14.04 is slower on brand new laptop than 5 year old laptop

[Stosskraft]

Hello, I am wondering if I am the only one with this issue. I bought a brand new HP 17 laptop (AMD quad core, 1T hard drive and 16 gigs of RAM) and I find that it is noticably slower than my old HP dual core-4 gigs of RAM. Has anyone else experienced this? The new one is much more laggy and takes longer to open programs, it also seems to lock up more.

Should I be using Kubuntu for something so new? Is there any other systems that are recommended? I am running the 64bit Kubuntu 14.04LTS

Thank you all

[oshunluvr]

Before jumping ship, try and figure out what is causing the slow down. Open ksysguard and see what's eating CPU cycles or RAM. Also, open a terminal and review the output of dmesg. Another suspect might be video. Since you have an AMD processor I would assume ATI/AMD video chip. Look into driver issues.

[Stosskraft]

Before jumping ship, try and figure out what is causing the slow down. Open ksysguard and see what's eating CPU cycles or RAM. Also, open a terminal and review the output of dmesg. Another suspect might be video. Since you have an AMD processor I would assume ATI/AMD video chip. Look into driver issues.

Here is the output of dmesg: But I have no idea what it means

[    0.000000] init_memory_mapping: [mem 0x32c000000-0x32edfffff]
[    0.000000]  [mem 0x32c000000-0x32edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
[    0.000000]  [mem 0x300000000-0x32bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x9d3e2fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0x9d1fffff] page 2M
[    0.000000]  [mem 0x9d200000-0x9d3e2fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9ea28000-0x9ea28fff]
[    0.000000]  [mem 0x9ea28000-0x9ea28fff] page 4k
[    0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x9ec2f000-0x9ed7dfff]
[    0.000000]  [mem 0x9ec2f000-0x9ed7dfff] page 4k
[    0.000000] BRK [0x01fc3000, 0x01fc3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x9f4c4000-0x9f522fff]
[    0.000000]  [mem 0x9f4c4000-0x9f522fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9f7f0000-0x9f7fffff]
[    0.000000]  [mem 0x9f7f0000-0x9f7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100001000-0x2ffffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x13fffffff] page 2M
[    0.000000]  [mem 0x140000000-0x2ffffffff] page 1G
[    0.000000] cma: CMA: reserved 64 MiB at 32ac00000
[    0.000000] RAMDISK: [mem 0x34be0000-0x365e7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009D426000 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009D426090 00009C (v01 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.000000] ACPI: FACP 0x000000009D438D00 00010C (v05 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[    0.000000] ACPI: DSDT 0x000000009D4261B8 012B41 (v02 HPQOEM 22C7     00000000 ACPI 20051117)
[    0.000000] ACPI: FACS 0x000000009D7B3F80 000040
[    0.000000] ACPI: APIC 0x000000009D438E10 000072 (v03 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: FPDT 0x000000009D438E88 000044 (v01 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: WDAT 0x000000009D438ED0 0001AC (v01 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: MCFG 0x000000009D439080 00003C (v01 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: BOOT 0x000000009D4390C0 000028 (v01 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: MSDM 0x000000009D4390E8 000055 (v03 HPQOEM SLIC-MPC 00000001 ACPI 00010013)
[    0.000000] ACPI: HPET 0x000000009D439140 000038 (v01 HPQOEM 22C7     01072009 HP   00000005)
[    0.000000] ACPI: WDRT 0x000000009D439178 000047 (v01 HPQOEM 22C7     01072009 HP   00000005)
[    0.000000] ACPI: UEFI 0x000000009D4391C0 000042 (v01 HPQOEM 22C7     01072009 HP   00000000)
[    0.000000] ACPI: VFCT 0x000000009D439208 00F284 (v01 HPQOEM 22C7     00000001 AMD  31504F47)
[    0.000000] ACPI: SSDT 0x000000009D448490 0009F8 (v01 HPQOEM 22C7     00000001 ACPI 00000001)
[    0.000000] ACPI: SSDT 0x000000009D448E88 001F6E (v02 HPQOEM 22C7     00000001 ACPI 04000000)
[    0.000000] ACPI: CRAT 0x000000009D44ADF8 0002D0 (v01 HPQOEM 22C7     00000001 AMD  00000001)
[    0.000000] ACPI: BGRT 0x000000009D44B0C8 000038 (v01 HPQOEM 22C7     01072009 HP   00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000032effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x32effffff]
[    0.000000]   NODE_DATA [mem 0x32eff5000-0x32eff9fff]
[    0.000000]  [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff88031f000000-ffff88032a3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x32effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x9d3e2fff]
[    0.000000]   node   0: [mem 0x9ea28000-0x9ea28fff]
[    0.000000]   node   0: [mem 0x9ec2f000-0x9ed7dfff]
[    0.000000]   node   0: [mem 0x9f4c4000-0x9f522fff]
[    0.000000]   node   0: [mem 0x9f7f0000-0x9f7fffff]
[    0.000000]   node   0: [mem 0x100001000-0x32effffff]
[    0.000000] On node 0 totalpages: 2934080
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10007 pages used for memmap
[    0.000000]   DMA32 zone: 640418 pages, LIFO batch:31
[    0.000000]   Normal zone: 35776 pages used for memmap
[    0.000000]   Normal zone: 2289663 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d3e3000-0x9d412fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d413000-0x9d44bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d44c000-0x9d7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d7bf000-0x9e9e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e9e4000-0x9ea27fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ea29000-0x9ec2efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ed7e000-0x9f4c3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f523000-0x9f7effff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88032ec00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2888209
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-031600-generic root=UUID=13ae25aa-d0ce-400d-8568-1e1e883e7abc ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0x90000000-0x93ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0x93ffffff]
[    0.000000] Memory: 11273364K/11736320K available (7780K kernel code, 1118K rwdata, 3704K rodata, 1368K init, 1304K bss, 462956K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 47185920 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2096.033 MHz processor
