Appimages, Libfuse2

[Taddaeus]

Hi all

how do I get my Appimages to run in 24.04 LTS? I tried to install libfuse2 but apt says that libfuse2t64 was picked and it is already installed in the newest version.
I don`t think there will be a fix from Kubuntu... so what am I supposed to do?
By the way: the new shiny installer does not let you install Kubuntu on a external drive encrypted (maybe not encrypted also or not at all, I didn` try that), what a shame. (It would let you.. but it still crashes during partitioning)

[Schwarzer Kater]

libfuse2t64 and libfuse3-3 are already installed by default in Kubuntu 24.04 LTS.

Some AppImages start out of the box (e.g. the Kdenlive 23.08.5 AppImage), some don't (e.g. the balena Etcher 1.18.11 AppImage).
This is kind of a déjà vu…

What is the output when you start the AppImage(s) in Konsole ?
Make sure that the AppImage is executable before.


You can run e.g. the balena Etcher AppImage without sandboxing with the --no-sandbox flag in Konsole.
But only do this with applications you got from a trustworthy source!

You can try if this method works for the specific AppImage(s) you want to start:
./name_of_the_program.AppImage --no-sandbox

Some AppImages might already work with the --disable-gpu-sandbox flag…

I have (again) made an alias in .bash_aliases for the balena Etcher AppImage (I also want to use it with the KDE Plasma file picker):
alias etcher="Exec=env GTK_USE_PORTAL=1 $HOME/Applications/balenaEtcher-1.18.11-x64.AppImage --no-sandbox"


PS:
If you want to start AppImages from the GUI (for those that work e.g. without the --no-sandbox flag), check that
in Dolphin -> "hamburger menu" -> Configure -> Configure Dolphin… -> General -> Confirmations -> is set at least to "Always ask".

[Taddaeus]

You can run e.g. the balena Etcher AppImage without sandboxing with the --no-sandbox flag in Konsole.

Hi

Thanks for the reply. The output in the terminal is e.g.:

---

kubuntu-admin-24-04@admin-2404-Yoga-Slim-7-ProX-14ARH7:~/Documents/System/Programme/AppImages$ ./Joplin-2.14.20.AppImage
[30327:0428/210440.157945:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found,
but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make
sure that /tmp/.mount_JoplinQXu8FN/chrome-sandbox is owned by root and has mode 4755.
Trace/breakpoint trap (core dumped)
kubuntu-admin-24-04@admin-2404-Yoga-Slim-7-ProX-14ARH7:~/Documents/System/Programme/AppImages$ ./Joplin-2.14.20.AppImage --no-sandbox
Sentry: Initialized with autoUploadCrashDumps: false

(@joplinapp-desktop:30750): LIBDBUSMENU-GLIB-WARNING **: 21:06:19.838: About to Show called on an item
wihtout submenus. We're ignoring it.

(@joplinapp-desktop:30750): LIBDBUSMENU-GLIB-WARNING **: 21:06:19.839: About to Show called on an item
wihtout submenus. We're ignoring it.

---

I added the --no-sandbox argument in the menu editor to the .desktop-files of my shortcuts for the app images - that works easily as a workaround.
Since 24.04 is the next LTS, one can hope that the app vendors will adapt their app images over time. On the other hand, I find it a very poor development on Ubuntu's part to leave some (certainly many) users out in the cold with a bunch of non-functional apps. I have never experienced such a user-unfriendly drop in functionality with macOS or Windows. Perhaps this is part of the ridiculous strategy of gradually driving everyone to Snaps. That would indeed have something Big Tech-like about it.

[claydoh]

It is is an issue with apparmor it seems, not necessarily specific to Ubuntu, and affects all Electron appimages?
Joplin had set a workaround for 23.10, but hadn't done so for 24.04
It has been fairly rare, but appimages sometimes have issues like this that pop up over the years.

https://github.com/electron/electron/issues/41066
https://github.com/laurent22/joplin/issues/10332

I wonder if a newer release (3.0.6) pre-release works correctly?

[luisele]

I have the same problem. I did everything indicated in this thread but I couldn't get it to work. Does anyone have any new ideas? Thank you

[Schwarzer Kater]

Welcome luisele .

That is strange. AppImages should at least work in Kubuntu 24.04 LTS if you start them from the Konsole terminal emulator with the --no-sandbox option…
I have not found one yet that did not - which AppImages don't work for you?

[luisele]

Thanks for the response, Kater Schwarzer. I try to run balena etcher, because the mintstick image recorder doesn't work for me either.

[Schwarzer Kater]

OK, let's presume you put balenaEtcher-1.18.11-x64.AppImage (the currect version) into your Downloads directory.
Then you would have to --> start the Konsole terminal emulator from your --> Application Launcher --> System and enter
cd Downloads/ to get into your Downloads directory (you can type cd Dow and then press the [Tab] key for autocompletion).
First make sure that the AppImage is executable and enter
chmod +x balenaEtcher-1.18.11-x64.AppImage (you can type chmod +x bal and then press the [Tab] key for autocompletion).
The next step would be to enter
./balenaEtcher-1.18.11-x64.AppImage --no-sandbox (you can type ./bal and then press the [Tab] key for autocompletion and add --no-sandbox)
to start the balena Etcher AppImage in Kubuntu 24.04 LTS.

If this works and you wanted to start it directly from your Application Menu (and with the superior KDE file picker instead of the GTK/GNOME one ) in the future, you would e.g. have to open the Kate text editor, copy and paste the following text and save it as balenaEtcher.desktop in the /home/your_user_name/.local/share/applications/ directory:

[Desktop Entry]
Type=Application
Exec=env GTK_USE_PORTAL=1 $HOME/Downloads/balenaEtcher-1.18.11-x64.AppImage --no-sandbox
Icon=application-x-iso9660-appimage
Name=balenaEtcher
Comment=Create USB installation media from bootable ISOs
NoDisplay=false
StartupNotify=true
Terminal=false
Categories=Utility;
X-KDE-SubstituteUID=false
X-KDE-Username=​

Be sure to use the correct path to the AppImage in the "Exec" line - possibly you will have to change the part between "$HOME/" and "/balenaEtcher-1.18.11-x64.AppImage --no-sandbox" depending on where your AppImage is located.
I wrote the example as if the balena Etcher AppImage was in your Downloads directory.

[luisele]

The file is executable, it is that version, it is in Downloads, I run terminal in Downloads, but when I enter the suggested commands the response is "bash: /balenaEtcher-1.18.11-x64.AppImage: No such file or directory" ( This is an automatic translation because I write in Spanish)

[Schwarzer Kater]

You probably simply forgot the "." directly in front of the "/balenaEtcher-1.18.11-x64.AppImage --no-sandbox".
So your computer searched for a file or directory in the wrong place instead of executing the AppImage.

Generally it is very important to enter commands in the command line interface exactly as written - as you can see a simple "." can already make a huge difference for the meaning of a command.

"./" in front of something can mean: "execute this in/from the directory I am currently in".

[luisele]

You're right! I'm not computer savvy but I've been using Linux for almost 20 years and I shouldn't make these mistakes anymore. Thank you for your time and for sharing the knowledge. These are the things that make us stay using Linux for so long.

[shag00]

This repository should fix you up, no entry for noble but can use an older release: https://ppa.launchpadcontent.net/app...stable/ubuntu/