Announcement

Collapse
No announcement yet.

Anyone know about S.M.A.R.T for Samsung SSDs, K(U)buntu?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Anyone know about S.M.A.R.T for Samsung SSDs, K(U)buntu?

    Helping someone with their thread and stumbled upon questions of my own.
    The issue is: Using SMART on a Samsung SSD in Kubuntu (Linux).

    The SSD is pretty typical: Samsung SSD 870 EVO 500GB. I'm in K22.04. It's about 4 years old. Holds just one OS, K22.04.
    Yep, read the Wikipedia article on SMART, which raises more questions than it answers. Each disk vendor doing things their own way, etc.
    Checked at Samsung, too. They have a diagnostic program you can download, but it's for Windows, Mac, and Android.
    Checked at Ask Ubuntu, Stack's, etc., quickly, and so far am not seeing definitive conversations about the issue, especially about interpreting SMART results or output.

    I did run the short and long programs on SMART, using standard commands. Lots of output, but I can post some of it.
    SMART's bottom-line is: "SMART overall-health self-assessment test result: PASSED"
    But I'm wondering about the output. I'll post some it, and see if anyone has thoughts or experience with such.
    I had previously run the short 2-minute test. Now the long test:

    Test good for 85 minutes (long test):
    sudo smartctl -t long /dev/sda
    Then check the results with
    sudo smartctl -a /dev/sda

    Device is: Not in smartctl database [for details use: -P showall]
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled​

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED​
    ...
    I can't (easily) control the columns, but it's easy to sort out from the header line "ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE"

    SMART Attributes Data Structure revision number: 1
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    5 Reallocated_Sector_Ct 0x0033 072 072 010 Pre-fail Always - 156
    9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 25809
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 41
    177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 12
    179 Used_Rsvd_Blk_Cnt_Tot 0x0013 072 072 010 Pre-fail Always - 156
    181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
    182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
    183 Runtime_Bad_Block 0x0013 072 072 010 Pre-fail Always - 156
    187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 28
    190 Airflow_Temperature_Cel 0x0032 075 056 000 Old_age Always - 25
    195 Hardware_ECC_Recovered 0x001a 199 199 000 Old_age Always - 28
    199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
    235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 24
    241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 17139593317
    ...
    Error 28 occurred at disk power-on lifetime: 25392 hours (1058 days + 0 hours)
    When the command that caused the error occurred, the device was active or idle.​
    ...
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed: read failure 90% 25807 519240
    # 2 Short offline Completed: read failure 90% 25807 519240
    # 3 Short offline Completed: read failure 90% 25807 519240

    ​Any ideas/help with any of this? (Yep, backed up my data! ;-) )

    ​
    An intellectual says a simple thing in a hard way. An artist says a hard thing in a simple way. Charles Bukowski
    Tags: None
    • Top
    • Bottom
    #2
    Your "Reallocated_Sector_Ct" is the thing to watch. If that number grows repeatedly or quickly, it's probably dying. 156 isn't that many, but it's not zero. Some believe 1 is too many.

    You could consider wiping it and running a surface check, but honestly, it's probably time to give it a funeral.

    For comparison, my 840 Pro in use since Jan. 2014:
    Code:
    smith@server:/mnt/pool/@Downloads/torrentfiles$ sudo smartctl -a /dev/sda
[sudo] password for smith:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-124-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 PRO Series
Serial Number:    S12RNEACC52824T
LU WWN Device Id: 5 002538 55012d2eb
Firmware Version: DXM05B0Q
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Nov  6 14:14:12 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection:                (53956) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  20) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       72494
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       821
177 Wear_Leveling_Count     0x0013   084   084   000    Pre-fail  Always       -       575
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   068   044   000    Old_age   Always       -       32
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   099   099   000    Old_age   Always       -       15
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       574
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       39836521414

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       273         -
# 2  Short offline       Completed without error       00%       273         -
# 3  Offline             Completed without error       00%       273         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
1        0        0  Not_testing
2        0        0  Not_testing
3        0        0  Not_testing
4        0        0  Not_testing
5        0        0  Not_testing
255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay​

    Please Read Me
    • Top
    • Bottom

    Comment

      #3
      https://www.smartmontools.org/wiki/BadBlockHowto

      You probably haven't had any issues because you haven't used that part of the drive yet. The good news is you can replace it for about $50
      Last edited by oshunluvr; Today, 01:44 PM.

