Super Slow After Logging In

[Guest]

Hi, im having a recurring issue with my install... Most the time(not everytime) after i login my computer will run incredibly slow. Generally when it loads and drags I Ctrl+Alt F1, login in and use startx and generally itll kick back up to pace... But sometimes ill experience the same issue that route also... I cant figure out what the issue is. I thought maybe some of my boot programs were doing it, but this problem persisted after a complete wipe and reinstall...

This is my dmesg.... When the Kubuntu 14.10 loading screen is up the first error shows up below the loading bar, so i figured that's where i should start at.

[Guest]

[ 17.561295] init: Error while reading from descriptor: Broken pipe
[ 17.566404] init: failsafe main process (590) killed by TERM signal
[ 17.914899] nvidia: module license 'NVIDIA' taints kernel.
[ 17.914905] Disabling lock debugging due to kernel taint
[ 17.923645] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 17.929700] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 17.929716] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=nonewns=none
[ 17.929858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.123 Wed Jul 2 10:59:22 PDT 2014
[ 18.307467] audit: type=1400 audit(1417118124.978:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=709 comm="apparmor_parser"
[ 18.307476] audit: type=1400 audit(1417118124.978:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=709 comm="apparmor_parser"
[ 18.308908] audit: type=1400 audit(1417118124.978:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=709 comm="apparmor_parser"
[ 18.308915] audit: type=1400 audit(1417118124.978:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=709 comm="apparmor_parser"
[ 18.470423] cfg80211: Calling CRDA to update world regulatory domain
[ 18.602192] cfg80211: World regulatory domain updated:
[ 18.602196] cfg80211: DFS Master region: unset
[ 18.602198] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.602200] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 18.602202] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 18.602204] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 18.602205] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 18.602207] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 18.602711] usb 1-5: reset high-speed USB device number 4 using ehci-pci
[ 18.745072] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 18.799601] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
[ 18.804585] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.804904] usbcore: registered new interface driver rt2800usb
[ 18.934879] Bluetooth: Core ver 2.19
[ 18.934900] NET: Registered protocol family 31
[ 18.934902] Bluetooth: HCI device and connection manager initialized
[ 18.935122] Bluetooth: HCI socket layer initialized
[ 18.935125] Bluetooth: L2CAP socket layer initialized
[ 18.935140] Bluetooth: SCO socket layer initialized
[ 18.939264] Bluetooth: RFCOMM TTY layer initialized
[ 18.939275] Bluetooth: RFCOMM socket layer initialized
[ 18.939280] Bluetooth: RFCOMM ver 1.11
[ 19.022840] floppy0: no floppy controllers found
[ 19.022854] work still pending
[ 19.077479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.077484] Bluetooth: BNEP filters: protocol multicast
[ 19.077492] Bluetooth: BNEP socket layer initialized
[ 19.287529] init: cups main process (729) killed by HUP signal
[ 19.287540] init: cups main process ended, respawning
[ 19.398898] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[ 19.398972] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 19.399042] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 19.399116] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 19.399186] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 19.966160] systemd-logind[932]: Watching system buttons on /dev/input/event1 (Power Button)
[ 19.966218] systemd-logind[932]: Watching system buttons on /dev/input/event0 (Power Button)
[ 19.966246] systemd-logind[932]: New seat seat0.
[ 20.036910] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 20.061577] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 20.277926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.280396] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 20.280425] forcedeth 0000:00:07.0 eth0: MSI enabled
[ 20.280639] forcedeth 0000:00:07.0 eth0: no link during initialization
[ 20.281043] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.972006] wlan0: authenticate with 00:26:f2:bc:cf:a4
[ 23.007396] wlan0: send auth to 00:26:f2:bc:cf:a4 (try 1/3)
[ 23.009786] wlan0: authenticated
[ 23.013945] wlan0: associate with 00:26:f2:bc:cf:a4 (try 1/3)
[ 23.016296] wlan0: RX AssocResp from 00:26:f2:bc:cf:a4 (capab=0x411 status=0 aid=2)
[ 23.023129] wlan0: associated
[ 23.023170] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.059775] wlan0: deauthenticating from 00:26:f2:bc:cf:a4 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.100300] cfg80211: Calling CRDA to update world regulatory domain
[ 23.100416] wlan0: authenticate with 00:26:f2:bc:cf:a4
[ 23.123669] wlan0: send auth to 00:26:f2:bc:cf:a4 (try 1/3)
[ 23.123867] cfg80211: World regulatory domain updated:
[ 23.123872] cfg80211: DFS Master region: unset
[ 23.123874] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 23.123876] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 23.123878] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 23.123880] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 23.123881] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 23.123883] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 23.125264] wlan0: authenticated
[ 23.125924] wlan0: associate with 00:26:f2:bc:cf:a4 (try 1/3)
[ 23.129526] wlan0: RX AssocResp from 00:26:f2:bc:cf:a4 (capab=0x411 status=0 aid=2)
[ 23.136484] wlan0: associated
[ 30.079137] systemd-logind[932]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[ 30.079147] systemd-logind[932]: Failed to start user service: Unknown unit: user@1000.service
[ 30.084324] systemd-logind[932]: New session 1 of user amnite.
[ 30.084363] systemd-logind[932]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 48.725791] audit_printk_skb: 51 callbacks suppressed
[ 48.725795] audit: type=1400 audit(1417118155.390:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2422 comm="apparmor_parser"
[ 48.725805] audit: type=1400 audit(1417118155.390:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2422 comm="apparmor_parser"
[ 48.754628] audit: type=1400 audit(1417118155.422:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2422 comm="apparmor_parser"
[ 71.693760] systemd-logind[932]: New session c1 of user amnite.