Hi,
I'm rather new here at this site & was reading some info. It seems they are also interested here about new compactible hardware for Kubuntu.
So, I decide to post mine information, don't shoot me if it is posted on the wrong place...
Well I'm now running mine kubuntu for some months on this brand new PC and it runs verry good
1.Hardware I did use to assemble mine computer.
1.Motherboard = Asus P5Q Pro P45
2.CPU = Intel E8500 775 3166 Wolfendale (2 core)
3.Cooling units for mine CPU I use: Thermalright ultra Extreme 120 (Mounted on the CPU)
2 extra fan coolers mouted on the Thermaltake Ultra 120
Fan Coolers = Tacens Ventus Ice 120x120x25
4.Hard-Disk = Samsung 1TB Sata2
5.Ram's I use = 4Gig OCZ (D2 2GB 1150-555 Flex XLC K2 OCZ)
6.Graphical Card = Nvidia geforce 9800GFX+(OVERCLOCKED FACTORY)
7.Power suplly = OCZ ModXStream 700W
8.Case I use = Antec Nine Hundred
9.Screen = SyncMaster T220 Samsung
Note:
a. The networkcard I use is the network card onboard!
b. For sound, I use also the sound on board. I did connect there an Logitec sound system on! Runs nice 8)
2. Overclokking mine system:
Standard runs the computer with this configuration on a 3.16Ghz. But after mine nice overclock I run this to a 4.4Ghz :P :P :P
This runs verry good and I have also a nice overclock.
I did run also the torture test with prime95 up to 24Hours, and it is still stable and temperature is also still good.
Prime95 is windoze software, because I don't know if it exist for linux....
Annyway it is also free software 
Mine Bios Settings I use:
(THIS YOU CAN FIND BACK INTO YOUR BIOS UNDER THE NAME AI TWEAKER)
1.AI Overclock tuner = Manual
2.FSB Frequency = 455
3.PCIE Frequency = 100 (always FIX at 100!)
4.FSB strap to North bridge = 333Mhz
5.DRAM FREQUENCY = DDR2-1093Mhz
6.DRAM timing control = MANUAL
CAS# Latency = 5
DRAM RAS # to CAS# Delay = 5
DRAM RAS# Precharge = 5
DRAM RAS# Activate to Precha = 18
7.CPU Voltage = 1.45625
8.FSB Termination voltage = 1.30
9.DRAM Voltage = 2.20
10.NB Voltage = 1.40
11.SB Voltage = 1.10
Notes:
1.Only use above settings for the same hardware & cooling options. A bad cooling option will destroy your PC!
2.Don't install the latest Bios Update from Dec.2008 or higher!
3.With same hardware you should normally be able to do the same! You can also do the prime test to see if it is stable...
Info I get from the Bash Konsole
frederik@Kubuntu:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:53:41 UTC 2009 (Ubuntu 2.6.27-11.31-generic)
[ 0.000000] Command line: root=UUID=745402d8-803f-4dee-a827-426a550f1dc6 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff70000 page 4k
[ 0.000000] kernel direct mapping tables up to cff70000 @ 10000-16000
[ 0.000000] last_map_addr: cff70000 end: cff70000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
[ 0.000000] last_map_addr: 130000000 end: 130000000
[ 0.000000] RAMDISK: 377ae000 - 37fefdfc
[ 0.000000] ACPI: RSDP 000FB420, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 11000804 MSFT 97)
[ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 11000804 MSFT 97)
[ 0.000000] ACPI: DSDT CFF70440, 9682 (r1 A1012 A1012001 1 INTL 20060113)
[ 0.000000] ACPI: FACS CFF7E000, 0040
[ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 11000804 MSFT 97)
[ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 11000804 MSFT 97)
[ 0.000000] ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM 11000804 MSFT 97)
[ 0.000000] ACPI: HPET CFF79AD0, 0038 (r1 A_M_I_ OEMHPET 11000804 MSFT 97)
[ 0.000000] ACPI: OSFR CFF79B10, 00B0 (r1 A_M_I_ OEMOSFR 11000804 MSFT 97)
[ 0.000000] ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 000000000003ffff] pages 26
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c]
[ 0.000000] #3 [00377ae000 - 0037fefdfc] RAMDISK ==> [00377ae000 - 0037fefdfc]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048317
[ 0.000000] DMA zone: 2088 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027032
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=745402d8-803f-4dee-a827-426a550f1dc6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 4388.969 MHz processor. 8) 8) 8) 8) 8) 8)
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 4045932k/4980736k available (3115k kernel code, 147336k reserved, 1573k data, 540k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8777.93 BogoMIPS (lpj=17555876)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080609
[ 0.005501] ACPI: Checking initramfs for custom DSDT
[ 0.181306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220998] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.220999] Using local APIC timer interrupts.
