered promiscuous mode [ 33.052947] virbr0: port 1(virbr0-nic) entered blocking state [ 33.052951] virbr0: port 1(virbr0-nic) entered listening state [ 33.546862] virbr0: port 1(virbr0-nic) entered disabled state [ 33.549873] device virbr0-nic left promiscuous mode [ 33.549895] virbr0: port 1(virbr0-nic) entered disabled state [ 47.600570] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 47.600935] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 121.494921] kauditd_printk_skb: 22 callbacks suppressed [ 121.494923] audit: type=1400 audit(1513639557.899:34): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2016/status" pid=2016 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 121.494945] audit: type=1400 audit(1513639557.899:35): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2016 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 121.494990] audit: type=1400 audit(1513639557.900:36): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2016/status" pid=2016 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 121.817931] audit: type=1400 audit(1513639558.222:37): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/etc/mysql/my.cnf.fallback" pid=2016 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 122.044065] audit: type=1400 audit(1513639558.448:38): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2019/status" pid=2019 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 122.044106] audit: type=1400 audit(1513639558.448:39): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2019 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 122.044185] audit: type=1400 audit(1513639558.449:40): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/2019/status" pid=2019 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [ 173.613591] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 173.613955] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 299.626774] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 299.627139] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 425.639833] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 425.640197] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 463.265592] audit: type=1400 audit(1513639899.673:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-eded4db7-c4ba-40df-bc66-2ae567303260" pid=3499 comm="apparmor_parser" [ 463.265907] audit: type=1400 audit(1513639899.674:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-eded4db7-c4ba-40df-bc66-2ae567303260//qemu_bridge_helper" pid=3499 comm="apparmor_parser" [ 463.481757] virbr0: port 1(vnet0) entered blocking state [ 463.481761] virbr0: port 1(vnet0) entered disabled state [ 463.481825] device vnet0 entered promiscuous mode [ 463.505842] virbr0: port 1(vnet0) entered blocking state [ 463.505845] virbr0: port 1(vnet0) entered listening state [ 463.936646] audit: type=1400 audit(1513639900.344:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-eded4db7-c4ba-40df-bc66-2ae567303260" pid=3582 comm="apparmor_parser" [ 463.936970] audit: type=1400 audit(1513639900.345:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-eded4db7-c4ba-40df-bc66-2ae567303260//qemu_bridge_helper" pid=3582 comm="apparmor_parser" [ 465.529114] virbr0: port 1(vnet0) entered learning state [ 467.544566] virbr0: port 1(vnet0) entered forwarding state [ 467.544568] virbr0: topology change detected, propagating [ 472.554684] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 551.652953] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 551.653318] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 677.666175] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 677.666486] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 722.627423] perf: interrupt took too long (3142 > 3137), lowering kernel.perf_event_max_sample_rate to 63500 [ 803.680163] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 803.680191] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 929.692372] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 929.692777] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1055.705564] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1055.705897] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1181.718725] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1181.719067] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1198.538202] perf: interrupt took too long (4144 > 3927), lowering kernel.perf_event_max_sample_rate to 48250 [ 1307.731868] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1307.732241] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1433.745059] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1433.745425] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1559.758254] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1559.758329] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1612.001041] virbr0: