If this is your first visit, be sure to
check out the FAQ. You will have to register
before you can post. To start viewing messages,
select the forum that you want to visit from the selection below.
Please do not use the CODE tag when pasting content that contains formatting (colored, bold, underline, italic, etc).
The CODE tag displays all content as plain text, including the formatting tags, making it difficult to read.
I have some old, slow, low-capacity hard drives that I want to get rid of. Should I shred the data and then delete the partitions, or is that really overkill because deleting the partitions is enough by itself?
If you intend to discard them, physical damage is sufficient (who really wants what you had on them anyway, right?). Drill holes through the drive if you have an electric drill. Take a hole punch and a hammer if not.
Windows no longer obstructs my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
If you intend to sell/donate/recycle them, then a full wipe/overwrite is the safer way to go versus just deleting the partition. This just clears the partition table info, and doers not actually remove any data. Recovery software can retrieve this fairly easily.
Deleting partitions does nothing (except to move some data pointers around, or negate them/turn them off).
As these guys said, two options:
1 Physically damage the disks by removing the drive; then maybe a sledge hammer/punch, drill, etc. Caution: Use eye goggle protection! (The platters will come out and off at some point of this process.) Just mess up the platters real good. No one would make any effort to retrieve data from them.
2 Wipe the drives -- write zeros to every 'bit' of the drive. Or random numbers. Or your favorite numbers. Or multiple passes.
See my how-to for using the dd function (for more options than you care to read about): https://www.kubuntuforums.net/showth...The-dd-Command
An intellectual says a simple thing in a hard way. An artist says a hard thing in a simple way. Charles Bukowski
Another way is to expose the platters and then heat them with a Bunsen or propane torch till they are cherry red, which puts their temperature over the Curie point for Iron, which is 770C. That will usually fry the circuit board as well. Or, if you have a wood burning stove that will work. So will a campfire.
"A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
– John F. Kennedy, February 26, 1962.
I keep lots of old drives for backups. Especially 2.5″ ones from dead laptops. USB 3 gives enough power to drive laptop drives, so a SATA to USB adapter makes it convenient. I tend to think that one can't have too many backups, though using old hardware for backups seems questionable.
I keep lots of old drives for backups. Especially 2.5″ ones from dead laptops. USB 3 gives enough power to drive laptop drives, so a SATA to USB adapter makes it convenient. I tend to think that one can't have too many backups, though using old hardware for backups seems questionable.
I did that for awhile, then USB drives got cheaper than the kits to convert drives to USB. And like you said using old hardware is questionable in this case.
Doing that, they may end up on some NYC computer repairman's laptop!
"A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
– John F. Kennedy, February 26, 1962.
I keep lots of old drives for backups. Especially 2.5″ ones from dead laptops. USB 3 gives enough power to drive laptop drives, so a SATA to USB adapter makes it convenient. I tend to think that one can't have too many backups, though using old hardware for backups seems questionable.
I have two 695Gb spinners setting in USB caddies that plug into my USB 3.0 port. They are my "portable" away storage.
"A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
– John F. Kennedy, February 26, 1962.
If you have time/inclination or a curious kid who likes to take things apart you can disassemble them and harvest the magnets for, well, magnets, and the platters are VERY shiny and make nice, umm, shiny things.
VERY strong magnets. Don't get your finger caught between two of them!
Windows no longer obstructs my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
Comment