Announcement

Collapse
No announcement yet.

Another Noob with a wireless issue.

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Another Noob with a wireless issue.

    HI all, just getting into the Kubuntu thing - so far so good. Everything running fine apart from the wireless - now i know there is a lot around on this because i have spent the last 4 hours trolling the forums and trying out various fixes and suggestions but no joy as yet.

    Details - i am using a Netgear WN121T Usb card in the pc - i notice this is not in the list of supported Netgear devices in Kubuntu. I have noticed that some have got it working though.

    I have run through the setup of ndiswrapper and ndisgtk - both are installed without any issues.

    I have downloaded and installed the .inf files for my card supplied in this link http://ubuntuforums.org/showthread.php?t=537281 as all the other downloads i could find were .exes.

    Windows Wireless networks successfully installed the inf files - and the result displaying is the name of the file (wn121t) and the text "Hardware Present:Yes" - now some of what i have read stated that there should also be text stating "Driver Present" - this does not appear so it may be a starting point.

    When using Wireless Assistant i am getting unfortunately what a lot of people are getting - "No usable wireless devices found."

    I am not much good with the command line as i have been a windows guy for many years but would really appreciate any help you guys can give and i am more than happy to run commands you would like me to and post the results for you. Hope to get this sorted soon.

    Many thanks.
    Reg.


    #2
    Re: Another Noob with a wireless issue.

    O.K., now please open a konsole and enter
    Code:
    lspci -v
    and then enter
    Code:
    ndiswrapper -l
    (that's the letter "l", not the number "1") and post the results of both here in codeboxes (use the "#" tag from the tools in the "Post Reply" box).
    The next brick house on the left
    Intel i7 11th Gen | 16GB | 1TB | KDE Plasma 5.27.11​| Kubuntu 24.04 | 6.8.0-31-generic



    Comment


      #3
      Re: Another Noob with a wireless issue.

      OK thanks - the results for the first command are:
      Code:
      00:00.0 Host bridge: nVidia Corporation C55 Host Bridge (rev a2)
          Flags: bus master, 66MHz, fast devsel, latency 0
          Capabilities: <access denied>
      
      00:00.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:00.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:00.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: bus master, 66MHz, fast devsel, latency 0
      
      00:00.4 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: bus master, 66MHz, fast devsel, latency 0
      
      00:00.5 RAM memory: nVidia Corporation C55 Memory Controller (rev a2)
          Flags: bus master, 66MHz, fast devsel, latency 0
      
      00:00.6 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:00.7 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.0 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.4 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.5 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:01.6 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:02.0 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:02.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: bus master, 66MHz, fast devsel, latency 0
      
      00:02.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
          Flags: 66MHz, fast devsel
      
      00:03.0 PCI bridge: nVidia Corporation C55 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
          Flags: bus master, fast devsel, latency 0
          Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
          I/O behind bridge: 0000b000-0000bfff
          Memory behind bridge: f8000000-fbffffff
          Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
          Capabilities: <access denied>
      
      00:07.0 PCI bridge: nVidia Corporation C55 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
          Flags: bus master, fast devsel, latency 0
          Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
          I/O behind bridge: 00008000-00009fff
          Memory behind bridge: fdd00000-fddfffff
          Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
          Capabilities: <access denied>
      
      00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0
          Capabilities: <access denied>
      
      00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0
      
      00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: 66MHz, fast devsel, IRQ 10
          I/O ports at 1c00 [size=64]
          I/O ports at 1c80 [size=64]
          Capabilities: <access denied>
      
      00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
          Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
          Flags: 66MHz, fast devsel
      
      00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI])
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
          Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
          Capabilities: <access denied>
      
      00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI])
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
          Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
          Capabilities: <access denied>
      
      00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
          Subsystem: Unknown device f043:81bc
          Flags: bus master, 66MHz, fast devsel, latency 0
          [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
          [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
          [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
          [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
          I/O ports at f400 [size=16]
          Capabilities: <access denied>
      