port 1(vnet0) entered disabled state [ 1612.003242] device vnet0 left promiscuous mode [ 1612.003246] virbr0: port 1(vnet0) entered disabled state [ 1612.966490] audit: type=1400 audit(1513641049.235:45): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-eded4db7-c4ba-40df-bc66-2ae567303260" pid=7541 comm="apparmor_parser" [ 1621.201883] audit: type=1400 audit(1513641057.469:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-72363b02-1be0-4074-b19f-73a83382ee48" pid=7570 comm="apparmor_parser" [ 1621.202178] audit: type=1400 audit(1513641057.470:47): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-72363b02-1be0-4074-b19f-73a83382ee48//qemu_bridge_helper" pid=7570 comm="apparmor_parser" [ 1621.294060] virbr0: port 1(vnet0) entered blocking state [ 1621.294064] virbr0: port 1(vnet0) entered disabled state [ 1621.294141] device vnet0 entered promiscuous mode [ 1621.314107] virbr0: port 1(vnet0) entered blocking state [ 1621.314111] virbr0: port 1(vnet0) entered listening state [ 1621.766445] audit: type=1400 audit(1513641058.034:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-72363b02-1be0-4074-b19f-73a83382ee48" pid=7640 comm="apparmor_parser" [ 1621.766825] audit: type=1400 audit(1513641058.034:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-72363b02-1be0-4074-b19f-73a83382ee48//qemu_bridge_helper" pid=7640 comm="apparmor_parser" [ 1623.334112] virbr0: port 1(vnet0) entered learning state [ 1625.350352] virbr0: port 1(vnet0) entered forwarding state [ 1625.350355] virbr0: topology change detected, propagating [ 1685.771365] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1685.771732] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1811.784543] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1811.784906] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1937.797760] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1937.798084] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2063.810920] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2063.811276] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2189.824147] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2189.824265] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2315.837336] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2315.837649] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2441.850549] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2441.850653] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2567.863754] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2567.864077] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2693.876947] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2693.877276] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2819.890207] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2819.890514] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2835.144304] virbr0: port 1(vnet0) entered disabled state [ 2835.147082] device vnet0 left promiscuous mode [ 2835.147088] virbr0: port 1(vnet0) entered disabled state [ 2836.136918] audit: type=1400 audit(1513642272.275:50): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="libvirt-72363b02-1be0-4074-b19f-73a83382ee48" pid=11809 comm="apparmor_parser" [ 2945.903409] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2945.903774] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3014.833163] usb 2-1.2: new high-speed USB device number 3 using ehci-pci [ 3014.944311] usb 2-1.2: New USB device found, idVendor=0480, idProduct=a202 [ 3014.944316] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3014.944319] usb 2-1.2: Product: External USB 3.0 [ 3014.944321] usb 2-1.2: Manufacturer: TOSHIBA [ 3014.944323] usb 2-1.2: SerialNumber: 20170804004853F [ 3015.077977] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 3015.078104] scsi host4: usb-storage 2-1.2:1.0 [ 3015.078232] usbcore: registered new interface driver usb-storage [ 3015.096695] usbcore: registered new interface driver uas [ 3015.339023] [UFW BLOCK] IN=eth1 OUT= MAC= SRC=fe80:0000:0000:0000:c53e:7ed5:1bf5:1bd3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=844165 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 3015.339041] [UFW BLOCK] IN=eth1 OUT= MAC= SRC=fe80:0000:0000:0000:c53e:7ed5:1bf5:1bd3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=208073 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 3015.349337] [UFW BLOCK] IN=eth1 OUT= MAC= SRC=fe80:0000:0000:0000:c53e:7ed5:1bf5:1bd3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=844165 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 3015.349355] [UFW BLOCK] IN=eth1 OUT= MAC= SRC=fe80:0000:0000:0000:c53e:7ed5:1bf5:1bd3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=208073 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 