ATI X200 at HP NX6125 problems with driver after beryl

[Piotral]

I have installed ATI drivers from ATI wiki manual. Everything was working fine till I installed beryl without reading manual. I just did: apt-get install beryl. And now when I do: fglrxinfo I get:

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

Error: unable to open display :0

What does it mean? I think drivers are working still fine. 3D screen savers are ok, but I'd like to have working everything again.

Finally I tried to read wiki manual about beryl and after glxinfo | grep direct I get the message:

Xlib: connection to ":0.0" refused by se[img][/img]rver
Xlib: No protocol specified

Error: unable to open display (null)

[Rog131]

Re: ATI X200 at HP NX6125 problems with driver after beryl

Check xorg-log (/var/log/Xorg.0.log)
Errors / warnings ?

In the konsole:
Errors:

cat /var/log/Xorg.0.log | grep "(EE)"

and warnings

cat /var/log/Xorg.0.log | grep "(WW)"

Links:
Install Beryl on Ubuntu Feisty with XGL
http://wiki.beryl-project.org/wiki/I...eisty_with_XGL

Topic: i want to install Beryl on Kubuntu 7.04 graphic card is ATI x1400
http://kubuntuforums.net/forums/inde...opic=3082628.0

Topic: how do u install ATI drivers?
http://kubuntuforums.net/forums/index.php?topic=3084084

[Piotral]

Re: ATI X200 at HP NX6125 problems with driver after beryl

Thank you for links. I'll try but for your command results are:

$ cat /var/log/Xorg.0.log | grep "(EE)"

(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom

and warnings

$ cat /var/log/Xorg.0.log | grep "(WW)"

(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) fglrx(0): board is an unknown third party board, chipset is supported

So it is not so pink Any idea what to do now before uninstalling drivers and beryl packages?