[    0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.06 BogoMIPS (lpj=8384132)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000050] ACPI: Core revision 20140424
[    0.012092] ACPI: All ACPI Tables successfully acquired
[    0.016919] Security Framework initialized
[    0.016942] AppArmor: AppArmor initialized
[    0.016944] Yama: becoming mindful.
[    0.018440] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.024918] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027815] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027841] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028299] Initializing cgroup subsys memory
[    0.028330] Initializing cgroup subsys devices
[    0.028338] Initializing cgroup subsys freezer
[    0.028342] Initializing cgroup subsys net_cls
[    0.028348] Initializing cgroup subsys blkio
[    0.028353] Initializing cgroup subsys perf_event
[    0.028356] Initializing cgroup subsys net_prio
[    0.028365] Initializing cgroup subsys hugetlb
[    0.028391] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.028396] tseg: 009f800000
[    0.028398] CPU: Physical Processor ID: 0
[    0.028399] CPU: Processor Core ID: 0
[    0.028401] mce: CPU supports 7 MCE banks
[    0.028416] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.028416] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.028416] tlb_flushall_shift: 6
[    0.028534] Freeing SMP alternatives memory: 28K (ffffffff81e6f000 - ffffffff81e76000)
[    0.031079] ftrace: allocating 31956 entries in 125 pages
[    0.045300] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085027] smpboot: CPU0: AMD A10-5745M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
[    0.192044] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.192051] ... version:                0
[    0.192053] ... bit width:              48
[    0.192054] ... generic registers:      6
[    0.192055] ... value mask:             0000ffffffffffff
[    0.192056] ... max period:             00007fffffffffff
[    0.192057] ... fixed-purpose events:   0
[    0.192059] ... event mask:             000000000000003f
[    0.193983] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.194094] x86: Booting SMP configuration:
[    0.194096] .... node  #0, CPUs:      #1
[    0.205101] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.207401]  #2<6>[    0.218403] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.231648]  #3
[    0.231649] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.233805] x86: Booted up 1 node, 4 CPUs
[    0.233810] smpboot: Total of 4 processors activated (16768.26 BogoMIPS)
[    0.235072] devtmpfs: initialized
[    0.244317] evm: security.selinux
[    0.244319] evm: security.SMACK64
[    0.244321] evm: security.SMACK64EXEC
[    0.244322] evm: security.SMACK64TRANSMUTE
[    0.244323] evm: security.SMACK64MMAP
[    0.244324] evm: security.ima
[    0.244325] evm: security.capability
[    0.244494] PM: Registering ACPI NVS region [mem 0x9d44c000-0x9d7befff] (3616768 bytes)
[    0.244579] PM: Registering ACPI NVS region [mem 0x9ea29000-0x9ec2efff] (2121728 bytes)
[    0.245847] pinctrl core: initialized pinctrl subsystem
[    0.245973] regulator-dummy: no parameters
[    0.246589] RTC time: 11:47:00, date: 08/31/14
[    0.246675] NET: Registered protocol family 16
[    0.246938] cpuidle: using governor ladder
[    0.246941] cpuidle: using governor menu
[    0.247165] ACPI: bus type PCI registered
[    0.247168] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.247344] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.247348] PCI: not using MMCONFIG
[    0.247350] PCI: Using configuration type 1 for base access
[    0.247351] PCI: Using configuration type 1 for extended access
[    0.253158] ACPI: Added _OSI(Module Device)
[    0.253163] ACPI: Added _OSI(Processor Device)
[    0.253165] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.253167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.257597] ACPI: Executed 1 blocks of module-level executable AML code
[    0.820734] ACPI: Interpreter enabled
[    0.820753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.820760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.820790] ACPI: (supports S0 S3 S4 S5)
[    0.820792] ACPI: Using IOAPIC for interrupt routing
[    0.820877] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.820949] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.821493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.824240] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.860627] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.869521] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.869531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.869839] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    0.870125] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.870863] PCI host bridge to bus 0000:00
[    0.870867] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.870870] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.870872] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.870875] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.870877] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.870880] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.870882] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.870884] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.870894] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.871088] pci 0000:00:01.0: [1002:990f] type 00 class 0x030000
[    0.871100] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.871106] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.871113] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.871156] pci 0000:00:01.0: supports D1 D2
[    0.871268] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.871277] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[    0.871322] pci 0000:00:01.1: supports D1 D2
[    0.871485] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.871534] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.871643] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[    0.871692] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.871757] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.871809] pci 0000:00:06.0: [1022:1416] type 01 class 0x060400
