connecting bluetooth failed (solved)

[bootdoc]

I cannot get my nokia phone to pair with my computer. The funny thing is that they recognize each other and I can push files to my phone but cannot send files from phone to pc. When i try to connect to the pc I get "connection failed". also when I try to restart bluetooth services in system settings or do :

sudo /etc/init.d/bluetooth restart

I get "failed to connect to sdp server". I have looked all over for a solution but have not found one. I installed bluez-firmware 1.2, bluez-hcidump1.41, bluez-libs-3.26, bluez-utils-3.26 all from source. Tried to install obex-data-server-0.2 but it failed due to dependency on dbus-glib-1.

any ideas??


solution:
Upgraded to gutsy now I can pair with the phone and transfer files back and forth

[bootdoc]

Re: connecting bluetooth failed

I am still having trouble pairing my phone (nokia 6103b) with my computer. I have installed the latest bluez pkgs from source. When I open kbluetoothd file transfer, I can see my phone in the window. I click on the phone and it shows all the services. I then click on OBEX file transfer icon and my asks if I want to connect with bluez (legend). I hit OK on the phone and key in the passkey, and get
Could not connect to host 00:18:8d:ec:18:39. following is my hcid.conf:

HCId options
options {
# Automatically initialize new devices
autoinit yes;

# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security none;

# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;

# Default PIN code for incoming connections
passkey "1234";
}

# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ (legend)";

# Local device class
class 0x000100;

# Default packet type
pkt_type DH1,DM1,HV1;

# Inquiry and Page scan
iscan enable; pscan enable;

# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;

# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}

here is the last lines of output from hcidump starting from the pin code request.

HCI Event: PIN Code Request (0x16) plen 6
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 20 pf 1 ilen 0 fcs 0x1c
< HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Mode Change (0x14) plen 6
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 20 pf 1 ilen 0 fcs 0x36
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4


and finally the dmesg | tail:

$ dmesg | tail
[998742.427907] usb 1-4: new full speed USB device using ohci_hcd and address 5
[998742.671276] usb 1-4: configuration #1 chosen from 1 choice
[998760.696780] hci_cmd_task: hci0 command tx timeout
[999338.449929] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[1001965.723836] hci_cmd_task: hci0 command tx timeout
[1007275.826288] fuse init (API version 7.8)
[1009632.513960] ip_tables: (C) 2000-2006 Netfilter Core Team
[1009632.684962] Netfilter messages via NETLINK v0.30.
[1009632.697725] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[1009638.051217] Inbound IN=eth1 OUT= MAC=00:16:17:14:ff:c5:00:15:05:04:d3:5e:08:00 SRC=128.121.60.235 DST=192.168.0.100 LEN=53 TOS=0x00 PREC=0x00 TTL=53 ID=5465 DF PROTO=TCP SPT=80 DPT=50757 WINDOW=57920 RES=0x00 ACK URGP=0

[BoeBoe]

Re: connecting bluetooth failed

Same problem here... can send files to phone but not the other way