[ 0.224014] APIC timer calibration result 28874894
[ 0.224015] Detected 28.874 MHz APIC timer.
[ 0.224076] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 8777.97 BogoMIPS (lpj=17555955)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.312597] CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.312608] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.316039] Brought up 2 CPUs
[ 0.316041] Total of 2 processors activated (17555.91 BogoMIPS).
[ 0.316077] CPU0 attaching sched-domain:
[ 0.316078] domain 0: span 0-1 level MC
[ 0.316079] groups: 0 1
[ 0.316081] domain 1: span 0-1 level NODE
[ 0.316082] groups: 0-1
[ 0.316084] CPU1 attaching sched-domain:
[ 0.316084] domain 0: span 0-1 level MC
[ 0.316085] groups: 1 0
[ 0.316086] domain 1: span 0-1 level NODE
[ 0.316087] groups: 0-1
[ 0.316134] net_namespace: 1552 bytes
[ 0.316134] Booting paravirtualized kernel on bare hardware
[ 0.316155] Time: 9:36:25 Date: 04/18/09
[ 0.316171] NET: Registered protocol family 16
[ 0.316179] ACPI: bus type pci registered
[ 0.316179] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.316179] PCI: Not using MMCONFIG.
[ 0.316179] PCI: Using configuration type 1 for base access
[ 0.316453] ACPI: EC: Look up EC in DSDT
[ 0.326842] ACPI: Interpreter enabled
[ 0.326843] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.326851] ACPI: Using IOAPIC for interrupt routing
[ 0.326886] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.328683] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.332581] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.337293] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.337293] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:01.0: PME# disabled
[ 0.337293] PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f]
[ 0.337293] PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f]
[ 0.337293] PCI: 0000:00:1a.2 reg 20 io port: [bc00, bc1f]
[ 0.337293] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff]
[ 0.337293] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1a.7: PME# disabled
[ 0.337293] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
[ 0.337293] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1b.0: PME# disabled
[ 0.337293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.0: PME# disabled
[ 0.337293] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.4: PME# disabled
[ 0.337293] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.5: PME# disabled
[ 0.337293] PCI: 0000:00:1d.0 reg 20 io port: [b080, b09f]
[ 0.337293] PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
[ 0.337293] PCI: 0000:00:1d.2 reg 20 io port: [b480, b49f]
[ 0.337293] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff]
[ 0.337293] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1d.7: PME# disabled
[ 0.337293] PCI: 0000:00:1f.2 reg 10 io port: [a000, a007]
[ 0.337293] PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03]
[ 0.337293] PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887]
[ 0.337293] PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803]
[ 0.337293] PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f]
[ 0.337293] PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f]
[ 0.337293] PCI: 0000:00:1f.3 reg 10 64bit mmio: [f9fff400, f9fff4ff]
[ 0.337293] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.337293] PCI: 0000:00:1f.5 reg 10 io port: [b000, b007]
[ 0.337293] PCI: 0000:00:1f.5 reg 14 io port: [ac00, ac03]
[ 0.337293] PCI: 0000:00:1f.5 reg 18 io port: [a880, a887]
[ 0.337293] PCI: 0000:00:1f.5 reg 1c io port: [a800, a803]
[ 0.337293] PCI: 0000:00:1f.5 reg 20 io port: [a480, a48f]
[ 0.337293] PCI: 0000:00:1f.5 reg 24 io port: [a400, a40f]
[ 0.337293] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f]
[ 0.337293] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8e0000, fe8fffff]
[ 0.337293] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.337293] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fe8fffff]
[ 0.337293] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.337293] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8f00000, f8ffffff]
[ 0.337293] PCI: 0000:03:00.0 reg 10 io port: [ec00, ec07]
[ 0.337293] PCI: 0000:03:00.0 reg 14 io port: [e880, e883]
[ 0.337293] PCI: 0000:03:00.0 reg 18 io port: [e800, e807]
[ 0.337293] PCI: 0000:03:00.0 reg 1c io port: [e480, e483]
[ 0.337293] PCI: 0000:03:00.0 reg 20 io port: [e400, e40f]
[ 0.337293] PCI: 0000:03:00.0 reg 24 32bit mmio: [feaffc00, feafffff]
[ 0.337293] pci 0000:03:00.0: supports D1
[ 0.337293] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.337293] pci 0000:03:00.0: PME# disabled