[    0.871865] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.872049] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.872074] pci 0000:00:10.0: reg 0x10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[    0.872189] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.872262] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.872374] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[    0.872399] pci 0000:00:10.1: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.872513] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.872586] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.872703] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.872724] pci 0000:00:11.0: reg 0x10: [io  0xf190-0xf197]
[    0.872734] pci 0000:00:11.0: reg 0x14: [io  0xf180-0xf183]
[    0.872745] pci 0000:00:11.0: reg 0x18: [io  0xf170-0xf177]
[    0.872756] pci 0000:00:11.0: reg 0x1c: [io  0xf160-0xf163]
[    0.872766] pci 0000:00:11.0: reg 0x20: [io  0xf150-0xf15f]
[    0.872777] pci 0000:00:11.0: reg 0x24: [mem 0xfeb51000-0xfeb517ff]
[    0.872969] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.872984] pci 0000:00:12.0: reg 0x10: [mem 0xfeb50000-0xfeb50fff]
[    0.873098] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.873219] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.873240] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4f000-0xfeb4f0ff]
[    0.873330] pci 0000:00:12.2: supports D1 D2
[    0.873333] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.873402] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.873511] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.873526] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
[    0.873648] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.873757] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.873778] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
[    0.873868] pci 0000:00:13.2: supports D1 D2
[    0.873870] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.873940] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.874051] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.874268] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[    0.874280] pci 0000:00:14.1: reg 0x10: [io  0xf140-0xf147]
[    0.874289] pci 0000:00:14.1: reg 0x14: [io  0xf130-0xf133]
[    0.874297] pci 0000:00:14.1: reg 0x18: [io  0xf120-0xf127]
[    0.874305] pci 0000:00:14.1: reg 0x1c: [io  0xf110-0xf113]
[    0.874314] pci 0000:00:14.1: reg 0x20: [io  0xf100-0xf10f]
[    0.874331] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.874333] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.874335] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.874337] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.874502] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.874526] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.874598] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.874762] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.874984] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.875084] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.875189] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.875204] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[    0.875326] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.875444] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.875548] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.875650] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.875752] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.875862] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.875966] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.876193] pci 0000:01:00.0: [10ec:b723] type 00 class 0x028000
[    0.876211] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.876235] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[    0.876326] pci 0000:01:00.0: supports D1 D2
[    0.876328] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.883997] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.884007] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.884012] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.884144] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.884161] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.884181] pci 0000:02:00.0: reg 0x18: [mem 0xfe914000-0xfe914fff 64bit pref]
[    0.884194] pci 0000:02:00.0: reg 0x20: [mem 0xfe910000-0xfe913fff 64bit pref]
[    0.884202] pci 0000:02:00.0: reg 0x30: [mem 0xfe900000-0xfe90ffff pref]
[    0.884277] pci 0000:02:00.0: supports D1 D2
[    0.884280] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885366] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.894530] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.894541] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.894545] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.894649] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[    0.894668] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe800fff]
[    0.894766] pci 0000:03:00.0: supports D1 D2
[    0.894768] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    0.902538] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.902551] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.902766] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.902777] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.902780] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.902782] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.902784] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.902787] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.902789] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.902791] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.903767] ACPI: IRQ 7 override to edge, high
[    0.904050] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.904156] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.904262] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.904366] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.904453] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.904522] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.904590] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.904658] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.905746] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.905822] ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[    0.906135] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.906148] vgaarb: loaded
[    0.906149] vgaarb: bridge control possible 0000:00:01.0
[    0.906570] SCSI subsystem initialized
[    0.906665] libata version 3.00 loaded.
