Dear all,
I recently purchased an Asus U81A from Bestbuy. For the most part I am happy with it except the fact that I can't get the following two things working:
1) Screen brightness and more importantly 2) NIC interface
I appreciate any help on getting the above two problems fixed. My wifi works fine but there is no sign of eth0.
Here are some hardware information on my network:
_________________________________________________
lspci:
05:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
_________________________________________________
lshw -C network:
WARNING: you should run this program as super-user.
*-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wmaster0
version: 00
serial: 00:22:fa:59:32:8c
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=iwlagn ip=192.168.1.3 latency=0 module=iwlagn multicast=yes wireless=IEEE 802.11abgn
*-network UNCLAIMED
description: Ethernet controller
product: Attansic Technology Corp.
vendor: Attansic Technology Corp.
physical id: 0
bus info: pci@0000:05:00.0
version: c0
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
*-network DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: b2:7b:dd:dd:58:88
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes
_________________________________________________
Windows vista recognizes my NIC as: Atheros AR8131 PCI-E Gigabit
I recently purchased an Asus U81A from Bestbuy. For the most part I am happy with it except the fact that I can't get the following two things working:
1) Screen brightness and more importantly 2) NIC interface
I appreciate any help on getting the above two problems fixed. My wifi works fine but there is no sign of eth0.
Here are some hardware information on my network:
_________________________________________________
lspci:
05:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
_________________________________________________
lshw -C network:
WARNING: you should run this program as super-user.
*-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wmaster0
version: 00
serial: 00:22:fa:59:32:8c
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=iwlagn ip=192.168.1.3 latency=0 module=iwlagn multicast=yes wireless=IEEE 802.11abgn
*-network UNCLAIMED
description: Ethernet controller
product: Attansic Technology Corp.
vendor: Attansic Technology Corp.
physical id: 0
bus info: pci@0000:05:00.0
version: c0
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
*-network DISABLED
description: Ethernet interface
physical id: 2
logical name: pan0
serial: b2:7b:dd:dd:58:88
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes
_________________________________________________
Windows vista recognizes my NIC as: Atheros AR8131 PCI-E Gigabit
Comment