Announcement

Collapse
No announcement yet.

k3b compiling trouble

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    k3b compiling trouble

    Hi, I've been trying to get k3b to rip and encode dvd's. So far I have been unable to get the k3b that came with kubuntu to rip anything. When trying to rip it wouldn't go to the rip menu even though it showed the option in tools and the encode tool isn't there at all. After some investigation I found out that I need to compile k3b with the right dependencies to get it to work.

    This is the first time I have tried to compile anything from source code and I have got stuck trying to work out what I need to get the ffmpeg plugin to install. When I run ./configure and check to see what's missing it says yes to everything except Resmgr support and the ffmpeg decoder plugin.

    I've no idea what Resmgr is or how to install it and can't work out what I need to install for the ffmpeg headers and libraries. Also I couldn't find emovix in the repo's but it doesn't come up as missing in the ./configure output so I don't know about that one either.

    This is what I have installed so far while trying to resolve the dependencies and compile the program, some were already installed, I got the basic list from the k3b site and worked the rest out from the ./configure output with a bit of hunting around the net.

    build-essential
    xorg-dev
    libjpeg62-dev
    libavahi-qt3-dev
    kdelibs4-devmake

    cdrdao
    avifile-mad-plugin
    libmad0-dev
    libdvdread-dev
    cdparanoia
    transcode
    vorbis-tools
    flac
    libflac++-dev
    vcdimager
    normalize
    emovix (not in repo so havn't installed yet)
    sox
    lame
    liblame-dev
    libtagc0-dev
    libhal-dev
    libhal-storage-dev
    dbus-qt-1-dev
    libmusicbrainz4-dev
    libmpcdec-dev
    ffmpeg ?

    This is the output from ./configure:

    config.status: executing depfiles commands

    K3b - Include libdvdread (Video DVD ripping) support:
    K3b - yes

    K3b - Resmgr support: no

    K3b - Compile HAL support yes

    K3b - Audioplayer available (alsa) yes

    K3b - FFMpeg decoder plugin (decodes wma and others):
    K3b - no
    K3b - You are missing the ffmpeg headers and libraries
    K3b - version 0.4.9 or higher.
    K3b - The ffmpeg audio decoding plugin (decodes wma and
    K3b - others) won't be compiled.

    K3b - FLAC support: yes

    K3b - libsndfile audio decoding support: yes

    K3b - Mp3 decoding support (libmad): yes

    K3b - Musepack support: yes

    K3b - Ogg Vorbis support: yes

    K3b - Lame Mp3 encoder plugin: yes

    K3b - Audio meta data reading with Taglib: yes

    K3b - Audio resampling:
    K3b - using version bundled with K3b

    K3b - Audioplayer available (aRts) yes

    K3b - Compile K3bSetup 2: yes

    K3b - Tag guessing using MusicBrainz yes

    Good - your configure finished. Start make now

    It looks like I'm really close but I don't know where to go from here, If someone could point me in the right direction to the missing dependencies I would really appreciate it thanks.
    Tags: None
    • Top
    • Bottom
    #2
    Re: k3b compiling trouble

    You probably need : ffmpeg, libavutil, libavformat, libavcodec and libswscale.

    I was compiling ffmpegthumbnailer and there:
    checking for FFMPEG... no
    configure: error: +Could not find ffmpeg. Please update PKG_CONFIG_PATH to point at location of ffmpeg pkgconfig files directory.
    => Can't find FFMPEG, but it's installed...
    http://code.google.com/p/ffmpegthumb...es/detail?id=2

    Check is:
    configure.ac

    PKG_CHECK_MODULES( FFMPEG, libavutil libavformat libavcodec libswscale, HAVE_FFMPEG=yes,

    So, after installation:
    checking for FFMPEG... yes

    And here k3b (./configure) tells:
    K3b - FFMpeg decoder plugin (decodes wma and others):
    K3b - yes


    About k3b bug
    Bug #99448 in k3b (Ubuntu) / k3b 1.0: ripping dvd doesn´t work
    https://bugs.launchpad.net/ubuntu/+s...k3b/+bug/99448
    Before you edit, BACKUP !

    Why there are dead links ?
    1. Thread: Please explain how to access old kubuntu forum posts
    2. Thread: Lost Information
    • Top
    • Bottom

    Comment

      #3
      Re: k3b compiling trouble

      Thanks for the advice and links, ./configure now shows ffmpeg as a yes. That only leaves Resmgr as showing no. I tried compiling with what I have so far and I now have the rip menu showing up and can choose the settings and start the rip. Only problem is it doesn't seem to do anything after that. The hard drive and dvd lights are on but nothing happens it just stays on 0%.

