Hi to all,
I have a laptop HP Elitebook 8530W sice 3 days and I have installed Kubuntu 8.10.
Configuration of my laptop:
Intel® Core™ 2 Duo Processor T9400 (2.53 GHz, 6 MB L2 cache, 1066 MHz FSB)
Chipset
Mobile Intel® PM45 Express Chipset ICH9M-Enhanced pecialized Design
HP 3D DriveGuard; Intel® Centrino® 2 with vPro™ processor technology capable on select models
Memory 4 GB 800 MHz DDR2 SDRAM
Storage Hard drive 320 GB 7200 rpm SATA II
DVD LightScribe DVD+/-RW SuperMulti with Double Layer
Display size 15.4-inch diagonal WUXGA+ anti-glare
Graphics NVIDIA Quadro FX 770M with 512 MB of dedicated video memory
Integrated camera 2 MP Webcam
4 USB 2.0
1 1394a
1 RJ-11
1 RJ-45
1 microphone in
1 headphone/line-out
1 docking connector
1 HDMI
1 battery connector
1 eSATA
1 external VGA monitor
1 Express Card/54
1 media card reader
Audio
High Definition Audio support w/24-bit DAC; Integrated stereo speakers; Integrated dual-microphone array; Touch-sensitive controls for volume up, volume down, and mute; Stereo headphone/line out; Stereo microphone in;
Integrated Intel Gigabit Network Connection (10/100/1000 NIC)
Modem
56K V.92 modem
Wireless
HP Mobile Broadband (powered by Gobi™); Intel 802.11a/b/g draft-n; HP Integrated Module with Bluetooth 2.0 Wireless Technology
I have some problems with the HW:
1)I have to disable ACPI on the boot if not the kernel hang up.
2) The PC wan't switch off durind shut down
3) I have an external 20" monito but I can't switch to the external one (VGA cable connected trough a docking station)
4)Static IP LAN only possible using ifup and configuration file, doesn't work with networkmanager program
5) WLAN: Networkmanager sometimes don't see the access point but if configured
Do someone had the same problems and can help me ?
Thanks
Gian Carlo
I have a laptop HP Elitebook 8530W sice 3 days and I have installed Kubuntu 8.10.
Configuration of my laptop:
Intel® Core™ 2 Duo Processor T9400 (2.53 GHz, 6 MB L2 cache, 1066 MHz FSB)
Chipset
Mobile Intel® PM45 Express Chipset ICH9M-Enhanced pecialized Design
HP 3D DriveGuard; Intel® Centrino® 2 with vPro™ processor technology capable on select models
Memory 4 GB 800 MHz DDR2 SDRAM
Storage Hard drive 320 GB 7200 rpm SATA II
DVD LightScribe DVD+/-RW SuperMulti with Double Layer
Display size 15.4-inch diagonal WUXGA+ anti-glare
Graphics NVIDIA Quadro FX 770M with 512 MB of dedicated video memory
Integrated camera 2 MP Webcam
4 USB 2.0
1 1394a
1 RJ-11
1 RJ-45
1 microphone in
1 headphone/line-out
1 docking connector
1 HDMI
1 battery connector
1 eSATA
1 external VGA monitor
1 Express Card/54
1 media card reader
Audio
High Definition Audio support w/24-bit DAC; Integrated stereo speakers; Integrated dual-microphone array; Touch-sensitive controls for volume up, volume down, and mute; Stereo headphone/line out; Stereo microphone in;
Integrated Intel Gigabit Network Connection (10/100/1000 NIC)
Modem
56K V.92 modem
Wireless
HP Mobile Broadband (powered by Gobi™); Intel 802.11a/b/g draft-n; HP Integrated Module with Bluetooth 2.0 Wireless Technology
I have some problems with the HW:
1)I have to disable ACPI on the boot if not the kernel hang up.
2) The PC wan't switch off durind shut down
3) I have an external 20" monito but I can't switch to the external one (VGA cable connected trough a docking station)
4)Static IP LAN only possible using ifup and configuration file, doesn't work with networkmanager program
5) WLAN: Networkmanager sometimes don't see the access point but if configured
Do someone had the same problems and can help me ?
Thanks
Gian Carlo
Comment