      00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
          I/O ports at 09f0 [size=8]
          I/O ports at 0bf0 [size=4]
          I/O ports at 0970 [size=8]
          I/O ports at 0b70 [size=4]
          I/O ports at e000 [size=16]
          Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
          Capabilities: <access denied>
      
      00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
          Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
          Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
          I/O ports at 09e0 [size=8]
          I/O ports at 0be0 [size=4]
          I/O ports at 0960 [size=8]
          I/O ports at 0b60 [size=4]
          I/O ports at cc00 [size=16]
          Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
          Capabilities: <access denied>
      
      00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
          Flags: bus master, 66MHz, fast devsel, latency 0
          Bus: primary=00, secondary=03, subordinate=03, sec-latency=128
          I/O behind bridge: 0000a000-0000afff
          Memory behind bridge: e8000000-efffffff
          Prefetchable memory behind bridge: fde00000-fdefffff
          Capabilities: <access denied>
      
      00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
          Subsystem: ASUSTeK Computer Inc. Unknown device 8221
          Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
          Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
          I/O ports at c800 [size=8]
          Capabilities: <access denied>
      
      01:00.0 VGA compatible controller: nVidia Corporation GeForce 8800 GT (rev a2) (prog-if 00 [VGA controller])
          Subsystem: ASUSTeK Computer Inc. Unknown device 8267
          Flags: bus master, fast devsel, latency 0, IRQ 16
          Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
          Memory at d0000000 (64-bit, prefetchable) [size=256M]
          Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
          I/O ports at bc00 [size=128]
          [virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
          Capabilities: <access denied>
      
      02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
          Subsystem: ASUSTeK Computer Inc. Unknown device 8208
          Flags: bus master, fast devsel, latency 0, IRQ 16
          I/O ports at 9c00 [size=8]
          I/O ports at 9800 [size=4]
          I/O ports at 9400 [size=8]
          I/O ports at 9000 [size=4]
          I/O ports at 8c00 [size=16]
          Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
          Capabilities: <access denied>
      
      03:06.0 Multimedia audio controller: Creative Labs SB X-Fi
          Subsystem: Creative Labs Unknown device 0031
          Flags: bus master, medium devsel, latency 32, IRQ 11
          I/O ports at ac00 [size=32]
          Memory at efc00000 (64-bit, non-prefetchable) [size=2M]
          Memory at e8000000 (64-bit, non-prefetchable) [size=64M]
          Capabilities: <access denied>
      
      03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0) (prog-if 10 [OHCI])
          Subsystem: ASUSTeK Computer Inc. Unknown device 81fe
          Flags: bus master, medium devsel, latency 32, IRQ 18
          Memory at effff000 (32-bit, non-prefetchable) [size=2K]
          I/O ports at a800 [size=128]
          Capabilities: <access denied>
      Results for the second command are:
      Code:
      dave@Eowyn:~$ ndiswrapper -l
      netmw245 : driver installed
          device (0846:7100) present
      wn121t : driver installed
          device (0846:7100) present
      Appreciate the help.

      Comment


        #4
        Re: Another Noob with a wireless issue.

        You are lucky ! I couldn't find ndisgtk or Wireless Assistant ! Can anyone suggest why ? (I installed Kubuntu 8.04.1)

        Comment


          #5
          Re: Another Noob with a wireless issue.

          I had no problem finding ndiswrapper or ndisgtk. I used Adept within Kubuntu itself, simply typed in ndisgtk and selected "Request Install" as usual - and job done.

          What i have found though is that a lot of people seem to forget that to use Adept properly and find this stuff they need to be on the internet at the time. If you were not on the internet when looking for it that is probably why you cant find it

          Anyone got any further ideas on my issue?

          Comment


            #6
            Re: Another Noob with a wireless issue.

            A small tip that I have found useful: When given command line directions, right click on the line and choose "copy". Then open the Terminal (I do it in another desktop) and point to the line after the prompt and right click again and choose "paste". Then hit "return" and allow the Terminal to run the line of instructions. Work back and forth with "copy" and "paste" until all the lines are run. I have found that this reduced the incidence of typos for me. Hope this helps.
            Bob I.

            Comment

            Working...
            X