Originally posted by vinnywright
View Post
The thermostatically controlled air valve that supplies air to the combustion process is on the front, near the top. Air was drawn in through the valve and down beneath the grate holding up the wood. The fan drew in air, circulated it around the combustion chamber, and blew it out from underneath, into the room.
Here you can see the asbestos rope that was bonded to the door of the combustion chamber and to the door of the ash bin. The ash that came out was usually as white and powdery as talc powder.
I could put four mesquite logs about 6" in diameter by 18" long in the stove at around 11 PM and they would keep the two story house comfortable all night in the middle of January. Upstairs, where the bedrooms were, the morning temp would be 70F, and downstairs in the living room where the stove was the temp would be 65F. The valve would be wide open and the wood was reduced to a layer of red glowing charcoal about 1' wide, 18" long and an inch or two deep. Part of the incoming air was mixed with the gasses coming off of the fire and reburned. A special anti-back puff stove pipe segment was required.
I loved that stove.
Comment