First I created /etc/udev/rules.d/10.custom.rules. (Alt+f2 then type "kdesu kate /etc/udev/rules.d/10-custom.rules" without ""
Once that was opened I typed;
BUS=="usb", SYSFS{product}=="PalmOne Handheld*", KERNEL=="ttyUSB*", NAME{ignore_remove}=="treo", MODE=="666"
BUS="usb", SYSFS{product}="palmOne Handheld*", KERNEL="ttyUSB[13579]", SYMLINK="pilot.
Save then closed.
Instead of using Kpilot with kontact, I installed Evolution and gnome-pilot. I used Adept Manager to install. I don't remember what installed with each evolution and gnome-pilot so make sure all these are installed after evolution and gnome-pilot are done.
evolution
evolution-common
evolution-data-server
evolution-data-server-common
libcamel1.2-10
libebook1.2-9
libcal1.2-7
libedata-book1.2-2
libedata-cal1.2-6
libedataserver1.2-9
libedataserverui1.2-8
libexchange-storage1.2-3
gnome-pilot
libgnome-pilot2
libpda-pilot-perl
pilot-manager
Again I didn't pay attention to what all was installed after I Evolution and gnome-pilot were done. So make sure all of the above are installed. After those are installed, start up gnome-pilot settings (Kmenu-Settings-Palm OS Devices)
On the PDA tab:Select Add: PDA-Owner: (your name), PDA ID: leave at 1000 for now, Name of Pda: I typed Treo 650, Local folder: default to what is in there, mine is /home/geo/myPDA. Click OK.
On the Devices tab: Select Add; Name: type Cradle or Cable, Type: USB, Timeout 2, Device: /dev/pilot, Speed 115200. Click OK
On the Conduits tab: Select only those items you want to sync and choose synchronize from the pull down menu, then close.
The first time I pushed the sync button on my USB cable I got an error telling me the Treo ID number. I wrote that number down and opened gnome-pilot settings again and put that number where the 1000 was. Closed it and synced again and it worked flawlessly.
I even added some dates and phone numbers just to test the sync. As of now it is still working.
Once that was opened I typed;
BUS=="usb", SYSFS{product}=="PalmOne Handheld*", KERNEL=="ttyUSB*", NAME{ignore_remove}=="treo", MODE=="666"
BUS="usb", SYSFS{product}="palmOne Handheld*", KERNEL="ttyUSB[13579]", SYMLINK="pilot.
Save then closed.
Instead of using Kpilot with kontact, I installed Evolution and gnome-pilot. I used Adept Manager to install. I don't remember what installed with each evolution and gnome-pilot so make sure all these are installed after evolution and gnome-pilot are done.
evolution
evolution-common
evolution-data-server
evolution-data-server-common
libcamel1.2-10
libebook1.2-9
libcal1.2-7
libedata-book1.2-2
libedata-cal1.2-6
libedataserver1.2-9
libedataserverui1.2-8
libexchange-storage1.2-3
gnome-pilot
libgnome-pilot2
libpda-pilot-perl
pilot-manager
Again I didn't pay attention to what all was installed after I Evolution and gnome-pilot were done. So make sure all of the above are installed. After those are installed, start up gnome-pilot settings (Kmenu-Settings-Palm OS Devices)
On the PDA tab:Select Add: PDA-Owner: (your name), PDA ID: leave at 1000 for now, Name of Pda: I typed Treo 650, Local folder: default to what is in there, mine is /home/geo/myPDA. Click OK.
On the Devices tab: Select Add; Name: type Cradle or Cable, Type: USB, Timeout 2, Device: /dev/pilot, Speed 115200. Click OK
On the Conduits tab: Select only those items you want to sync and choose synchronize from the pull down menu, then close.
The first time I pushed the sync button on my USB cable I got an error telling me the Treo ID number. I wrote that number down and opened gnome-pilot settings again and put that number where the 1000 was. Closed it and synced again and it worked flawlessly.
I even added some dates and phone numbers just to test the sync. As of now it is still working.
Comment