3018.679102] scsi 4:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ: 0 ANSI: 6 [ 3018.679555] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3018.681441] sd 4:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB) [ 3018.682337] sd 4:0:0:0: [sdb] Write Protect is off [ 3018.682342] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3018.683164] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3018.961656] sdb: sdb1 [ 3018.965928] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3071.916610] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3071.916946] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3197.929836] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3197.929916] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3323.943069] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 3323.943406] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:30:54:de:ad:05:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2
steve@steve-desktop:~$ sudo parted -l [sudo] password for steve: Model: ATA ST3500413AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 266GB 266GB primary ntfs 4 266GB 500GB 234GB extended 5 266GB 496GB 229GB logical ext4 6 496GB 500GB 4271MB logical linux-swap(v1) Model: TOSHIBA External USB 3.0 (scsi) Disk /dev/sdb: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 1000GB 1000GB primary ntfs
TARGET SOURCE FSTYPE OPTIONS / /dev/sda5 ext4 rw,relatime,errors=remount-r ├─/sys sysfs sysfs rw,nosuid,nodev,noexec,relat │ ├─/sys/kernel/security securityfs securit rw,nosuid,nodev,noexec,relat │ ├─/sys/fs/cgroup tmpfs tmpfs rw,mode=755 │ │ ├─/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/net_cls,net_prio cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/rdma cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/hugetlb cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/pids cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ ├─/sys/fs/cgroup/memory cgroup cgroup rw,nosuid,nodev,noexec,relat │ │ └─/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,relat │ ├─/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relat │ ├─/sys/kernel/debug debugfs debugfs rw,relatime │ ├─/sys/kernel/config configfs configf rw,relatime │ └─/sys/fs/fuse/connections fusectl fusectl rw,relatime ├─/proc proc proc rw,nosuid,nodev,noexec,relat │ └─/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=24,pgrp=1,tim ├─/dev udev devtmpf rw,nosuid,relatime,size=3023 │ ├─/dev/pts devpts devpts rw,nosuid,noexec,relatime,gi │ ├─/dev/shm tmpfs tmpfs rw,nosuid,nodev │ ├─/dev/hugepages hugetlbfs hugetlb rw,relatime,pagesize=2M │ └─/dev/mqueue mqueue mqueue rw,relatime ├─/run tmpfs tmpfs rw,nosuid,noexec,relatime,si │ ├─/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relat │ ├─/run/cgmanager/fs cgmfs tmpfs rw,relatime,size=100k,mode=7 │ ├─/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,siz │ └─/run/user/121 tmpfs tmpfs rw,nosuid,nodev,relatime,siz ├─/snap/kde-frameworks-5/12 /dev/loop0 squashf ro,nodev,relatime ├─/snap/core/2774 /dev/loop1 squashf ro,nodev,relatime ├─/snap/core/2462 /dev/loop3 squashf ro,nodev,relatime ├─/snap/falkon/23 /dev/loop2 squashf ro,nodev,relatime ├─/snap/falkon/22 /dev/loop4 squashf ro,nodev,relatime ├─/media/steve/6ABAE7AABAE770CD /dev/sda2 fuseblk rw,nosuid,nodev,relatime,use └─/media/steve/Reservado para el sistema /dev/sda1 fuseblk rw,nosuid,nodev,relatime,use
sudo mkdir /mnt/toshiba && sudo mount -t ntfs /dev/sdb1 /mnt/toshiba
FUSER(1)
NAME
fuser - identify processes using files or sockets
SYNOPSIS
fuser [-fuv] [-a|-s] [-4|-6] [-c|-m|-n space] [ -k [-i] [-M] [-w] [-SIGNAL] ] name ...
fuser -l
fuser -V
DESCRIPTION
fuser displays the PIDs of processes using the specified files or file systems. In the default display mode, each file name is followed by a letter denoting the type of access:
c current directory.
e executable being run.
f open file. f is omitted in default display mode.
F open file for writing. F is omitted in default display mode.
r root directory.
m mmap'ed file or shared library.
fuser returns a non-zero return code if none of the specified files is accessed or in case of a fatal error. If at least one access has been found, fuser returns zero.
In order to look up processes using TCP and UDP sockets, the corresponding name space has to be selected with the -n option. By default fuser will look in both IPv6 and IPv4 sockets. To change
the default, behavior, use the -4 and -6 options. The socket(s) can be specified by the local and remote port, and the remote address. All fields are optional, but commas in front of missing
fields must be present:
[lcl_port][,[rmt_host][,[rmt_port]]]
Either symbolic or numeric values can be used for IP addresses and port numbers.
fuser outputs only the PIDs to stdout, everything else is sent to stderr.