      If I look in k3b settings/configure k3b/programs everything is ticked except eMovix and normalize. I checked normalize in adept and found a file called normalize-audio, I thought that was the right file but it was already installed. After a bit of searching on the net I found this thread with a fix for getting k3b to find normalize and it seems to have worked.

      http://ubuntuforums.org/showthread.php?t=30763

      I also found this post which showed how to fix the emovix bit too,

      https://bugs.launchpad.net/ubuntu/+s...k3b/+bug/45026

      Still no luck ripping dvd's though and I still can't see the encode option in the tools menu. here is the debug output for the rip after I cancelled it, about 10 mins in and still on 0% stuck on resizing the video:

      System
      -----------------------
      K3b Version: 1.0.4

      KDE Version: 3.5.8
      QT Version: 3.3.7
      Kernel: 2.6.22-14-generic
      Devices
      -----------------------
      _NEC DVD_RW ND-3520A 1.04 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]

      Used versions
      -----------------------
      transcode: 1.0.2

      transcode
      -----------------------
      transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
      (dvd_reader.c) DVD title 1/6: 35 chapter(s), 1 angle(s), title set 1
      (dvd_reader.c) title playback time: 02:15:51.06 8152 sec
      (dvd_reader.c) [Chapter 01] 00:00:00.000 , block from 3648 to 32037
      (dvd_reader.c) [Chapter 02] 00:01:32.080 , block from 32038 to 137109
      (dvd_reader.c) [Chapter 03] 00:06:15.920 , block from 137110 to 267380
      (dvd_reader.c) [Chapter 04] 00:12:10.640 , block from 267381 to 308727
      (dvd_reader.c) [Chapter 05] 00:14:11.920 , block from 308728 to 336019
      (dvd_reader.c) [Chapter 06] 00:15:28.640 , block from 336020 to 397239
      (dvd_reader.c) [Chapter 07] 00:18:05.760 , block from 397240 to 492989
      (dvd_reader.c) [Chapter 08] 00:22:47.760 , block from 492990 to 604286
      (dvd_reader.c) [Chapter 09] 00:27:35.880 , block from 604287 to 655740
      (dvd_reader.c) [Chapter 10] 00:30:00.760 , block from 655741 to 837223
      (dvd_reader.c) [Chapter 11] 00:37:10.640 , block from 837224 to 957298
      (dvd_reader.c) [Chapter 12] 00:42:51.800 , block from 957299 to 1014290
      (dvd_reader.c) [Chapter 13] 00:45:36.640 , block from 1014291 to 1054585
      (dvd_reader.c) [Chapter 14] 00:47:33.800 , block from 1054586 to 1133627
      (dvd_reader.c) [Chapter 15] 00:51:27.400 , block from 1133628 to 1208305
      (dvd_reader.c) [Chapter 16] 00:55:03.080 , block from 1208306 to 1298438
      (dvd_reader.c) [Chapter 17] 00:58:48.920 , block from 1298439 to 1343080
      (dvd_reader.c) [Chapter 18] 01:00:43.960 , block from 1343081 to 1423790
      (dvd_reader.c) [Chapter 19] 01:04:21.760 , block from 1423791 to 1516849
      (dvd_reader.c) [Chapter 20] 01:08:52.840 , block from 1516850 to 1598157
      (dvd_reader.c) [Chapter 21] 01:15:51.520 , block from 1598158 to 1663807
      (dvd_reader.c) [Chapter 22] 01:19:03.280 , block from 1663808 to 1730399
      (dvd_reader.c) [Chapter 23] 01:23:50.280 , block from 1730400 to 1842675
      (dvd_reader.c) [Chapter 24] 01:26:27.600 , block from 1842676 to 1900047
      (dvd_reader.c) [Chapter 25] 01:30:23.240 , block from 1900048 to 1979138
      (dvd_reader.c) [Chapter 26] 01:32:55.080 , block from 1979139 to 2030364
      (dvd_reader.c) [Chapter 27] 01:38:08.800 , block from 2030365 to 2136721
      (dvd_reader.c) [Chapter 28] 01:41:16.720 , block from 2136722 to 2201442
      (dvd_reader.c) [Chapter 29] 01:45:29.200 , block from 2201443 to 2296836
      (dvd_reader.c) [Chapter 30] 01:50:45.360 , block from 2296837 to 2415795
      (dvd_reader.c) [Chapter 31] 01:55:08.240 , block from 2415796 to 2505796
      (dvd_reader.c) [Chapter 32] 01:58:09.080 , block from 2505797 to 2568465
      (dvd_reader.c) [Chapter 33] 02:00:48.800 , block from 2568466 to 2623845
      (dvd_reader.c) [Chapter 34] 02:03:22.640 , block from 2623846 to 2682105
      (dvd_reader.c) [Chapter 35] 02:04:24.440 , block from 2682106 to 2707923
      tc_memcpy: using sse for memcpy
      [import_dvd.so] v0.4.0 (2003-10-02) (video) DVD | (audio) MPEG/AC3/PCM
      [transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
      [transcode] auto-probing source /dev/scd0 (ok)
      [transcode] V: import format | MPEG-2 DVD PAL (V=dvd|A=dvd)
      [transcode] V: AV demux/sync | (1) sync AV at initial MPEG sequence
      [transcode] V: import frame | 720x576 1.25:1 encoded @ 16:9
      [transcode] V: clip frame (<-) | 720x576
      [transcode] V: zoom | 640x352 1.82:1 (Lanczos3)
      [transcode] V: bits/pixel | 0.213
      [transcode] V: decoding fps,frc | 25.000,3
      [transcode] V: multi-pass | (mode=1) writing data (pass 1) to /tmp/kde-chris/k3b_0.log
      [transcode] V: Y'CbCr | YV12/I420
      [transcode] A: import format | 0x2000 AC3 [48000,16,2]
      [transcode] A: export | disabled
      [transcode] V: encoding fps,frc | 25.000,3
      [transcode] A: language | en
      [transcode] A: bytes per frame | 7680 (7680.000000)
      [transcode] A: adjustment | 0@1000
      [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C)
      [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
      [export_ffmpeg.so] v0.3.13 (2004-08-03) (video) Lavc1d.51.38.0 | (audio) MPEG/AC3/PCM
      [transcode] V: video buffer | 10 @ 720x576
      [import_dvd.so] tccat -T 1,-1,1 -i "/dev/scd0" -t dvd -d 0 -L | tcdemux -a 0 -x ac3 -S 0 -M 1 -d 0 | tcextract -t vob -x ac3 -a 0 -d 0 | tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
      [import_dvd.so] tccat -T 1,-1,1 -i "/dev/scd0" -t dvd -d 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
      [import_dvd.so] delaying DVD access by 3 second(s)
      .
      tc_memcpy: using sse for memcpy
      .
      .
      [export_ffmpeg.so] Using FFMPEG codec 'mpeg4' (FourCC 'DIVX', MPEG4 compliant video).
      [export_ffmpeg.so]: WARNING: Interlacing parameters unknown, use --encode_fields
      [export_ffmpeg.so]: INFO: No profile selected
      [export_ffmpeg.so] Neither './ffmpeg.cfg' nor '~/.transcode/ffmpeg.cfg'
      [export_ffmpeg.so] found. Default settings will be used instead.
      [export_ffmpeg.so]: INFO: Starting 1 thread(s)
      [export_ffmpeg.so]: INFO: Set display aspect ratio to input
      [mpeg4 @ 0xb5188a68]removing common factors from framerate
      tc_memcpy: using sse for memcpy
      [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
      [decode_mpeg2.c] libmpeg2 acceleration: mmxext
      [transcode] (sighandler) SIGTERM received
      [transcode] encoded 23033 frames (0 dropped, 0 cloned), clip length 921.32 s
      clean up | frame threads | unload modules | cancel signal | internal threads | done

      transcode command:
      -----------------------
      /usr/bin/transcode --nice 19 --print_status 0 -i /dev/scd0 -x dvd -T 1,-1,1 -a 0 -j 0,0,0,0 -R 1,/tmp/kde-chris/k3b_0.log -y ffmpeg,null -o /dev/null -F mpeg4 -w 1200 -Z 640x352


      All thats left really is the Resmgr showing no when I compiled, its the only thing showing up as no so I'm presuming thats got to be sorted out before the compile, a missing dependency of some sort. I'm not having much luck finding it, but I feel like I have got a lot closer to getting it all sorted out.

      Thanks again for the help so far, I'll keep looking for the missing dependency but if anyone knows the answer I would really appreciate a kick in the right direction
      • Top
      • Bottom

      Comment

        #4
        Re: k3b compiling trouble

        I tried to rip with k3b and here it is working. Tested with short clip (13 s). ->



        Result was 2,6 M avi (xvid):
        Video
        Codec XVID
        Resolution 1008x576
        Frame rate 25.00

        Sound
        Codec mpga
        Sample rate: 48 kHz
        Bitrate: 128 kb/s

        About resmgrt:

        Debian Bug report logs - #362818
        k3b: please disable resmgr support; security issues in resmgr, asked for removal
        http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=362818


        I compiled without resmgr support. .deb is here: http://www.reggle.com/31754237


        Note
        There is overlapping with libk3b2 => error
        trying to overwrite `/usr/lib/libk3bdevice.la', which is also in package libk3b2
        Force warning / using force / man dpkg :
        --force-things | --no-force-things | --refuse-things

        Force or refuse (no-force and refuse mean the same thing)
        to do some things. things is a comma separated list of
        things specified below. --force-help displays a message
        describing them. Things marked with (*) are forced by
        default.

        Warning: These options are mostly intended to be used by
        experts only. Using them without fully understanding
        their effects may break your whole system.

        all: Turns on (or off) all force options.
        => installing with command:
        Code:
        sudo dpkg -i --force-all k3b_1.0.4-1_i386.deb


        There is this "k3b rip dvd not doing anything?"
        http://www.howtogeek.com/forum/topic...doing-anything

        I was trying out k3b after reading this thread and I noticed there is a rip dvd function, but it doesn't seem to do anything on my computer.

        Anybody know if there's a missing package i need or something?

        I think that happens when the DVD you are trying to rip is encrypted. Try starting k3b from the terminal and then select the ripping option, the error message should pop-up in your terminal.
        Maybe k3b with konsole tells something ?
        Before you edit, BACKUP !

        Why there are dead links ?
        1. Thread: Please explain how to access old kubuntu forum posts
        2. Thread: Lost Information
        • Top
        • Bottom

        Comment

          #5
          Re: k3b compiling trouble

          To deal with encrypted DVDs (which is virtually every commercially sold one) you need libdvdcss.
          Also, if you have stuff installed but ./configure says it's not there, check you have also installed any relevant "-dev" packages.
          I am running Ubuntu 8.10 (yes Gnome) with upgrades applied daily about 0900 UK time. Hardware is Dell Precision 420, 2x 800 MHz PIII, 512 MB RDRAM, nVidia GeForce 6800 128 MB AGP graphics, 18GB SCSI and 500GB IDE HDDs, DVD burner, Hauppage TV card.
          • Top
          • Bottom

          Comment

            #6
            Re: k3b compiling trouble

            Hi, not sure what I'm doing wrong still. Several reinstalls later and I still can't get this to work. All I have done this time is install kubuntu get kaffeine to play dvd's installed firefox and setup flash/java. I will try to put down everything I tried in order in case I have missed anything.

            First of all I installed libdvdread-dev then I tried,

            Code:
            sudo apt-get source --compile k3b
            That then told me I needed these dependencies to compile,

            dpkg-dev
            libdvdread-dev
            kdelibs4-dev
            libflac++-dev
            libdbus-qt-1-dev
            libhal-dev
            libhal-storage-dev
            libpopt-dev
            libavformat-dev
            libavcodec-dev
            libqt3-compat-headers
            flac
            libmpcdec-dev
            libtag1-dev
            libmusicbrainz4-dev
            libmad0-dev
            debhelper
            cdbs
            chrpath
            g++



            So I installed all of those and then tried it again and it started compiling. I also installed,

            sox
            transcode
            vcdimager
            emovix (downloaded the deb)
            normalize-audio (I used the fix http://ubuntuforums.org/showthread.php?t=30763 to get k3b to recognise it)


            When it was done I used this command to install the deb that it had just made,

            Code:
            sudo dpkg -i --force-all k3b_1.0.4-2ubuntu1~gutsy1_i386.deb
            After doing this k3b stops responding, when I launch it from the console I get this:

            Code:
            chris@Komputer:~$ k3b
kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 136
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 132
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 8
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
(K3bDevice::Device) /dev/scd0 : 2770 KB/s
(K3bDevice::Device) /dev/scd0 : 1385 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 22160
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DVD_RW ND-3520A
Devices:
------------------------------
Blockdevice:  /dev/scd0
Generic device:
Vendor:     _NEC
Description:  DVD_RW ND-3520A
Version:    1.04
Write speed:  3324
Profiles:    DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:    DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:   DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/scd0
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 3684:34:50 (LBA 16580600) (33957068800 Bytes)
Last sec layer 1: 426:32:71 (LBA 1919471) (3931076608 Bytes)
Layer 1 length: 382:51:39 (LBA 1722864) (3528425472 Bytes)
Layer 2 length: 3258:01:54 (LBA 14661129) (30025992192 Bytes)
(K3bDevice::Device) READ CAPACITY: 765:42:70 other capacity: 00:00:00
DiskInfo:
Mediatype:    DVD-ROM
Current Profile: DVD-ROM
Disk state:   complete
Empty:      0
Rewritable:   0
Appendable:   0
Sessions:    1
Tracks:     1
Layers:     2
Capacity:    765:42:71 (LBA 3445721) (7056836608 Bytes)
Remaining size: 00:00:00 (LBA 0) (0 Bytes)
Used Size:    765:42:71 (LBA 3445721) (7056836608 Bytes)
k3b: symbol lookup error: k3b: undefined symbol: _ZN11K3bVideoDVD8VideoDVDC1Ev
ERROR: Communication problem with k3b, it probably crashed.
chris@Komputer:~$
            Adept tells me that there is an upgrade for k3b after the install and if I install it k3b works again but I'm back to not being able to rip, I presume it just overwrites the install I just did with the version in the repo's

            Next thing I tried was downloading the deb that you made and running it with this command,

            Code:
            sudo dpkg -i --force-all k3b_1.0.4-1_i386.deb
            Now when I try to rip with k3b I have the same problem I had with my first go at compiling, I can start the rip but it doesn't get off 0%, here is the console output:

            Code:
            kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
k3b: (K3bCdrecordProgram) could not start /opt/schily/bin
k3b: (K3bMkisofsProgram) could not start /opt/schily/bin
k3b: (K3bExternalBinManager) Cdrecord 1.1.6 features: wodim, gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi, short-track-raw, audio-stdin, burnfree
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 136
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 132
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 8
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
(K3bDevice::Device) /dev/scd0 : 2770 KB/s
(K3bDevice::Device) /dev/scd0 : 1385 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 22160
k3b: [void K3bMediaCache::clearDeviceList()]
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DVD_RW ND-3520A
k3b: (K3bCdrecordProgram) could not start /opt/schily/bin
k3b: (K3bMkisofsProgram) could not start /opt/schily/bin
k3b: (K3bExternalBinManager) Cdrecord 1.1.6 features: wodim, gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi, short-track-raw, audio-stdin, burnfree
Devices:
------------------------------
Blockdevice:  /dev/scd0
Generic device:
Vendor:     _NEC
Description:  DVD_RW ND-3520A
Version:    1.04
Write speed:  3324
Profiles:    DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:    DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:   DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/scd0
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 3684:34:50 (LBA 16580600) (33957068800 Bytes)
Last sec layer 1: 426:32:71 (LBA 1919471) (3931076608 Bytes)
Layer 1 length: 382:51:39 (LBA 1722864) (3528425472 Bytes)
Layer 2 length: 3258:01:54 (LBA 14661129) (30025992192 Bytes)
(K3bDevice::Device) READ CAPACITY: 765:42:70 other capacity: 00:00:00
k3b: (K3bMedium) found medium:
k3b: =====================================================
DiskInfo:
Mediatype:    DVD-ROM
Current Profile: DVD-ROM
Disk state:   complete
Empty:      0
Rewritable:   0
Appendable:   0
Sessions:    1
Tracks:     1
Layers:     2
Capacity:    765:42:71 (LBA 3445721) (7056836608 Bytes)
Remaining size: 00:00:00 (LBA 0) (0 Bytes)
Used Size:    765:42:71 (LBA 3445721) (7056836608 Bytes)
k3b: =====================================================
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: (K3bServiceInstaller) service menu /home/chris/.kde/share/apps/konqueror/servicemenus/k3b_create_audio_cd.desktop does not exist.
chris@Komputer:~$ k3b: (K3bMedium) found volume id from start sector 0: 'HARRY_POTTER_PHILOSOPHERS_STON'
k3b: kernel version: 2.6.22-14-generic
k3b: (K3bCore) System problems:
k3b: CRITICAL
k3b: PROBLEM: cdrecord will be run without root privileges
k3b: DETAILS: It is highly recommended to configure cdrecord to run with root privileges. Only then cdrecord runs with high priority which increases the overall stability of the burning process. Apart from that it allows changing the size of the used burning buffer. A lot of user problems could be solved this way. This is also true when using SuSE's resmgr.
k3b: SOLUTION:
k3b:
k3b: CRITICAL
k3b: PROBLEM: cdrdao will be run without root privileges
k3b: DETAILS: It is highly recommended to configure cdrdao to run with root privileges to increase the overall stability of the burning process.
k3b: SOLUTION:
k3b:
passprompt


kbuildsycoca running...