[    0.906704] ACPI: bus type USB registered
[    0.906734] usbcore: registered new interface driver usbfs
[    0.906748] usbcore: registered new interface driver hub
[    0.906786] usbcore: registered new device driver usb
[    0.907085] PCI: Using ACPI for IRQ routing
[    0.916084] PCI: pci_cache_line_size set to 64 bytes
[    0.916167] e820: reserve RAM buffer [mem 0x9d3e3000-0x9fffffff]
[    0.916170] e820: reserve RAM buffer [mem 0x9ea29000-0x9fffffff]
[    0.916172] e820: reserve RAM buffer [mem 0x9ed7e000-0x9fffffff]
[    0.916174] e820: reserve RAM buffer [mem 0x9f523000-0x9fffffff]
[    0.916176] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[    0.916177] e820: reserve RAM buffer [mem 0x32f000000-0x32fffffff]
[    0.916327] NetLabel: Initializing
[    0.916329] NetLabel:  domain hash size = 128
[    0.916330] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.916345] NetLabel:  unlabeled traffic allowed by default
[    0.916617] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.916622] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.918837] Switched to clocksource hpet
[    0.928888] AppArmor: AppArmor Filesystem Enabled
[    0.928939] pnp: PnP ACPI init
[    0.928962] ACPI: bus type PNP registered
[    0.929144] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.929149] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.929264] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.929466] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.929550] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.929553] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.929658] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.929753] pnp 00:05: Plug and Play ACPI device, IDs SYN1ebd PNP0f13 (active)
[    0.930242] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.930245] system 00:06: [io  0x040b] has been reserved
[    0.930248] system 00:06: [io  0x04d6] has been reserved
[    0.930250] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.930253] system 00:06: [io  0x0c14] has been reserved
[    0.930255] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.930257] system 00:06: [io  0x0c52] has been reserved
[    0.930259] system 00:06: [io  0x0c6c] has been reserved
[    0.930261] system 00:06: [io  0x0c6f] has been reserved
[    0.930264] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.930266] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.930268] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.930270] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.930272] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.930275] system 00:06: [io  0x0800-0x089f] could not be reserved
[    0.930277] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.930282] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.930284] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.930287] system 00:06: [io  0xfe00-0xfefe] has been reserved
[    0.930290] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.930293] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.930296] system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.930298] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.930301] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.930304] system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.930306] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.930309] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.930414] system 00:07: [mem 0xa0000000-0xcfffffff] has been reserved
[    0.930417] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.931673] pnp: PnP ACPI: found 8 devices
[    0.931680] ACPI: bus type PNP unregistered
[    0.939895] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.939900] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.939904] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.939910] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.939913] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.939916] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.939922] pci 0000:00:06.0: PCI bridge to [bus 03]
[    0.939925] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.939931] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.939990] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.939992] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.939995] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.939997] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.939999] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.940001] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.940003] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[    0.940006] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.940008] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.940010] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.940012] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.940014] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.940016] pci_bus 0000:04: resource 4 [io  0x0000-0x03af]
[    0.940018] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7]
[    0.940020] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df]
[    0.940022] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff]
[    0.940024] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[    0.940026] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[    0.940028] pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff]
[    0.940067] NET: Registered protocol family 2
[    0.940418] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.940865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.941223] TCP: Hash tables configured (established 131072 bind 65536)
[    0.941277] TCP: reno registered
[    0.941306] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.941419] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.941592] NET: Registered protocol family 1
[    0.941617] pci 0000:00:01.0: Boot video device
[    0.944230] PCI: CLS 64 bytes, default 64
[    0.944338] Trying to unpack rootfs image as initramfs...
