Announcement

Collapse
No announcement yet.

dwl-g510 (the marvell version) ndiswrapper question

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    dwl-g510 (the marvell version) ndiswrapper question

    Ok so i have some experience with linux (mainly mandriva) but am jumping to kubuntu now and well i need help gettin this network card working - which btw i was able to use thru ndiswrapper in mandriva

    So here's where i have gotten to so far.

    Installed ndiswrapper off of kubuntu cd
    installed .inf file for the card

    however when i type ndiswrapper -l
    i am getting a "mrv8k51 invalid driver!" message

    I have tried all the versions of the .inf file provided in the dwl g510 driver cd (i.e. win2k, win98, winme and winxp) all of them give me the same error message.

    where do i go from here? other than buying a natively supported card....any help would be appreciated

    #2
    Re: dwl-g510 (the marvell version) ndiswrapper question

    so i cleaned out everything pertaining to ndiswrapper i.e.
    Code:
    sudo modprobe -r mrv8k
    sudo rmmod ndiswrapper
    sudo apt-get remove ndiswrapper-utils
    sudo rm -r /etc/ndiswrapper/
    sudo rm -r /etc/modprobe.d/ndiswrapper
    and did a re-install following the directions and NOW...i have this message "mrv8k51 driver present, hardware present" OH YEA!!!

    except that for some reason now wlan0 is not showing up in iwconfig even after i modprobed ndiswrapper!!!

    Comment


      #3
      Re: dwl-g510 (the marvell version) ndiswrapper question

      so here is the output i get when I dmesg - anyone willing to help!!?!?

      [4294696.536000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
      [4294696.583000] ndiswrapper: driver mrv8k51 (D-Link,1/09/2004,2.3.0.1) loaded
      [4294696.583000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 209
      [4294696.584000] ndiswrapper: using irq 209
      [4294696.592000] ndiswrapper (miniport_init:240): couldn't initialize device: C0000001
      [4294696.592000] ndiswrapper (pnp_start_device:479): Windows driver couldn't initialize the device (C0000001)
      [4294696.592000] ndiswrapper (miniport_halt:271): device dfbc0260 is not initialized - not halting
      [4294696.592000] ndiswrapper: device eth%d removed
      [4294696.592000] unregister_netdevice: device eth%d/dfbc0000 never was registered
      [4294696.592000] ACPI: PCI interrupt for device 0000:00:10.0 disabled
      [4294696.592000] ndiswrapper: probe of 0000:00:10.0 failed with error -22

      Comment


        #4
        Re: dwl-g510 (the marvell version) ndiswrapper question

        anyone know where i can get the package for ndiswrapper 0.9 for dapper drake 'cause that's the version the used to work wonderfully on mandriva with this driver....figure i can try that...as my next step in figuring this out

        Comment


          #5
          Re: dwl-g510 (the marvell version) ndiswrapper question

          so i decided to make ndiswrapper 0.9 from source because thats the version that used to work for me on mandriva w/ my cards win2k drivers....

          here's where i am stuck when i do make install - any suggestions

          root@gm-desktop:~/ndis/ndiswrapper-0.9# make install
          make -C driver install
          make[1]: Entering directory `/home/gm/ndis/ndiswrapper-0.9/driver'
          make -C /lib/modules/2.6.15-23-386/build SUBDIRS=/home/gm/ndis/ndiswrapper-0.9/driver DRV_VERSION="0.9" modules
          make[2]: Entering directory `/usr/src/linux-headers-2.6.15-23-386'
          CC [M] /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.o
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:253:36: error: macro "halt" passed 1 arguments, but takes just 0
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c: In function ‘call_halt’:
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:253: warning: statement with no effect
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c: In function ‘ndis_suspend’:
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:867: error: too many arguments to function ‘pci_save_state’
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c: In function ‘ndis_resume’:
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:897: error: too many arguments to function ‘pci_restore_state’
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c: In function ‘ndis_init_one’:
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:1294: error: too many arguments to function ‘pci_restore_state’
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c: In function ‘start_driver’:
          /home/gm/ndis/ndiswrapper-0.9/driver/wrapper.c:1448: warning: assignment from incompatible pointer type
          make[3]: *** [/home/gm/ndis/ndiswrapper-0.9/driver/wrapper.o] Error 1
          make[2]: *** [_module_/home/gm/ndis/ndiswrapper-0.9/driver] Error 2
          make[2]: Leaving directory `/usr/src/linux-headers-2.6.15-23-386'
          make[1]: *** [default] Error 2
          make[1]: Leaving directory `/home/gm/ndis/ndiswrapper-0.9/driver'
          make: *** [install] Error 2

          Comment

          Working...
          X