So. As I have a lot of ZFS issues, I decided to install a couple of 2-port PCI-e 1x Non-Raid Sata cards.
now according to hw-probe it notices them or finds them. After clicking on things, I get redirected to ahci.c or something. it’s a bunch of code and I don't have the foggiest on what to do. Yeah there is a download raw button, but then what?
https://linux-hardware.org/?probe=1c8831a84d what was uploaded on hw-probe
.
https://linux-hardware.org/?id=pci:1b21-0612-1b21-1060[
The actual 2x found cards.
.
Then the ahci.c redirection github page....https://github.com/torvalds/linux/bl...ers/ata/ahci.c
.
So what do I do, Thanks.
now according to hw-probe it notices them or finds them. After clicking on things, I get redirected to ahci.c or something. it’s a bunch of code and I don't have the foggiest on what to do. Yeah there is a download raw button, but then what?
https://linux-hardware.org/?probe=1c8831a84d what was uploaded on hw-probe
.
https://linux-hardware.org/?id=pci:1b21-0612-1b21-1060[
The actual 2x found cards.
.
Then the ahci.c redirection github page....https://github.com/torvalds/linux/bl...ers/ata/ahci.c
.
So what do I do, Thanks.