[    1.438896] Freeing initrd memory: 26656K (ffff880034be0000 - ffff8800365e8000)
[    1.438967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.438970] software IO TLB [mem 0x96dc6000-0x9adc6000] (64MB) mapped at [ffff880096dc6000-ffff88009adc5fff]
[    1.439102] Simple Boot Flag at 0x47 set to 0x1
[    1.439445] perf: AMD NB counters detected
[    1.439589] microcode: CPU0: patch_level=0x06001119
[    1.439603] microcode: CPU1: patch_level=0x06001119
[    1.439611] microcode: CPU2: patch_level=0x06001119
[    1.439621] microcode: CPU3: patch_level=0x06001119
[    1.439715] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.439721] LVT offset 0 assigned for vector 0x400
[    1.439739] perf: AMD IBS detected (0x000000ff)
[    1.439776] Scanning for low memory corruption every 60 seconds
[    1.440374] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.440401] Initialise system trusted keyring
[    1.440426] audit: initializing netlink subsys (disabled)
[    1.440448] audit: type=2000 audit(1409485620.328:1): initialized
[    1.441016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.443607] zbud: loaded
[    1.443883] VFS: Disk quotas dquot_6.5.2
[    1.443937] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.444820] fuse init (API version 7.23)
[    1.445003] msgmni has been set to 22272
[    1.445085] Key type big_key registered
[    1.445809] Key type asymmetric registered
[    1.445815] Asymmetric key parser 'x509' registered
[    1.445872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.445991] io scheduler noop registered
[    1.445996] io scheduler deadline registered (default)
[    1.446073] io scheduler cfq registered
[    1.446858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.446882] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.446962] efifb: probing for efifb
[    1.446982] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 1984k, total 1984k
[    1.446984] efifb: mode is 800x600x32, linelength=3328, pages=1
[    1.446985] efifb: scrolling: redraw
[    1.446987] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.448229] Console: switching to colour frame buffer device 100x37
[    1.449290] fb0: EFI VGA frame buffer device
[    1.591921] ACPI: AC Adapter [ACAD] (on-line)
[    1.592112] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.592119] ACPI: Power Button [PWRB]
[    1.592184] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.592752] ACPI: Lid Switch [LID]
[    1.592853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.592858] ACPI: Power Button [PWRF]
[    1.593033] ACPI: acpi_idle registered with cpuidle
[    1.598829] thermal LNXTHERM:00: registered as thermal_zone0
[    1.598835] ACPI: Thermal Zone [THRM] (40 C)
[    1.598920] GHES: HEST is not enabled!
[    1.599194] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.599406] ACPI: Battery Slot [BAT0] (battery absent)
[    1.602955] Linux agpgart interface v0.103
[    1.605770] brd: module loaded
[    1.607138] loop: module loaded
[    1.607597] libphy: Fixed MDIO Bus: probed
[    1.607602] tun: Universal TUN/TAP device driver, 1.6
[    1.607604] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.607734] PPP generic driver version 2.4.2
[    1.607812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.607818] ehci-pci: EHCI PCI platform driver
[    1.608051] QUIRK: Enable AMD PLL fix
[    1.608077] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.608087] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.608095] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.608108] ehci-pci 0000:00:12.2: debug port 1
[    1.608682] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[    1.619683] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.619773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.619775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.619778] usb usb1: Product: EHCI Host Controller
[    1.619780] usb usb1: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
[    1.619781] usb usb1: SerialNumber: 0000:00:12.2
[    1.620133] hub 1-0:1.0: USB hub found
[    1.620143] hub 1-0:1.0: 5 ports detected
[    1.620748] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.620756] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.620761] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.620774] ehci-pci 0000:00:13.2: debug port 1
[    1.621174] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[    1.631697] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.631812] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.631815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.631817] usb usb2: Product: EHCI Host Controller
[    1.631819] usb usb2: Manufacturer: Linux 3.16.0-031600-generic ehci_hcd
[    1.631821] usb usb2: SerialNumber: 0000:00:13.2
[    1.632174] hub 2-0:1.0: USB hub found
[    1.632186] hub 2-0:1.0: 5 ports detected
[    1.632544] ehci-platform: EHCI generic platform driver
[    1.632572] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.632579] ohci-platform: OHCI generic platform driver
[    1.632594] uhci_hcd: USB Universal Host Controller Interface driver
[    1.632940] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.632949] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.633391] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[    1.633396] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[    1.633401] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[    1.633405] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[    1.633411] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[    1.633535] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.633538] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.633540] usb usb3: Product: xHCI Host Controller
[    1.633542] usb usb3: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
[    1.633544] usb usb3: SerialNumber: 0000:00:10.0
[    1.633737] hub 3-0:1.0: USB hub found
[    1.633793] hub 3-0:1.0: 2 ports detected
[    1.633998] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.634002] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    1.636583] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.636585] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.636587] usb usb4: Product: xHCI Host Controller
[    1.636589] usb usb4: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
[    1.636591] usb usb4: SerialNumber: 0000:00:10.0
[    1.636785] hub 4-0:1.0: USB hub found
[    1.636840] hub 4-0:1.0: 2 ports detected
[    1.637223] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.637228] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[    1.637457] xhci_hcd 0000:00:10.1: irq 45 for MSI/MSI-X
