After going through several installs of drivers I have my Samsung Syncmaster 205BW displaying 1680*1050 resolution. However, I seem to be getting this flashing little white line on the left side of my screen. I am assuming that this is due to some referesh rate being off. If I use the Nvidia Settings program it seems to screw things up and the max res that I can get is 1600*1024.
What am I doing wrong?
Here is my xorg.conf file:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "stylus"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "eraser"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "cursor"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
Section "Monitor"
Identifier "SyncMaster 205BW"
HorizSync 30.0 - 81.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA 6600LE"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA 6600LE"
Monitor "SyncMaster 205BW"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TripleBuffer" "true"
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
"
What am I doing wrong?
Here is my xorg.conf file:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "stylus"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "eraser"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
#Section "InputDevice"
# Driver "wacom"
# Identifier "cursor"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection
Section "Monitor"
Identifier "SyncMaster 205BW"
HorizSync 30.0 - 81.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA 6600LE"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA 6600LE"
Monitor "SyncMaster 205BW"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TripleBuffer" "true"
SubSection "Display"
Depth 1
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800
x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
"
Comment