[ 0.337293] PCI: bridge 0000:00:1c.4 io port: [e000, efff]
[ 0.337293] PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff]
[ 0.337293] PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9c0000, fe9fffff]
[ 0.337293] PCI: 0000:02:00.0 reg 18 io port: [dc00, dc7f]
[ 0.337293] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.337293] pci 0000:02:00.0: PME# disabled
[ 0.337293] PCI: bridge 0000:00:1c.5 io port: [d000, dfff]
[ 0.337293] PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff]
[ 0.337293] PCI: 0000:05:03.0 reg 10 32bit mmio: [febff000, febfffff]
[ 0.337293] pci 0000:05:03.0: supports D1
[ 0.337293] pci 0000:05:03.0: supports D2
[ 0.337293] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.337293] pci 0000:05:03.0: PME# disabled
[ 0.337293] pci 0000:00:1e.0: transparent bridge
[ 0.337293] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff]
[ 0.337293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.337316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.337379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.337478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.337542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.337613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.348608] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.348608] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.348659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.348694] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B1, should be B0 [20080609]
[ 0.348694] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.348694] pnp: PnP ACPI init
[ 0.348694] ACPI: bus type pnp registered
[ 0.352399] pnp: PnP ACPI: found 17 devices
[ 0.352399] ACPI: ACPI bus type pnp unregistered
[ 0.352399] PCI: Using ACPI for IRQ routing
[ 0.372028] NET: Registered protocol family 8
[ 0.372030] NET: Registered protocol family 20
[ 0.372039] NetLabel: Initializing
[ 0.372039] NetLabel: domain hash size = 128
[ 0.372039] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.372046] NetLabel: unlabeled traffic allowed by default
[ 0.372058] PCI-GART: No AMD northbridge found.
[ 0.372062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.372065] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.374152] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.374152] actual entries 65586
[ 0.374190] AppArmor: AppArmor Filesystem Enabled
[ 0.374203] ACPI: RTC can wake from S4
[ 0.388036] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
I'm rather new here at this site & was reading some info. It seems they are also interested here about new compactible hardware for Kubuntu.
So, I decide to post mine information, don't shoot me if it is posted on the wrong place...
Well I'm now running mine kubuntu for some months on this brand new PC and it runs verry good
1.Hardware I did use to assemble mine computer.
1.Motherboard = Asus P5Q Pro P45
2.CPU = Intel E8500 775 3166 Wolfendale (2 core)
3.Cooling units for mine CPU I use: Thermalright ultra Extreme 120 (Mounted on the CPU)
2 extra fan coolers mouted on the Thermaltake Ultra 120
Fan Coolers = Tacens Ventus Ice 120x120x25
4.Hard-Disk = Samsung 1TB Sata2
5.Ram's I use = 4Gig OCZ (D2 2GB 1150-555 Flex XLC K2 OCZ)
6.Graphical Card = Nvidia geforce 9800GFX+(OVERCLOCKED FACTORY)
7.Power suplly = OCZ ModXStream 700W
8.Case I use = Antec Nine Hundred
9.Screen = SyncMaster T220 Samsung
Note:
a. The networkcard I use is the network card onboard!
b. For sound, I use also the sound on board. I did connect there an Logitec sound system on! Runs nice 8)
2. Overclokking mine system:
Standard runs the computer with this configuration on a 3.16Ghz. But after mine nice overclock I run this to a 4.4Ghz :P :P :P
This runs verry good and I have also a nice overclock.
I did run also the torture test with prime95 up to 24Hours, and it is still stable and temperature is also still good.
Prime95 is windoze software, because I don't know if it exist for linux....
Annyway it is also free software Mine Bios Settings I use:
(THIS YOU CAN FIND BACK INTO YOUR BIOS UNDER THE NAME AI TWEAKER)
1.AI Overclock tuner = Manual
2.FSB Frequency = 455
3.PCIE Frequency = 100 (always FIX at 100!)
4.FSB strap to North bridge = 333Mhz
5.DRAM FREQUENCY = DDR2-1093Mhz
6.DRAM timing control = MANUAL
CAS# Latency = 5
DRAM RAS # to CAS# Delay = 5
DRAM RAS# Precharge = 5
DRAM RAS# Activate to Precha = 18
7.CPU Voltage = 1.45625
8.FSB Termination voltage = 1.30
9.DRAM Voltage = 2.20
10.NB Voltage = 1.40
11.SB Voltage = 1.10
Notes:
1.Only use above settings for the same hardware & cooling options. A bad cooling option will destroy your PC!