[    1.637462] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
[    1.637467] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[    1.637471] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[    1.637475] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[    1.637592] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.637594] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.637596] usb usb5: Product: xHCI Host Controller
[    1.637598] usb usb5: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
[    1.637600] usb usb5: SerialNumber: 0000:00:10.1
[    1.637795] hub 5-0:1.0: USB hub found
[    1.637851] hub 5-0:1.0: 2 ports detected
[    1.638061] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.638066] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[    1.640863] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.640866] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.640868] usb usb6: Product: xHCI Host Controller
[    1.640869] usb usb6: Manufacturer: Linux 3.16.0-031600-generic xhci_hcd
[    1.640871] usb usb6: SerialNumber: 0000:00:10.1
[    1.641056] hub 6-0:1.0: USB hub found
[    1.641111] hub 6-0:1.0: 2 ports detected
[    1.641398] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.649059] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.649065] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.649309] mousedev: PS/2 mouse device common for all mice
[    1.649618] rtc_cmos 00:01: RTC can wake from S4
[    1.649761] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.649790] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.649901] device-mapper: uevent: version 1.0.3
[    1.650227] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.650252] ledtrig-cpu: registered to indicate activity on CPUs
[    1.650259] EFI Variables Facility v0.08 2004-May-17
[    1.655367] TCP: cubic registered
[    1.655641] NET: Registered protocol family 10
[    1.656032] NET: Registered protocol family 17
[    1.656052] Key type dns_resolver registered
[    1.656935] Loading compiled-in X.509 certificates
[    1.657967] Loaded X.509 cert 'Magrathea: Glacier signing key: 221aac025e17c8e76d8197a53aa765a4617ae7dc'
[    1.657998] registered taskstats version 1
[    1.660341] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.661419] Key type trusted registered
[    1.663836] Key type encrypted registered
[    1.666837] AppArmor: AppArmor sha1 policy hashing enabled
[    1.666846] ima: No TPM chip found, activating TPM-bypass!
[    1.666892] evm: HMAC attrs: 0x1
[    1.700388]   Magic number: 10:743:783
[    1.700554] rtc_cmos 00:01: setting system clock to 2014-08-31 11:47:01 UTC (1409485621)
[    1.700839] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.701239] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.701241] EDD information not available.
[    1.701384] PM: Hibernation image not present or could not be loaded.
[    1.703213] Freeing unused kernel memory: 1368K (ffffffff81d19000 - ffffffff81e6f000)
[    1.703215] Write protecting the kernel read-only data: 12288k
[    1.705698] Freeing unused kernel memory: 400K (ffff88000179c000 - ffff880001800000)
[    1.707770] Freeing unused kernel memory: 392K (ffff880001b9e000 - ffff880001c00000)
[    1.733082] systemd-udevd[117]: starting version 204
[    1.927787] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.927896] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.928149] acpi device:37: registered as cooling_device4
[    1.928279] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    1.935633] wmi: Mapper loaded
[    1.939060] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    1.939683] rtsx_pci 0000:03:00.0: irq 50 for MSI/MSI-X
[    1.939696] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 50
[    1.942288] ohci-pci: OHCI PCI platform driver
[    1.942578] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.942600] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[    1.942661] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb50000
[    1.944079] [drm] Initialized drm 1.1.0 20060810
[    1.978205] [drm] radeon kernel modesetting enabled.
[    2.000003] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.000010] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.000013] usb usb7: Product: OHCI PCI host controller
[    2.000017] usb usb7: Manufacturer: Linux 3.16.0-031600-generic ohci_hcd
[    2.000019] usb usb7: SerialNumber: 0000:00:12.0
[    2.008555] hub 7-0:1.0: USB hub found
[    2.008571] hub 7-0:1.0: 5 ports detected
[    2.040962] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.040977] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[    2.041023] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4e000
[    2.100263] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.100270] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.100273] usb usb8: Product: OHCI PCI host controller
[    2.100275] usb usb8: Manufacturer: Linux 3.16.0-031600-generic ohci_hcd
[    2.100278] usb usb8: SerialNumber: 0000:00:13.0
[    2.100524] hub 8-0:1.0: USB hub found
[    2.100538] hub 8-0:1.0: 5 ports detected
[    2.104621] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.104639] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[    2.104681] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4c000
[    2.164276] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    2.164282] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.164284] usb usb9: Product: OHCI PCI host controller
[    2.164286] usb usb9: Manufacturer: Linux 3.16.0-031600-generic ohci_hcd
[    2.164288] usb usb9: SerialNumber: 0000:00:14.5
[    2.164664] hub 9-0:1.0: USB hub found
[    2.164723] hub 9-0:1.0: 2 ports detected
[    2.164958] ahci 0000:00:11.0: version 3.0
[    2.165280] ahci 0000:00:11.0: irq 51 for MSI/MSI-X
[    2.165341] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.165346] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.166270] scsi0 : ahci
[    2.166564] scsi1 : ahci
[    2.166689] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 51
[    2.166694] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 51
[    2.166739] pata_atiixp 0000:00:14.1: enabling device (0000 -> 0001)
[    2.168630] scsi2 : pata_atiixp
[    2.168847] scsi3 : pata_atiixp
[    2.168911] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[    2.168913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[    2.168996] checking generic (d0000000 1f0000) vs hw (d0000000 10000000)
[    2.169000] fb: switching to radeondrmfb from EFI VGA
[    2.169027] Console: switching to colour dummy device 80x25
[    2.169781] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990F 0x103C:0x22C7).
