Having been stupid and screwing the onboard sound card, I bought an external USB sound card as a replacement. I plugged it in and booted up and found it was detected automatically. I made it the defualt sound card using asoundconf and tested it. The sound that came out was horribly distorted, as though the treble was too high. It reminds me of a compression tube sound from a guitar, or the top of a flanger sound.
I booted into Windows and after installing the drivers, the sound card works perfectly. No distortion at all, and works as it should. So I've done lots of searching but not been very successful and so I'm here hoping someone can point me in the right direction. Is it drivers not being fully compatible? Something to do with the kernel? Should I jump back to 8.04. I bought this card as I read that people had it working in Linux and Ubuntu.
Some info, I don't know if it will help.
I've now turned off the onboard sound card which is why it doesn't show. I thought it would help with the distortion problem, but no help at all.
If you need more info, let me know. Any help would be appreciated.
I booted into Windows and after installing the drivers, the sound card works perfectly. No distortion at all, and works as it should. So I've done lots of searching but not been very successful and so I'm here hoping someone can point me in the right direction. Is it drivers not being fully compatible? Something to do with the kernel? Should I jump back to 8.04. I bought this card as I read that people had it working in Linux and Ubuntu.
Some info, I don't know if it will help.
Code:
lsusb Bus 002 Device 005: ID 187c:0511 Bus 002 Device 004: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub Bus 002 Device 002: ID 0424:2502 Standard Microsystems Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device (This is the sound card) Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Code:
aplay -l **** List of PLAYBACK Hardware Devices **** card 1: default [USB Sound Device ], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0
If you need more info, let me know. Any help would be appreciated.
Comment