2.Don't install the latest Bios Update from Dec.2008 or higher!
3.With same hardware you should normally be able to do the same! You can also do the prime test to see if it is stable...
Info I get from the Bash Konsole
frederik@Kubuntu:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:53:41 UTC 2009 (Ubuntu 2.6.27-11.31-generic)
[ 0.000000] Command line: root=UUID=745402d8-803f-4dee-a827-426a550f1dc6 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff70000 page 4k
[ 0.000000] kernel direct mapping tables up to cff70000 @ 10000-16000
[ 0.000000] last_map_addr: cff70000 end: cff70000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
[ 0.000000] last_map_addr: 130000000 end: 130000000
[ 0.000000] RAMDISK: 377ae000 - 37fefdfc
[ 0.000000] ACPI: RSDP 000FB420, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 11000804 MSFT 97)
[ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 11000804 MSFT 97)
[ 0.000000] ACPI: DSDT CFF70440, 9682 (r1 A1012 A1012001 1 INTL 20060113)
[ 0.000000] ACPI: FACS CFF7E000, 0040
[ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 11000804 MSFT 97)
[ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 11000804 MSFT 97)
[ 0.000000] ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM 11000804 MSFT 97)
[ 0.000000] ACPI: HPET CFF79AD0, 0038 (r1 A_M_I_ OEMHPET 11000804 MSFT 97)
[ 0.000000] ACPI: OSFR CFF79B10, 00B0 (r1 A_M_I_ OEMOSFR 11000804 MSFT 97)
[ 0.000000] ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 000000000003ffff] pages 26
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c]
[ 0.000000] #3 [00377ae000 - 0037fefdfc] RAMDISK ==> [00377ae000 - 0037fefdfc]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048317
[ 0.000000] DMA zone: 2088 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027032
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=745402d8-803f-4dee-a827-426a550f1dc6 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 4388.969 MHz processor. 8) 8) 8)
8) 8) 8) [ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 4045932k/4980736k available (3115k kernel code, 147336k reserved, 1573k data, 540k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8777.93 BogoMIPS (lpj=17555876)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 0/0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080609
[ 0.005501] ACPI: Checking initramfs for custom DSDT
[ 0.181306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220998] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.220999] Using local APIC timer interrupts.
[ 0.224014] APIC timer calibration result 28874894
[ 0.224015] Detected 28.874 MHz APIC timer.
[ 0.224076] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 8777.97 BogoMIPS (lpj=17555955)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.312597] CPU1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.312608] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.316039] Brought up 2 CPUs
[ 0.316041] Total of 2 processors activated (17555.91 BogoMIPS).
[ 0.316077] CPU0 attaching sched-domain:
[ 0.316078] domain 0: span 0-1 level MC
[ 0.316079] groups: 0 1
[ 0.316081] domain 1: span 0-1 level NODE
[ 0.316082] groups: 0-1
[ 0.316084] CPU1 attaching sched-domain:
[ 0.316084] domain 0: span 0-1 level MC
[ 0.316085] groups: 1 0
[ 0.316086] domain 1: span 0-1 level NODE
[ 0.316087] groups: 0-1
[ 0.316134] net_namespace: 1552 bytes
[ 0.316134] Booting paravirtualized kernel on bare hardware
[ 0.316155] Time: 9:36:25 Date: 04/18/09
[ 0.316171] NET: Registered protocol family 16
[ 0.316179] ACPI: bus type pci registered
[ 0.316179] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.316179] PCI: Not using MMCONFIG.