[    2.169798] [drm] register mmio base: 0xFEB00000
[    2.169800] [drm] register mmio size: 262144
[    2.169806] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:990f, size 61952
[    2.169831] ATOM BIOS: BR45455.001
[    2.169897] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
[    2.169900] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[    2.169902] [drm] Detected VRAM RAM=768M, BAR=256M
[    2.169904] [drm] RAM width 64bits DDR
[    2.170127] [TTM] Zone  kernel: Available graphics memory: 5702798 kiB
[    2.170132] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.170134] [TTM] Initializing pool allocator
[    2.170142] [TTM] Initializing DMA pool allocator
[    2.170183] [drm] radeon: 768M of VRAM memory ready
[    2.170185] [drm] radeon: 1024M of GTT memory ready.
[    2.170221] [drm] Loading ARUBA Microcode
[    2.170323] [drm] Internal thermal controller without fan control
[    2.170518] [drm] radeon: dpm initialized
[    2.170719] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.185411] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[    2.185715] radeon 0000:00:01.0: WB enabled
[    2.185720] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff88032ac0bc00
[    2.186451] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011eb5a18
[    2.186455] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff88032ac0bc04
[    2.186458] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff88032ac0bc08
[    2.186461] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff88032ac0bc0c
[    2.186464] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff88032ac0bc10
[    2.186468] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.186470] [drm] Driver supports precise vblank timestamp query.
[    2.186494] radeon 0000:00:01.0: irq 52 for MSI/MSI-X
[    2.186511] radeon 0000:00:01.0: radeon: using MSI.
[    2.186790] [drm] radeon: irq initialized.
[    2.208123] [drm] ring test on 0 succeeded in 2 usecs
[    2.208185] [drm] ring test on 3 succeeded in 2 usecs
[    2.208193] [drm] ring test on 4 succeeded in 1 usecs
[    2.208248] usb 2-4: new high-speed USB device number 2 using ehci-pci
[    2.263897] [drm] ring test on 5 succeeded in 1 usecs
[    2.283779] [drm] UVD initialized successfully.
[    2.286885] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.287418] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.287952] [drm] ib test on ring 4 succeeded in 1 usecs
[    2.308739] [drm] ib test on ring 5 succeeded
[    2.359504] [drm] radeon atom DIG backlight initialized
[    2.359511] [drm] Radeon Display Connectors
[    2.359513] [drm] Connector 0:
[    2.359515] [drm]   eDP-1
[    2.359517] [drm]   HPD1
[    2.359520] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.359521] [drm]   Encoders:
[    2.359523] [drm]     LCD1: INTERNAL_UNIPHY2
[    2.359525] [drm] Connector 1:
[    2.359526] [drm]   VGA-1
[    2.359527] [drm]   HPD2
[    2.359529] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    2.359531] [drm]   Encoders:
[    2.359532] [drm]     CRT1: INTERNAL_UNIPHY2
[    2.359534] [drm]     CRT1: NUTMEG
[    2.359535] [drm] Connector 2:
[    2.359536] [drm]   HDMI-A-1
[    2.359538] [drm]   HPD3
[    2.359540] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    2.359541] [drm]   Encoders:
[    2.359543] [drm]     DFP1: INTERNAL_UNIPHY
[    2.398388] usb 2-4: New USB device found, idVendor=064e, idProduct=c341
[    2.398395] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.398399] usb 2-4: Product: HP Truevision HD
[    2.398401] usb 2-4: Manufacturer: SuYin
[    2.398404] usb 2-4: SerialNumber: HF1016-P82A-HM01-2-REV0101
[    2.436453] tsc: Refined TSC clocksource calibration: 2096.082 MHz
[    2.580715] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.656663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.660859] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.662231] ata2.00: ATAPI: hp       DVDRAM GU90N, U900, max UDMA/100
[    2.662606] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
[    2.662614] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.664540] ata1.00: configured for UDMA/133
[    2.664918] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A710 PQ: 0 ANSI: 5
[    2.665389] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.665392] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.665397] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.665517] sd 0:0:0:0: [sda] Write Protect is off
[    2.665523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.665591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.667099] ata2.00: configured for UDMA/100
[    2.672283] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GU90N     U900 PQ: 0 ANSI: 5
[    2.692504] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.692511] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.692953] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.693128] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.742948] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.742959] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.742963] usb 3-2: Product: USB Optical Mouse
[    2.742966] usb 3-2: Manufacturer: PixArt
[    2.743332] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.750937] hidraw: raw HID events driver (C) Jiri Kosina
[    2.765120] usbcore: registered new interface driver usbhid
[    2.765126] usbhid: USB HID core driver
[    2.768175] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.0/0003:093A:2510.0001/input/input7
[    2.768438] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:10.0-2/input0
[    2.770567] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x126800, board id: 2997, fw id: 1627552
[    2.810572] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.974992]  sda: sda1 sda2 sda3
[    2.975834] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.008919] usb 7-3: new full-speed USB device number 2 using ohci-pci
[    3.170252] usb 7-3: No LPM exit latency info found, disabling LPM.