Reusing existing ksycoca

DCOP Cleaning up dead connections.

kcmshell: (K3bCdrecordProgram) could not start /opt/schily/bin

kcmshell: (K3bExternalBinManager) Cdrecord 1.1.6 features: wodim, gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi, short-track-raw, audio-stdin, burnfree

/dev/sr0 resolved to /dev/scd0

/dev/scd0 is block device (0)

/dev/scd0 seems to be cdrom

bus: 1, id: 0, lun: 0

(K3bDevice::Device) /dev/scd0: init()

(K3bDevice::Device) /dev/scd0 feature: CD Mastering

(K3bDevice::Device) /dev/scd0 feature: CD Track At Once

(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support

(K3bDevice::Device) /dev/scd0 feature: DVD+R

(K3bDevice::Device) /dev/scd0 feature: DVD+RW

(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer

(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write

(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite

(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0
: checking for TAO

(K3bDevice::Device) /dev/scd0: checking for SAO

(K3bDevice::Device) /dev/scd0: checking for SAO_R96P

(K3bDevice::Device) /dev/scd0: checking for SAO_R96R

(K3bDevice::Device) /dev/scd0: checking for RAW_R16

(K3bDevice::Device) /dev/scd0: checking for RAW_R96P

(K3bDevice::Device) /dev/scd0: checking for RAW_R96R

(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 136

(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 132

(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 8
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
(K3bDevice::Device) /dev/scd0 : 2770 KB/s
(K3bDevice::Device) /dev/scd0 : 1385 KB/s

(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 22160

/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found

(K3bDevice::DeviceManager) SCANNING FOR GENERIC DEVICES.
bus: 1, id: 0, lun: 0
bus: 3, id: 0, lun: 0

bus: 3, id: 1, lun: 0
bus: 4, id: 0, lun: 0

Could not resolve /dev/sg4
(K3bDevice::Device) could not open device /dev/sg4 for reading
          (No such file or directory)

Could not resolve /dev/sg5
(K3bDevice::Device) could not open device /dev/sg5 for reading
          (No such file or directory)
Could not resolve /dev/sg6
(K3bDevice::Device) could not open device /dev/sg6 for reading
          (No such file or directory)
Could not resolve /dev/sg7

(K3bDevice::Device) could not open device /dev/sg7 for reading
          (No such file or directory)
Could not resolve /dev/sg8
(K3bDevice::Device) could not open device /dev/sg8 for reading
          (No such file or directory)
Could not resolve /dev/sg9
(K3bDevice::Device) could not open device /dev/sg9 for reading
          (No such file or directory)
Could not resolve /dev/sg10
(K3bDevice::Device) could not open device /dev/sg10 for reading
          (No such file or directory)
Could not resolve /dev/sg11
(K3bDevice::Device) could not open device /dev/sg11
 for reading
          (No such file or directory)
Could not resolve /dev/sg12
(K3bDevice::Device) could not open device /dev/sg12 for reading
          (No such file or directory)
Could not resolve /dev/sg13
(K3bDevice::Device) could not open device /dev/sg13 for reading
          (No such file or directory)
Could not resolve /dev/sg14
(K3bDevice::Device) could not open device /dev/sg14 for reading
          (No such file or directory)
Could not resolve /dev/sg15
(K3bDevice::Device) could not open device /dev/sg15 for reading
          (No such file or directory)

kcmshell: (K3bCdrecordProgram) could not start /opt/schily/bin

kdecore (KProcess): WARNING: _attachPty() 11

kcmshell: (K3bExternalBinManager) Cdrecord 1.1.6 features: wodim, gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi, short-track-raw, audio-stdin, burnfree

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic

kcmshell: kernel version: 2.6.22-14-generic
kcmshell: kernel version: 2.6.22-14-generic

