When I open mythtv, mplayer, totem the video playback is very distorted. It is mainly pink has lines running everywhere and is completely unwatchable. I can hear the audio in the background fast forward and all.
I noticed if I continue to open mplayer close open a few of them close just basically random click stuff eventually it will load up properly. I have been doing this with mplayer until it displays video then I load up mythtv and all is fine. Until I want to watch a video later.
Any ideas for me? Thank you all.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 1024 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Generic CRT Display"
ModelName "Monitor 1024x768"
HorizSync 31.5 - 61.0
VertRefresh 50.0 - 75.0
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
VendorName "Unknown"
ModelName "S@@ SHINCO LCD TV"
HorizSync 44.0 - 51.0
VertRefresh 47.0 - 63.0
Gamma 1
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ENVISIONEN-910e"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7600 GT]"
Driver "nvidia"
BoardName "nv"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "UseDisplayDevice" "CRT-1"
BusID "PCI:7:0:0"
Screen 0
EndSection
Section "Device"
#
Identifier "device1"
Driver "nv"
BoardName "nv"
BusID "PCI:7:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:7:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1280x960@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
#
# Removed Option "metamodes" "nvidia-auto-select +0+0"
# Removed Option "metamodes" "1024x768_60 +0+0"
Identifier "screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1024x768 +0+0"
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT-1: 1024x768@75 +0+0; CRT-1: 1024x768@70 +0+0; CRT-1: 832x624@75 +0+0; CRT-1: 1024x768@60 +0+0; CRT-1: 800x600@60 +0+0; CRT-1: 800x600@75 +0+0; CRT-1: 800x600@72 +0+0; CRT-1: 800x600@56 +0+0; CRT-1: 640x480@75 +0+0; CRT-1: 640x480@72 +0+0; CRT-1: 640x480@60 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: nvidia-auto-select +0+0"
EndSection
I noticed if I continue to open mplayer close open a few of them close just basically random click stuff eventually it will load up properly. I have been doing this with mplayer until it displays video then I load up mythtv and all is fine. Until I want to watch a video later.
Any ideas for me? Thank you all.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 1024 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Generic CRT Display"
ModelName "Monitor 1024x768"
HorizSync 31.5 - 61.0
VertRefresh 50.0 - 75.0
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
VendorName "Unknown"
ModelName "S@@ SHINCO LCD TV"
HorizSync 44.0 - 51.0
VertRefresh 47.0 - 63.0
Gamma 1
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ENVISIONEN-910e"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7600 GT]"
Driver "nvidia"
BoardName "nv"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "UseDisplayDevice" "CRT-1"
BusID "PCI:7:0:0"
Screen 0
EndSection
Section "Device"
#
Identifier "device1"
Driver "nv"
BoardName "nv"
BusID "PCI:7:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:7:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1280x960@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
#
# Removed Option "metamodes" "nvidia-auto-select +0+0"
# Removed Option "metamodes" "1024x768_60 +0+0"
Identifier "screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1024x768 +0+0"
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT-1: 1024x768@75 +0+0; CRT-1: 1024x768@70 +0+0; CRT-1: 832x624@75 +0+0; CRT-1: 1024x768@60 +0+0; CRT-1: 800x600@60 +0+0; CRT-1: 800x600@75 +0+0; CRT-1: 800x600@72 +0+0; CRT-1: 800x600@56 +0+0; CRT-1: 640x480@75 +0+0; CRT-1: 640x480@72 +0+0; CRT-1: 640x480@60 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: nvidia-auto-select +0+0"
EndSection
Comment