[ 0.316179] PCI: Using configuration type 1 for base access
[ 0.316453] ACPI: EC: Look up EC in DSDT
[ 0.326842] ACPI: Interpreter enabled
[ 0.326843] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.326851] ACPI: Using IOAPIC for interrupt routing
[ 0.326886] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.328683] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.332581] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.337293] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.337293] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:01.0: PME# disabled
[ 0.337293] PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f]
[ 0.337293] PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f]
[ 0.337293] PCI: 0000:00:1a.2 reg 20 io port: [bc00, bc1f]
[ 0.337293] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff]
[ 0.337293] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1a.7: PME# disabled
[ 0.337293] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
[ 0.337293] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1b.0: PME# disabled
[ 0.337293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.0: PME# disabled
[ 0.337293] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.4: PME# disabled
[ 0.337293] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1c.5: PME# disabled
[ 0.337293] PCI: 0000:00:1d.0 reg 20 io port: [b080, b09f]
[ 0.337293] PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
[ 0.337293] PCI: 0000:00:1d.2 reg 20 io port: [b480, b49f]
[ 0.337293] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff]
[ 0.337293] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.337293] pci 0000:00:1d.7: PME# disabled
[ 0.337293] PCI: 0000:00:1f.2 reg 10 io port: [a000, a007]
[ 0.337293] PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03]
[ 0.337293] PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887]
[ 0.337293] PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803]
[ 0.337293] PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f]
[ 0.337293] PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f]
[ 0.337293] PCI: 0000:00:1f.3 reg 10 64bit mmio: [f9fff400, f9fff4ff]
[ 0.337293] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.337293] PCI: 0000:00:1f.5 reg 10 io port: [b000, b007]
[ 0.337293] PCI: 0000:00:1f.5 reg 14 io port: [ac00, ac03]
[ 0.337293] PCI: 0000:00:1f.5 reg 18 io port: [a880, a887]
[ 0.337293] PCI: 0000:00:1f.5 reg 1c io port: [a800, a803]
[ 0.337293] PCI: 0000:00:1f.5 reg 20 io port: [a480, a48f]
[ 0.337293] PCI: 0000:00:1f.5 reg 24 io port: [a400, a40f]
[ 0.337293] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
[ 0.337293] PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f]
[ 0.337293] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8e0000, fe8fffff]
[ 0.337293] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.337293] PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fe8fffff]
[ 0.337293] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.337293] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8f00000, f8ffffff]
[ 0.337293] PCI: 0000:03:00.0 reg 10 io port: [ec00, ec07]
[ 0.337293] PCI: 0000:03:00.0 reg 14 io port: [e880, e883]
[ 0.337293] PCI: 0000:03:00.0 reg 18 io port: [e800, e807]
[ 0.337293] PCI: 0000:03:00.0 reg 1c io port: [e480, e483]
[ 0.337293] PCI: 0000:03:00.0 reg 20 io port: [e400, e40f]
[ 0.337293] PCI: 0000:03:00.0 reg 24 32bit mmio: [feaffc00, feafffff]
[ 0.337293] pci 0000:03:00.0: supports D1
[ 0.337293] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.337293] pci 0000:03:00.0: PME# disabled
[ 0.337293] PCI: bridge 0000:00:1c.4 io port: [e000, efff]
[ 0.337293] PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff]
[ 0.337293] PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9c0000, fe9fffff]
[ 0.337293] PCI: 0000:02:00.0 reg 18 io port: [dc00, dc7f]
[ 0.337293] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.337293] pci 0000:02:00.0: PME# disabled
[ 0.337293] PCI: bridge 0000:00:1c.5 io port: [d000, dfff]
[ 0.337293] PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff]
[ 0.337293] PCI: 0000:05:03.0 reg 10 32bit mmio: [febff000, febfffff]
[ 0.337293] pci 0000:05:03.0: supports D1
[ 0.337293] pci 0000:05:03.0: supports D2
[ 0.337293] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.337293] pci 0000:05:03.0: PME# disabled
[ 0.337293] pci 0000:00:1e.0: transparent bridge
[ 0.337293] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff]
[ 0.337293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.337316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.337379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.337478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.337542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.337613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.348608] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.348608] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.348608] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.348659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.348694] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B1, should be B0 [20080609]
[ 0.348694] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.348694] pnp: PnP ACPI init
[ 0.348694] ACPI: bus type pnp registered
[ 0.352399] pnp: PnP ACPI: found 17 devices
[ 0.352399] ACPI: ACPI bus type pnp unregistered
[ 0.352399] PCI: Using ACPI for IRQ routing
[ 0.372028] NET: Registered protocol family 8
[ 0.372030] NET: Registered protocol family 20
[ 0.372039] NetLabel: Initializing
[ 0.372039] NetLabel: domain hash size = 128
[ 0.372039] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.372046] NetLabel: unlabeled traffic allowed by default
[ 0.372058] PCI-GART: No AMD northbridge found.
[ 0.372062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.372065] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.374152] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.374152] actual entries 65586
[ 0.374190] AppArmor: AppArmor Filesystem Enabled
[ 0.374203] ACPI: RTC can wake from S4
[ 0.388036] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved