Announcement

Collapse
No announcement yet.

k3b unable to burn

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    k3b unable to burn

    "Unable to open new session.:
    "Probably a problem with the medium"

    but the medium should be fine... its working under windows

    Code:
    Devices
-----------------------
HL-DT-ST DVDRAM GSA-T20L NC08 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 465818 (953995264 bytes)

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.4 (KDE 4.3.4)
QT Version: 4.5.2
Kernel:   2.6.31-17-generic

Used versions
-----------------------
mkisofs: 1.1.9
cdrecord: 1.1.9

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type  : Removable CD-ROM
Version    : 5
Response Format: 2
Capabilities  : 
Vendor_info  : 'HL-DT-ST'
Identification : 'DVDRAM GSA-T20L '
Revision    : 'NC08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B (DVD+R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) (current)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) 
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags  : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 7281 kB/s 41x CD 5x DVD
FIFO size   : 12582912 = 12288 KB
Speed set to 11080 KB/s
Track 01: data  909 MB    
Total size:   1044 MB (103:30.90) = 465818 sectors
Lout start:   1045 MB (103:32/68) = 465818 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1829286
Starting to write CD/DVD at speed  8.0 in real SAO mode for multi session.
Last chance to quit, starting real write in  2 seconds.
  1 seconds.
  0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 07 1B 9A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 35 2D 03 0E 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 14.500s timeout 200s
/usr/bin/wodim: Cannot open new session.
input buffer ready.
Writing time:  14.571s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -multi -data -tsize=465818s -

mkisofs
-----------------------
465818
I: -input-charset not specified, using utf-8 (detected in locale settings)
 0.22% done, estimate finish Tue Jan 12 15:43:16 2010
 0.32% done, estimate finish Tue Jan 12 15:43:16 2010
 0.43% done, estimate finish Tue Jan 12 15:43:16 2010
 0.54% done, estimate finish Tue Jan 12 15:43:16 2010
 0.65% done, estimate finish Tue Jan 12 15:43:16 2010
 0.75% done, estimate finish Tue Jan 12 15:43:16 2010
 0.86% done, estimate finish Tue Jan 12 15:45:12 2010
 0.97% done, estimate finish Tue Jan 12 15:44:59 2010
 1.07% done, estimate finish Tue Jan 12 15:44:49 2010
 1.18% done, estimate finish Tue Jan 12 15:44:40 2010
 1.29% done, estimate finish Tue Jan 12 15:44:33 2010

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Backup -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-bene/k3ba11690.tmp -rational-rock -hide-list /tmp/kde-bene/k3bs11690.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-bene/k3bc11690.tmp -no-cache-inodes -full-iso9660-filenames -disable-deep-relocation -iso-level 3 -path-list /tmp/kde-bene/k3bL11690.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Backup -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-bene/k3bY11690.tmp -rational-rock -hide-list /tmp/kde-bene/k3be11690.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-bene/k3bl11690.tmp -no-cache-inodes -full-iso9660-filenames -disable-deep-relocation -iso-level 3 -path-list /tmp/kde-bene/k3bB11690.tmp
    Tags: None
    • Top
    • Bottom
    #2
    Re: k3b unable to burn

    This has happened before:

    https://bugs.launchpad.net/ubuntu/+s...3b/+bug/149076

    Make sure your user is a member of the "fuse" group, and if there is a "scanner" group (I'm away from my system) make sure he's in that one too.
    • Top
    • Bottom

    Comment

      #3
      Re: k3b unable to burn

      uhm still the same error... I also tried to use the k3bsetup. I created a new group called burning put myself into it and changed the privileges in k3bsetup... no success
      • Top
      • Bottom

      Comment

        #4
        Re: k3b unable to burn

        Make sure you aren't, maybe, trying to use a DVD-RW disc instead of a CD-RW disc, or a CD-R only disc.
        Windows no longer obstructs my view.
        Using Kubuntu Linux since March 23, 2007.
        "It is a capital mistake to theorize before one has data." - Sherlock Holmes​
        • Top
        • Bottom

        Comment

          #5
          Re: k3b unable to burn

          Originally posted by Snowhog
          Make sure you aren't, maybe, trying to use a DVD-RW disc instead of a CD-RW disc, or a CD-R only disc.
          No the medium settings are allright
          • Top
          • Bottom

