Hi, My friend have a trouble with k3b on kubuntu 9.10.
When he try to use k3b to write an audio cd, It show him this error message:
From konsole he have this output:
Can you help me to help him?
When he try to use k3b to write an audio cd, It show him this error message:
Code:
cdrecords has no perission to open the device
Code:
You may use k3bsetup to solve this problem
Code:
Devices ----------------------- _NEC DVD_RW ND-3540A 1.01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite] [%7] System ----------------------- K3b Version: 1.68.0 KDE Version: 4.3.2 (KDE 4.3.2) QT Version: 4.5.2 Kernel: 2.6.31-16-generic Used versions ----------------------- cdrecord: 1.1.9 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.9 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 0 = CD-DA Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identification : 'DVD_RW ND-3540A ' Revision : '1.01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1343488 = 1312 KB FIFO size : 12582912 = 12288 KB Speed set to 8467 KB/s pregap1: -1 Track 01: audio 7 MB (00:45.09) no preemp swab copy Track 02: audio 39 MB (03:57.01) no preemp swab copy Track 03: audio 41 MB (04:06.76) no preemp swab copy Track 04: audio 61 MB (06:04.46) no preemp swab copy Track 05: audio 44 MB (04:21.96) no preemp swab copy Track 06: audio 48 MB (04:51.26) no preemp swab copy Track 07: audio 46 MB (04:39.30) no preemp swab copy Track 08: audio 46 MB (04:39.09) no preemp swab copy Track 09: audio 42 MB (04:13.05) no preemp swab copy Track 10: audio 42 MB (04:13.42) no preemp swab copy Track 11: audio 22 MB (02:11.26) no preemp swab copy Track 12: audio 39 MB (03:55.18) no preemp swab copy Track 13: audio 42 MB (04:10.08) no preemp swab copy Track 14: audio 46 MB (04:36.66) no preemp swab copy Track 15: audio 54 MB (05:25.98) no preemp swab copy Track 16: audio 37 MB (03:43.77) no preemp swab copy Track 17: audio 37 MB (03:39.98) no preemp swab copy Track 18: audio 33 MB (03:17.76) no preemp swab copy Total size: 735 MB (72:52.14) = 327911 sectors Lout start: 735 MB (72:54/11) = 327911 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 31934 Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Errno: 5 (Input/output error), send opc scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 00 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 211.158s timeout 200s /usr/bin/wodim: OPC failed. Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd: fatal error CDB: 1E 00 00 00 00 00 cmd finished after 0.000s timeout 200s Writing time: 211.183s /usr/bin/wodim: fifo had 191 puts and 0 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao driveropts=burnfree -useinfo -audio /tmp/kde-stiggia/k3b_audio_0_01.inf /tmp/kde-stiggia/k3b_audio_0_02.inf /tmp/kde-stiggia/k3b_audio_0_03.inf /tmp/kde-stiggia/k3b_audio_0_04.inf /tmp/kde-stiggia/k3b_audio_0_05.inf /tmp/kde-stiggia/k3b_audio_0_06.inf /tmp/kde-stiggia/k3b_audio_0_07.inf /tmp/kde-stiggia/k3b_audio_0_08.inf /tmp/kde-stiggia/k3b_audio_0_09.inf /tmp/kde-stiggia/k3b_audio_0_10.inf /tmp/kde-stiggia/k3b_audio_0_11.inf /tmp/kde-stiggia/k3b_audio_0_12.inf /tmp/kde-stiggia/k3b_audio_0_13.inf /tmp/kde-stiggia/k3b_audio_0_14.inf /tmp/kde-stiggia/k3b_audio_0_15.inf /tmp/kde-stiggia/k3b_audio_0_16.inf /tmp/kde-stiggia/k3b_audio_0_17.inf /tmp/kde-stiggia/k3b_audio_0_18.inf
Comment