Announcement

Collapse
No announcement yet.

K3b will not burn Data DVD.

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    K3b will not burn Data DVD.

    ever had this problem before, so I will give as much information as possible. I am trying to make a data DVD of several video files. I can burn them to CD no problem, but not DVD. I do not see anything in the logs resembling an error message either.

    Kubuntu 9.04
    KDE 4.3.0.0

    I have two LITE-ON DVDRW LH-20A1H. /dev/sr0 & /dev/sr1

    Here is a screen of my window when it shows the writing failed:
    [img width=384 height=400]http://i10.photobucket.com/albums/a130/phin666/K3B_screen.jpg[/img]

    And here is the log:
    Code:
    System
    -----------------------
    K3b Version: 1.0.5
    
    KDE Version: 3.5.10
    QT Version: 3.3.8b
    Kernel:   2.6.28-15-generic
    Devices
    -----------------------
    LITE-ON DVDRW LH-20A1H LL05 (/dev/sr0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, 
    DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, 
    DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, 
    RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
    
    LITE-ON DVDRW LH-20A1H LL0B (/dev/sr1, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, 
    DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, 
    DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, 
    RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
    Burned media
    -----------------------
    DVD+R
    
    K3bIsoImager
    -----------------------
    mkisofs print size result: 1207092 (2472124416 bytes)
    Pipe throughput: 33607296 bytes read, 33602816 bytes written.
    
    Used versions
    -----------------------
    mkisofs: 1.1.9
    growisofs: 7.1
    
    growisofs
    -----------------------
    Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr1 obs=32k seek=0'
    /dev/sr1: "Current Write Speed" is 16.4x1352KBps.
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
         0/2472124416 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU  0.0%
    :-[ WRITE@LBA=0h failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
    :-( write failed: Input/output error
    
    growisofs command:
    -----------------------
    /usr/bin/growisofs -Z /dev/sr1=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1207092 
    -speed=16 -overburn -use-the-force-luke=bufsize:32m 
    
    mkisofs
    -----------------------
    1207092
    I: -input-charset not specified, using utf-8 (detected in locale settings)
     0.04% done, estimate finish Sun Aug 30 01:51:28 2009
     0.08% done, estimate finish Sun Aug 30 01:31:54 2009
     0.12% done, estimate finish Sun Aug 30 01:25:16 2009
     0.17% done, estimate finish Sun Aug 30 01:21:51 2009
     0.21% done, estimate finish Sun Aug 30 01:19:53 2009
     0.25% done, estimate finish Sun Aug 30 01:18:33 2009
     0.29% done, estimate finish Sun Aug 30 01:17:36 2009
     0.33% done, estimate finish Sun Aug 30 01:16:52 2009
     0.37% done, estimate finish Sun Aug 30 01:16:19 2009
     0.41% done, estimate finish Sun Aug 30 01:15:53 2009
     0.46% done, estimate finish Sun Aug 30 01:15:31 2009
     0.50% done, estimate finish Sun Aug 30 01:15:12 2009
     0.54% done, estimate finish Sun Aug 30 01:14:57 2009
     0.58% done, estimate finish Sun Aug 30 01:14:44 2009
     0.62% done, estimate finish Sun Aug 30 01:14:32 2009
     0.66% done, estimate finish Sun Aug 30 01:14:22 2009
     0.70% done, estimate finish Sun Aug 30 01:14:13 2009
     0.75% done, estimate finish Sun Aug 30 01:14:06 2009
     0.79% done, estimate finish Sun Aug 30 01:13:59 2009
     0.83% done, estimate finish Sun Aug 30 01:13:52 2009
     0.87% done, estimate finish Sun Aug 30 01:13:46 2009
     0.91% done, estimate finish Sun Aug 30 01:13:41 2009
     0.95% done, estimate finish Sun Aug 30 01:13:36 2009
     1.00% done, estimate finish Sun Aug 30 01:13:32 2009
     1.04% done, estimate finish Sun Aug 30 01:13:28 2009
     1.08% done, estimate finish Sun Aug 30 01:13:24 2009
     1.12% done, estimate finish Sun Aug 30 01:13:21 2009
     1.16% done, estimate finish Sun Aug 30 01:13:18 2009
     1.20% done, estimate finish Sun Aug 30 01:13:15 2009
     1.24% done, estimate finish Sun Aug 30 01:13:12 2009
     1.28% done, estimate finish Sun Aug 30 01:13:09 2009
     1.33% done, estimate finish Sun Aug 30 01:13:07 2009
    
    mkisofs calculate size command:
    -----------------------
    /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Watchmen -volset -appid K3B THE CD KREATOR (C) 1998-2006 
    SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-paul/k3bn68Rpb.tmp 
    -rational-rock -hide-list /tmp/kde-paul/k3btCl51a.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-paul/k3bLPmz5a.tmp -no-cache-inodes 
    -allow-limited-size -udf -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-paul/k3b1Z60ba.tmp 
    
    mkisofs command:
    -----------------------
    /usr/bin/genisoimage -gui -graft-points -volid Watchmen -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM 
    -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-paul/k3bb2Yegb.tmp -rational-rock -hide-list /tmp/kde-paul/k3bByxsjc.tmp 
    -joliet -joliet-long -hide-joliet-list /tmp/kde-paul/k3bDFq6Db.tmp -no-cache-inodes -allow-limited-size -udf -full-iso9660-filenames -iso-level 2 -path-list 
    /tmp/kde-paul/k3b0PAfma.tmp
    I manually wrapped those lines for ease of reading in this posting.

    I have tried several different files to make sure that it was my source for some reason. Also, I have gone through a few DVD's. I have to be honest, I wouldn't understand the log unless it yelled at me what was wrong. Can anyone tell me what is going on?

    #2
    Re: K3b will not burn Data DVD.

    well I know I'v seen that befor........I just dont remember if or how I got around it

    did K3b ask you if it should use UDF? ............if so try NO.

    and try a slower speed .....looks like you were burning at 16x go down to 8 or even 4x.

    I'll try to burn a large file later and see what happens ......if I can reproduse the error.

    IF you can split the file down to smaller pices under 2 Gig you mite avoid the use of UDF and the error but realey you shouldent half to in therey

    I'm plucking at straws hear so wate for more post's

    VINNY
    i7 4core HT 8MB L3 2.9GHz
    16GB RAM
    Nvidia GTX 860M 4GB RAM 1152 cuda cores

    Comment


      #3
      Re: K3b will not burn Data DVD.

      I apprecate the reply, however I have not been able to test your idea's as of yet. I had an update notification this morning and now I cannot log into any users. So once I figure that out, I will try this solution.

      Comment


        #4
        Re: K3b will not burn Data DVD.

        That has been reported as a bug, but not yet confirmed.
        https://bugs.edge.launchpad.net/ubun...3b/+bug/415291

        I doubt it is a bug because file sizes greater than 2GB have been supported by the kernel since 2.4. However, to test your hardware and kernel use the following command to create a 4.3GB file on your system.

        dd if=/dev/zero of=/tmp/myhugefile bs=1M count=4300
        If that works then in the "Burn" dialog, switch to the "Filesystem" page, press the "Custom" button in the "File System" tab, in the "File System Settings" tree, select "Level 3" for "ISO9660 Settings | ISO Level".
        "A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
        – John F. Kennedy, February 26, 1962.

        Comment


          #5
          Re: K3b will not burn Data DVD.

          I've had this problem before with K3b when it just wouldn't recognize or burn a disc.

          A strange workaround I discovered was to put in a good DVD or CD and let the computer mount and read it. Browse it to make sure.

          Then eject the CD/DVD and try K3b again.

          Yeah, I know ...

          Comment


            #6
            Re: K3b will not burn Data DVD.

            OK sorey it took so long

            I just took a 4.1Gig folder that contaned 12 -350 or so Mib .AVI's and durned it as a data DVD no problem?

            I onley had the option to burn at 2.50x or 4x and I chose 2.50x............in the
            then in the "Burn" dialog, switch to the "Filesystem" page, press the "Custom" button in the "File System" tab, in the "File System Settings" tree, select "Level 3" for "ISO9660 Settings | ISO Level".
            that GreyGeek spoke of I was at level 2 and on the top of that dialog box I onley have

            generate rock ridge extentions.....checked
            generate joyliet extentions.......checked
            generate UDF structur......NOT checked

            so I dont know mine is working OK.............

            VINNY
            i7 4core HT 8MB L3 2.9GHz
            16GB RAM
            Nvidia GTX 860M 4GB RAM 1152 cuda cores

            Comment

            Working...
            X