k3b: (K3b::cutToWidth) not able to cut text to 1!
k3b: (K3bVideoDVDRippingPreview) reading from file /tmp/kde-chris/k3bfDKX8f/000000.ppm
k3b: (K3bVideoDVDRippingPreview) reading from file /tmp/kde-chris/k3bWpI7Fi/000000.ppm
k3b: (K3bVideoDVDRippingPreview) reading from file /tmp/kde-chris/k3bdqD3jC/000000.ppm
k3b: (K3bVideoDVDRippingPreview) reading from file /tmp/kde-chris/k3byImVGc/000000.ppm
k3b: (K3bVideoDVDRippingPreview) reading from file /tmp/kde-chris/k3bdkchJZ/000000.ppm
k3b: kernel version: 2.6.22-14-generic
k3b: ***** transcode parameters:
k3b: /usr/bin/transcode --nice 19 --print_status 0 -i /dev/scd0 -x dvd -T 1,-1,1 -a 0 -j 0,0,0,0 -R 1,/tmp/kde-chris/k3b_0.log -y ffmpeg,null -o /dev/null -F mpeg4 -w 1200 -Z 640x352 k3b:
k3b: (K3bProcess) found unfinished line: '(dvd_reader.c) title playback time: '
k3b: (K3bProcess)       last char: ' '
k3b: (K3bProcess)      joined line: '(dvd_reader.c) title playback time: 02:26:07.03'
k3b: (K3bProcess) found unfinished line: '(dvd_reader.c) title playback time: 02:26:07.03'
k3b: (K3bProcess)       last char: '3'
k3b: (K3bProcess)      joined line: '(dvd_reader.c) title playback time: 02:26:07.03 8768 sec'
k3b: (K3bProcess) found unfinished line: '[transcode] V: video buffer '
k3b: (K3bProcess)       last char: ' '
k3b: (K3bProcess)      joined line: '[transcode] V: video buffer   | 10 @ 720x576'
k3b: (K3bProcess) found unfinished line: '[decode_mpeg2.c] libmpeg2 acceleration: '
k3b: (K3bProcess)       last char: ' '
k3b: (K3bProcess)      joined line: '[decode_mpeg2.c] libmpeg2 acceleration: mmxext'
k3b: (K3bProcess) found unfinished line: '[mpeg4 @ 0xb5175ac8]'
k3b: (K3bProcess)       last char: ']'
k3b: (K3bProcess)      joined line: '[mpeg4 @ 0xb5175ac8]removing common factors from framerate'

Adept tells me again that there is an upgrade for k3b so I tried that again. now k3b won't run at all and gives this error message in the console,

chris@Komputer:~$ k3b
k3b: error while loading shared libraries: libk3bdevice.so.5: cannot open shared object file: No such file or directory
            • Top
            • Bottom

            Comment

              #7
              Re: k3b compiling trouble

              After doing this while I was scratching my head I noticed that the k3b deb wasn't the only deb made by my earlier attempts while using

              Code:
              sudo apt-get source --compile k3b
              There was also

              libk3b2_1.0.4-2ubuntu1~gutsy1_i386
              libk3b2-extracodecs_1.0.4-2ubuntu1~gutsy1_i386
              libk3b-dev_1.0.4-2ubuntu1~gutsy1_i386

              as well as

              k3b_1.0.4-2ubuntu1~gutsy1_i386

              So I removed k3b and tried installing all of those. This time I could start the rip process but again I was stuck on 0%. Here is the output from the console:

              Code:
              kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_RW_ND_3520A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 136
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 132
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET PERFORMANCE: 8
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 8310 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::Device) /dev/scd0 : 3324 KB/s
(K3bDevice::Device) /dev/scd0 : 2770 KB/s
(K3bDevice::Device) /dev/scd0 : 1385 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 22160
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DVD_RW ND-3520A
Devices:
------------------------------
Blockdevice:  /dev/scd0
Generic device:
Vendor:     _NEC
Description:  DVD_RW ND-3520A
Version:    1.04
Write speed:  3324
Profiles:    DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:    DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:   DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/scd0
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 3684:34:50 (LBA 16580600) (33957068800 Bytes)
Last sec layer 1: 426:32:71 (LBA 1919471) (3931076608 Bytes)
Layer 1 length: 382:51:39 (LBA 1722864) (3528425472 Bytes)
Layer 2 length: 3258:01:54 (LBA 14661129) (30025992192 Bytes)
(K3bDevice::Device) READ CAPACITY: 765:42:70 other capacity: 00:00:00
DiskInfo:
Mediatype:    DVD-ROM
Current Profile: DVD-ROM
Disk state:   complete
Empty:      0
Rewritable:   0
Appendable:   0
Sessions:    1
Tracks:     1
Layers:     2
Capacity:    765:42:71 (LBA 3445721) (7056836608 Bytes)
Remaining size: 00:00:00 (LBA 0) (0 Bytes)
Used Size:    765:42:71 (LBA 3445721) (7056836608 Bytes)
chris@Komputer:~$
              Again adept tells me that k3b has an upgrade and also this time so do the other debs that I installed. Not much surprise when I apply the updates I seem to be back to square one. k3b works but nothing happens when I try to rip a dvd.