          Comment

            #6
            Re: k3b unable to burn

            still not working... : /
            • Top
            • Bottom

            Comment

              #7
              Re: k3b unable to burn

              trying a dvd+rw with cdrecord

              Code:
              bene@bene-laptop:~/TEMP$ cdrecord -v dev=/dev/scd0 backup.iso 
wodim: No write mode specified.                
wodim: Asuming -tao mode.                   
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM                            
scsidev: '/dev/scd0'                            
devname: '/dev/scd0'                            
scsibus: -2 target: -2 lun: -2                       
Linux sg driver version: 3.5.27                       
Wodim version: 1.1.9                            
SCSI buffer size: 64512                           
Device type  : Removable CD-ROM                      
Version    : 5                             
Response Format: 2                             
Capabilities  :                              
Vendor_info  : 'HL-DT-ST'                         
Identification : 'DVDRAM GSA-T20L '                     
Revision    : 'NC08'                           
Device seems to be: Generic mmc2 DVD-R/DVD-RW.               
Current: 0x001A (DVD+RW)                          
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags  : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 8717 kB/s 49x CD 6x DVD
FIFO size   : 12582912 = 12288 KB
Track 01: data 1494 MB
Total size:   1716 MB (170:03.26) = 765245 sectors
Lout start:   1716 MB (170:05/20) = 765245 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1529859
Speed set to 5540 KB/s
Starting to write CD/DVD at speed  4.0 in real unknown mode for single session.
Last chance to quit, starting real write in  0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Errno: 5 (Input/output error), send opc scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 70.458s timeout 60s
wodim: OPC failed.
Writing time: 113.922s
wodim: fifo had 192 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
              • Top
              • Bottom

              Comment

                #8
                Re: k3b unable to burn

                on the groups thing hears mine

                vinny@desktop:~$ groups
                vinny adm dialout cdrom plugdev lpadmin admin sambashare
                vinny@desktop:~$
                and it works fine.......see if your in all those.

                and check the avalabel space on / ......K3b is righting to a /tmp/ file to stage the iso befor burning
                and has to have enuff space in /tmp

                VINNY
                i7 4core HT 8MB L3 2.9GHz
                16GB RAM
                Nvidia GTX 860M 4GB RAM 1152 cuda cores
                • Top
                • Bottom

                Comment

                  #9
                  Re: k3b unable to burn

                  groups
                  bene adm dialout cdrom plugdev fuse lpadmin admin sambashare burning


                  even using cdrecord with sudo precommand has the same result... it may be a hardware/driver problem...

                  :/ need to backup files
                  • Top
                  • Bottom

                  Comment

                    #10
                    Re: k3b unable to burn

                    you dident say how mutch space you have on /

                    what dose

                    Code:
                    df -h
                    say


                    VINNY
                    i7 4core HT 8MB L3 2.9GHz
                    16GB RAM
                    Nvidia GTX 860M 4GB RAM 1152 cuda cores
                    • Top
                    • Bottom

                    Comment

                      #11
                      Re: k3b unable to burn

                      Filesystem Size Used Avail Use% Mounted on
                      /dev/sda6 23G 16G 5.0G 77% /
                      udev 1003M 264K 1003M 1% /dev
                      none 1003M 200K 1003M 1% /dev/shm
                      none 1003M 76K 1003M 1% /var/run
                      none 1003M 0 1003M 0% /var/lock
                      none 1003M 0 1003M 0% /lib/init/rw
                      /dev/sda1 20G 20G 118M 100% /media/disk
                      /dev/sda5 69G 67G 1.8G 98% /media/disk-1


                      (I am trying to burn around 1gb)

                      But I guess OPC is something like pre formatting?
                      • Top
                      • Bottom

                      Comment

                        #12
                        Re: k3b unable to burn

                        Originally posted by biosftw

                        /dev/sda1 20G 20G 118M 100% /media/disk
                        /dev/sda5 69G 67G 1.8G 98% /media/disk-1
                        Neither one of those is a good number -- not sure that it relates to the DVD burning problem. :P
                        • Top
                        • Bottom

                        Comment

                          #13
                          Re: k3b unable to burn

                          This is my windows partition which are usually unmounted

                          • Top
                          • Bottom

                          Comment

                          Previous template Next
                          Working...
                          X