      Please Read Me
      • Top
      • Bottom

      Comment

        #4
        Thanks for posting your output. 2014 ... wow!

        ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
        This is such a crap-shoot. It may never fail, yet it may give me a serious problem today, never know.
        I noticed my reallocated sector count was trying to get some attention.
        Maybe time to check Amazon prices on a current comparable model to the Samsung 870.

        Thankfully, I just got an M.2 (Crucial), so I have a place to put stuff. Kind of wanted two hard drives, SSD + M.2
        Might empty out the SSD and write zeros to it and test it again.

        Thanks, again.
        An intellectual says a simple thing in a hard way. An artist says a hard thing in a simple way. Charles Bukowski
        • Top
        • Bottom

        Comment

          #5
          Originally posted by Qqmike View Post
          Helping someone with their thread and stumbled upon questions of my own.
          The issue is: Using SMART on a Samsung SSD in Kubuntu (Linux).

          The SSD is pretty typical: Samsung SSD 870 EVO 500GB. I'm in K22.04. It's about 4 years old. Holds just one OS, K22.04.
          Yep, read the Wikipedia article on SMART, which raises more questions than it answers. Each disk vendor doing things their own way, etc.
          Checked at Samsung, too. They have a diagnostic program you can download, but it's for Windows, Mac, and Android.
          Checked at Ask Ubuntu, Stack's, etc., quickly, and so far am not seeing definitive conversations about the issue, especially about interpreting SMART results or output.

          I did run the short and long programs on SMART, using standard commands. Lots of output, but I can post some of it.
          SMART's bottom-line is: "SMART overall-health self-assessment test result: PASSED"
          But I'm wondering about the output. I'll post some it, and see if anyone has thoughts or experience with such.
          I had previously run the short 2-minute test. Now the long test:

          Test good for 85 minutes (long test):
          sudo smartctl -t long /dev/sda
          Then check the results with
          sudo smartctl -a /dev/sda

          Device is: Not in smartctl database [for details use: -P showall]
          SMART support is: Available - device has SMART capability.
          SMART support is: Enabled​

          === START OF READ SMART DATA SECTION ===
          SMART overall-health self-assessment test result: PASSED​
          ...
          I can't (easily) control the columns, but it's easy to sort out from the header line "ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE"

          SMART Attributes Data Structure revision number: 1
          Vendor Specific SMART Attributes with Thresholds:
          ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
          5 Reallocated_Sector_Ct 0x0033 072 072 010 Pre-fail Always - 156
          9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 25809
          12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 41
          177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 12
          179 Used_Rsvd_Blk_Cnt_Tot 0x0013 072 072 010 Pre-fail Always - 156
          181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
          182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
          183 Runtime_Bad_Block 0x0013 072 072 010 Pre-fail Always - 156
          187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 28
          190 Airflow_Temperature_Cel 0x0032 075 056 000 Old_age Always - 25
          195 Hardware_ECC_Recovered 0x001a 199 199 000 Old_age Always - 28
          199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
          235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 24
          241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 17139593317
          ...
          Error 28 occurred at disk power-on lifetime: 25392 hours (1058 days + 0 hours)
          When the command that caused the error occurred, the device was active or idle.​
          ...
          SMART Self-test log structure revision number 1
          Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
          # 1 Extended offline Completed: read failure 90% 25807 519240
          # 2 Short offline Completed: read failure 90% 25807 519240
          # 3 Short offline Completed: read failure 90% 25807 519240

          ​Any ideas/help with any of this? (Yep, backed up my data! ;-) )

          ​
          I would not worry about the SSD. It seems healthy to me. The Reallocated_Sector is small in my opinion.

          Install GSmartControl. It will give you a lot of information and is self explained by the creator of the program in the way that you can do a better interpretation of the results.
          • Top
          • Bottom

          Comment

            #6
            Thank you for your advice and for taking time to look at this, Virginio.
            An intellectual says a simple thing in a hard way. An artist says a hard thing in a simple way. Charles Bukowski
            • Top
            • Bottom

            Comment

            Previous template Next
            Working...
            X