I'm moving this from another thread to a new topic to avoid colliisions.
I have this in my /etc/X11/xorg.conf :
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Plug 'n' Play"
ModelName "Plug 'n' Play"
Gamma 1
ModeLine "1280x960@85" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Virtual 1280 960
Depth 24
Modes "1280x960@85"
EndSubSection
EndSection
But everytime X starts I have to run nvidia settings to set the monitor from 60 to 85 hz
[Edit] I also still have the problem that on reboot random resolutions are set, sometimes i can move the mouse to the edges so I'm able to operate the windows, sometimes not. It's a bit frustrating that this problem persists, it makes me doubt the stableness of the stuff while my goal was to move to a more stable os to run amyserver on. I have the idea that all is related to the nividia driver.
[Edit2] using the mode line tool mentioned elswhere in this forum
http://www.bohne-lang.de/spec/linux/modeline/
I was able to generate a modeline which starts up x the way I want, pff.
If this is gonna stick, I'll put a SOLVED in the topic of this thread.
I have this in my /etc/X11/xorg.conf :
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Plug 'n' Play"
ModelName "Plug 'n' Play"
Gamma 1
ModeLine "1280x960@85" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Virtual 1280 960
Depth 24
Modes "1280x960@85"
EndSubSection
EndSection
But everytime X starts I have to run nvidia settings to set the monitor from 60 to 85 hz
[Edit] I also still have the problem that on reboot random resolutions are set, sometimes i can move the mouse to the edges so I'm able to operate the windows, sometimes not. It's a bit frustrating that this problem persists, it makes me doubt the stableness of the stuff while my goal was to move to a more stable os to run amyserver on. I have the idea that all is related to the nividia driver.
[Edit2] using the mode line tool mentioned elswhere in this forum
http://www.bohne-lang.de/spec/linux/modeline/
I was able to generate a modeline which starts up x the way I want, pff.
If this is gonna stick, I'll put a SOLVED in the topic of this thread.