OPTIONS
-a, --all
Show all files specified on the command line. By default, only files that are accessed by at least one process are shown.
-c Same as -m option, used for POSIX compatibility.
-f Silently ignored, used for POSIX compatibility. -k, --kill Kill processes accessing the file. Unless changed with -SIGNAL, SIGKILL is sent. An fuser process never kills itself, but may kill other fuser processes. The effective user ID of the
process executing fuser is set to its real user ID before attempting to kill.
-i, --interactive
Ask the user for confirmation before killing a process. This option is silently ignored if -k is not present too.
-l, --list-signals
List all known signal names.
-m NAME, --mount NAME
NAME specifies a file on a mounted file system or a block device that is mounted. All processes accessing files on that file system are listed. If a directory file is specified, it is
automatically changed to NAME/. to use any file system that might be mounted on that directory.
-M, --ismountpoint
Request will be fulfilled only if NAME specifies a mountpoint. This is an invaluable seatbelt which prevents you from killing the machine if NAME happens to not be a filesystem.
-w Kill only processes which have write access. This option is silently ignored if -k is not present too.
-n SPACE, --namespace SPACE
Select a different name space. The name spaces file (file names, the default), udp (local UDP ports), and tcp (local TCP ports) are supported. For ports, either the port number or the
symbolic name can be specified. If there is no ambiguity, the shortcut notation name/space (e.g. 80/tcp) can be used.
-s, --silent
Silent operation. -u and -v are ignored in this mode. -a must not be used with -s.
-SIGNAL
Use the specified signal instead of SIGKILL when killing processes. Signals can be specified either by name (e.g. -HUP)orby number (e.g. -1). This option is silently ignored if the -k
option is not used.
-u, --user
Append the user name of the process owner to each PID.
-v, --verbose
Verbose mode. Processes are shown in a ps-like style. The fields PID, USER and COMMAND are similar to ps. ACCESS shows how the process accesses the file. Verbose mode will also show
when a particular file is being access as a mount point, knfs export or swap file. In this case kernel is shown instead of the PID.
-V, --version
Display version information.
-4, --ipv4
Search only for IPv4 sockets. This option must not be used with the -6 option and only has an effect with the tcp and udp namespaces.
-6, --ipv6
Search only for IPv6 sockets. This option must not be used with the -4 option and only has an effect with the tcp and udp namespaces.
- Reset all options and set the signal back to SIGKILL.
FILES
/proc location of the proc file system
EXAMPLES
fuser -km /home
kills all processes accessing the file system /home in any way.
if fuser -s /dev/ttyS1; then :; else something; fi
invokes something if no other process is using /dev/ttyS1.
fuser telnet/tcp
shows all processes at the (local) TELNET port.
RESTRICTIONS
Processes accessing the same file or file system several times in the same way are only shown once.
If the same object is specified several times on the command line, some of those entries may be ignored.
fuser may only be able to gather partial information unless run with privileges. As a consequence, files opened by processes belonging to other users may not be listed and executables may be
classified as mapped only.
Installing fuser SUID root will avoid problems associated with partial information, but may be undesirable for security and privacy reasons.
udp and tcp name spaces, and UNIX domain sockets can't be searched with kernels older than 1.3.78.
Accesses by the kernel are only shown with the -v option.
The -k option only works on processes. If the user is the kernel, fuser will print an advice, but take no action beyond that.
BUGS
fuser -m /dev/sgX will show (or kill with the -k flag) all processes, even if you don't have that device configured. There may be other devices it does this for too.
fuser cannot report on any processes that it doesn't have permission to look at the file descriptor table for. The most common time this problem occurs is when looking for TCP or UDP sockets
when running fuser as a non-root user. In this case fuser will report no access
The mount -m option will match any file within the save device as the specified file, use the -M option as well if you mean to specify only the mount point.
SEE ALSO
kill(1), killall(1), lsof(8), pkill(1), ps(1), kill(2).
Comment