I've tried burning it twice. Second time I did it the slowest my burner would let me. Both times I left the PC alone. I'm running Ubuntu 7.10. I'll try Brasero while you friendly people reply.
[img width=387 height=400]http://glue.umd.edu/~jwexler/kde.png[/img]
[img width=387 height=400]http://glue.umd.edu/~jwexler/kde.png[/img]
Code:
System ----------------------- K3b Version: 1.0.4 KDE Version: 3.5.9 QT Version: 3.3.8b Kernel: 2.6.24-16-generic Devices ----------------------- _NEC DVD_RW ND-3500AG 2.19 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite] K3bDataTrackReader ----------------------- reading sectors 0 to 352927 with sector size 2048. Length: 352928 sectors, 722796544 bytes. using buffer size of 64 blocks. Read a total of 352928 sectors (722796544 bytes) K3bMd5Job ----------------------- Reached max read of 722796544. Stopping after 722796544 bytes. Used versions ----------------------- cdrecord: 1.1.6 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identification : 'DVD_RW ND-3500AG' Revision : '2.19' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1343488 = 1312 KB FIFO size : 12582912 = 12288 KB Speed set to 1411 KB/s Track 01: data 689 MB Total size: 791 MB (78:25.70) = 352928 sectors Lout start: 791 MB (78:27/53) = 352928 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 6918 Starting to write CD/DVD at speed 8.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 689 MB written. Track 01: 1 of 689 MB written (fifo 99%) [buf 100%] 63.0x. Track 01: 2 of 689 MB written (fifo 100%) [buf 100%] 0.4x. ......<OMITTED BECAUSE OF REPETITION>..... Track 01: Total bytes read/written: 722796544/722796544 (352928 sectors). Writing time: 616.380s Average write speed 7.8x. Min drive buffer fill was 100% Fixating... Fixating time: 20.749s BURN-Free was never needed. /usr/bin/wodim: fifo had 11385 puts and 11385 gets. /usr/bin/wodim: fifo was 0 times empty and 11181 times full, min fill was 95%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=8 -dao driveropts=burnfree -eject -data -tsize=352928s -
Comment