My brain has turned into toast. I've tried alot of things over the last several hours and still can mount my 2nd hard drive. I need to find a place where I can download a manual on how to do this for Linux. (Kubuntu) My 2nd hard drive would be used only for Linux (as is my primary drive). I need to know what gets edited in fstab,mstab,creating desktop link to the device, change all permissions from 'root' to any 'user' , so that it can be accessed without 'root permission.'
I want to use this drive for digital photo manipulation and stitching panorama's.
I formated and created an ext3 filesystem . . . .on this 2nd drive . . .it would be considered I guess as an 'extended'drive? As my primary drive is my first hard drive?. .. . with a mount point of what?
I need some help with this, it's driving me crazy and need a simple to follow tutorial on how to set this drive up.
I've played around with qtparted, KwickDisk, and even used my 'Partition Commander Windoze disk'. (I think one of my problems is this 'root' permission ' stuff. . .
Device Boot Start End Blocks Id System
/dev/hda1 * 1 5374 43166623+ 83 Linux
/dev/hda2 5375 5605 1855507+ 5 Extend ed
/dev/hda5 5375 5605 1855476 82 Linux swap / Solaris
Disk /dev/hdb: 46.1 GB, 46103371776 bytes
255 heads, 63 sectors/track, 5605 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 5605 45022131 83 Linux
/etc/fstab: static file system information.
proc /proc proc defaults 0 0
/dev/hda1 / ext3 nouser,defaults,errors=remount-ro,atime,auto,rw,dev,exec,suid 0 1
/dev/hda5 none swap sw 0 0
/dev/hdb1 / ext3 users,defaults,errors=remount-ro,atime,auto,rw,dev,exec,suid 0 1
/dev/hdc /media/cdrom0 udf,iso9660 user,atime,noauto,rw,dev,exec,suid 0 0
etc/mtab information:
/dev/hdb1 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
/sys /sys sysfs rw 0 0
varrun /var/run tmpfs rw 0 0
varlock /var/lock tmpfs rw 0 0
procbususb /proc/bus/usb usbfs rw 0 0
udev /dev tmpfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
devshm /dev/shm tmpfs rw 0 0
lrm /lib/modules/2.6.15-26-386/volatile tmpfs rw 0 0
Any help in editing changes that would work would be appreciated. :P
Rich :P
I want to use this drive for digital photo manipulation and stitching panorama's.
I formated and created an ext3 filesystem . . . .on this 2nd drive . . .it would be considered I guess as an 'extended'drive? As my primary drive is my first hard drive?. .. . with a mount point of what?
I need some help with this, it's driving me crazy and need a simple to follow tutorial on how to set this drive up.
I've played around with qtparted, KwickDisk, and even used my 'Partition Commander Windoze disk'. (I think one of my problems is this 'root' permission ' stuff. . .
Device Boot Start End Blocks Id System
/dev/hda1 * 1 5374 43166623+ 83 Linux
/dev/hda2 5375 5605 1855507+ 5 Extend ed
/dev/hda5 5375 5605 1855476 82 Linux swap / Solaris
Disk /dev/hdb: 46.1 GB, 46103371776 bytes
255 heads, 63 sectors/track, 5605 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 5605 45022131 83 Linux
/etc/fstab: static file system information.
proc /proc proc defaults 0 0
/dev/hda1 / ext3 nouser,defaults,errors=remount-ro,atime,auto,rw,dev,exec,suid 0 1
/dev/hda5 none swap sw 0 0
/dev/hdb1 / ext3 users,defaults,errors=remount-ro,atime,auto,rw,dev,exec,suid 0 1
/dev/hdc /media/cdrom0 udf,iso9660 user,atime,noauto,rw,dev,exec,suid 0 0
etc/mtab information:
/dev/hdb1 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
/sys /sys sysfs rw 0 0
varrun /var/run tmpfs rw 0 0
varlock /var/lock tmpfs rw 0 0
procbususb /proc/bus/usb usbfs rw 0 0
udev /dev tmpfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
devshm /dev/shm tmpfs rw 0 0
lrm /lib/modules/2.6.15-26-386/volatile tmpfs rw 0 0
Any help in editing changes that would work would be appreciated. :P
Rich :P
Comment