Hello! I had installed the 6.06 when it was released and I wanted to install the last version, the 7.04.
But I wanted to make a clean installation, removing the 6.06 first and then installing the 7.04.
So I did, but when it boots, after selecting the first option (Install, as it is the alternate CD), it gives me two different messages, depending on the situation:
if the mouse is connected (it is a generic PS2 mouse, but it worked perfectly in 6.06):
I get the message:
"22.713929 udevd-event [1516]: run_program '/sbin/modprobe' abnormal exit
"<6> input: PS/2 Generic Mouse as /class/input/input2
And nothing else happens.
if the mouse is not connected:
I get the message:
"Trying to enable the frame buffer."
And nothing else happens.
The memory modules are both OK (ran memtest for a long time, no errors reported)
I would really like to install this version, but I couldn't do it.
The md5 are all right, and to make sure, I downloaded it again from another mirror, but the same problem happend.
My computer (not the best one, but hey, i live in Brazil...)
Pentium 4 1,7GHz
Asus P4SDR-VM
768 MB RAM (PC-133)
Seagate 40GB
Pioneer DVR-110D DVD Burner
LG 4480B Combo Drive
PCI: I have 1 PCI-to-USB board (chipset: VIA), a sound card and a dial-up modem (even though I rarely use it).
The graphics card is integrated, a SiS 650GL
I believe that everything else is not necessary to be posted
Does anyone have any suggestion?
But I wanted to make a clean installation, removing the 6.06 first and then installing the 7.04.
So I did, but when it boots, after selecting the first option (Install, as it is the alternate CD), it gives me two different messages, depending on the situation:
if the mouse is connected (it is a generic PS2 mouse, but it worked perfectly in 6.06):
I get the message:
"22.713929 udevd-event [1516]: run_program '/sbin/modprobe' abnormal exit
"<6> input: PS/2 Generic Mouse as /class/input/input2
And nothing else happens.
if the mouse is not connected:
I get the message:
"Trying to enable the frame buffer."
And nothing else happens.
The memory modules are both OK (ran memtest for a long time, no errors reported)
I would really like to install this version, but I couldn't do it.
The md5 are all right, and to make sure, I downloaded it again from another mirror, but the same problem happend.
My computer (not the best one, but hey, i live in Brazil...)
Pentium 4 1,7GHz
Asus P4SDR-VM
768 MB RAM (PC-133)
Seagate 40GB
Pioneer DVR-110D DVD Burner
LG 4480B Combo Drive
PCI: I have 1 PCI-to-USB board (chipset: VIA), a sound card and a dial-up modem (even though I rarely use it).
The graphics card is integrated, a SiS 650GL
I believe that everything else is not necessary to be posted
Does anyone have any suggestion?
Comment