              I seem to be going round in circles but on the bright side I have learnt a lot about compiling, debs and dependencies too. Thanks again for all the help so far I would have quit already without it and I hope this post makes more sense to you than it did to me

              Edit : Also don't know what happened to the size of my posts, i thought the code quotes would have made things smaller and given the code scroll bars, sorry about that.
              • Top
              • Bottom

              Comment

                #8
                Re: k3b compiling trouble

                Error #1:
                k3b: symbol lookup error: k3b: undefined symbol: _ZN11K3bVideoDVD8VideoDVDC1Ev
                ERROR: Communication problem with k3b, it probably crashed.
                As you noticed:
                There was also

                libk3b2_1.0.4-2ubuntu1~gutsy1_i386
                libk3b2-extracodecs_1.0.4-2ubuntu1~gutsy1_i386
                libk3b-dev_1.0.4-2ubuntu1~gutsy1_i386

                as well as

                k3b_1.0.4-2ubuntu1~gutsy1_i386

                Error #2
                k3b: kernel version: 2.6.22-14-generic
                k3b: (K3bCore) System problems:
                k3b: CRITICAL
                k3b: PROBLEM: cdrecord will be run without root privileges

                I compiled single package: everything is in the same package. And there is (should be) k3bsetup:
                K3bSetup 2 - modify permission for CD/DVD burning with K3b
                It is removed from the official repo package. It should be in the K > System > K3bSetup

                My permissions:
                HL-DT-ST DVDRAM GSA-4165B /dev/hdc 660 root.cdrom

                program version path rights
                cdrao 1.2.2 /usr/bin/cdrdao 4711 root.root
                cdrao 1.2.2 /usr/X11R6/bin/cdrdao 4711 root.root
                cdrecord 1.1.6 /usr/bin/wodim 4711 root.root
                cdrecord 1.1.6 /usr/X11R6/bin/wodim 4711 root.root
                growisof 7.0.1 /usr/bin/growisof 0755 root.root
                growisof 7.0.1 /usr/X11R6/bin/growisof 0755 root.root

                Adept tells me that there is an upgrade for k3b after the install and if I install it k3b works again but I'm back to not being able to rip, I presume it just overwrites the install I just did with the version in the repo's
                and
                Again adept tells me that k3b has an upgrade and also this time so do the other debs that I installed. Not much surprise when I apply the updates I seem to be back to square one. k3b works but nothing happens when I try to rip a dvd.
                Yes, it will upgrade to the repo version (and it doesn't have rip enabled). Pinning version
                http://kubuntuforums.net/forums/inde...9271#msg109271


                Also don't know what happened to the size of my posts, i thought the code quotes would have made things smaller and given the code scroll bars, sorry about that.
                "quote" and "code" do that. When you have long lines/long quotes it is better to use " Additional Options" -> "Attach" text files.


                I noticed that your transcode do have only one line. I think that it should have two lines. Example report.txt. You could take those transcode lines and run them as bash script, without k3b. Example go.txt.


                Ripping tools:

                AcidRip
                http://untrepid.com/acidrip/
                + it is in the repos

                dvd::rip
                http://exit1.org/dvdrip/
                + it is in the repos

                DVD Rip-O-Matic
                http://www.kde-apps.org/content/show...?content=21455
                + it is kommander script /1/

                QuickRip
                http://www.kde-apps.org/content/show...p?content=9706


                /1/ Kommander
                visual dialog builder and executor tool
                Kommander is a visual dialog building tool whose primary objective is
                to create as much functionality as possible without using any scripting
                language.

                More specifically, Kommander is a set of tools that allow you to create
                dynamic GUI dialogs that generate, based on their state, a piece of
                text. The piece of text can be a command line to a program, any piece
                of code, business documents that contain a lot of repetitious or
                templated text and so on.

                The resulting generated text can then be executed as a command line
                program (hence the name "Kommander"), written to a file, passed to a
                script for extended processing, and literally anything else you can
                think of. And you aren't required to write a single line of code!

                As well as building dialogs, Kommander may be expanded to create full
                mainwindow applications.

                This package is part of KDE, as a component of the KDE web development module.
                See the 'kde' and 'kdewebdev' packages for more information.
                Attached Files
                Before you edit, BACKUP !

                Why there are dead links ?
                1. Thread: Please explain how to access old kubuntu forum posts
                2. Thread: Lost Information
                • Top
                • Bottom

                Comment

                Previous template Next
                Working...
                X