[    3.188106] usb 7-3: New USB device found, idVendor=0bda, idProduct=b001
[    3.188113] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.188117] usb 7-3: Product: Bluetooth Radio 
[    3.188120] usb 7-3: Manufacturer: Realtek 
[    3.188123] usb 7-3: SerialNumber: 00e04c000001
[    3.864236] Switched to clocksource tsc
[    3.900754] [drm] fb mappable at 0xD047A000
[    3.900760] [drm] vram apper at 0xD0000000
[    3.900762] [drm] size 5787648
[    3.900764] [drm] fb depth is 24
[    3.900765] [drm]    pitch is 6400
[    3.901085] fbcon: radeondrmfb (fb0) is primary device
[    6.949081] Console: switching to colour frame buffer device 200x56
[    6.953312] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    6.953315] radeon 0000:00:01.0: registered panic notifier
[    7.029553] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[    7.650193] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    7.912936] random: nonblocking pool is initialized
[    9.342636] init: ureadahead main process (229) terminated with status 5
[   10.364197] Adding 11736060k swap on /dev/sda3.  Priority:-1 extents:1 across:11736060k FS
[   11.677967] systemd-udevd[338]: starting version 204
[   13.022088] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   13.032671] lp: driver loaded but no devices found
[   13.192677] ppdev: user-space parallel port driver
[   16.017740] Initializing HPQ6001 module
[   16.017863] input: HP Wireless hotkeys as /devices/virtual/input/input8
[   16.079757] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   16.079950] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   16.146075] hp_accel: laptop model unknown, using default axes configuration
[   16.175938] lis3lv02d: 8 bits 3DC sensor found
[   16.229679] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[   16.272939] cfg80211: Calling CRDA to update world regulatory domain
[   16.586996] Bluetooth: Core ver 2.19
[   16.587032] NET: Registered protocol family 31
[   16.587035] Bluetooth: HCI device and connection manager initialized
[   16.587048] Bluetooth: HCI socket layer initialized
[   16.587053] Bluetooth: L2CAP socket layer initialized
[   16.587069] Bluetooth: SCO socket layer initialized
[   16.646127] AVX version of gcm_enc/dec engaged.
[   16.824439] kvm: disabled by bios
[   16.846596] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[   16.846896] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   16.846952] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[   16.916099] usbcore: registered new interface driver btusb
[   16.982520] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[   17.131335] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[   17.131347] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88032a82ff78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131362] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88032a833c08), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131450] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[   17.131456] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88032a82ff78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131469] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88032a833c08), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131548] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[   17.131555] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88032a82ff78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131566] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88032a833c08), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131672] input: HP WMI hotkeys as /devices/virtual/input/input11
[   17.131932] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[   17.131939] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88032a82ff78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.131952] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88032a833c08), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.132031] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[   17.132037] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88032a82ff78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.132049] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88032a833c08), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[   17.161475] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.161483] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.161488] sound hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   17.161491] sound hdaudioC1D0:    mono: mono_out=0x0
[   17.161494] sound hdaudioC1D0:    inputs:
[   17.161498] sound hdaudioC1D0:      Mic=0x1a
[   17.161501] sound hdaudioC1D0:      Internal Mic=0x12
[   17.168822] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[   17.168997] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[   17.191206] rtl8723be 0000:01:00.0: enabling device (0000 -> 0003)
[   17.212657] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   17.325881] media: Linux media interface: v0.10
[   17.353901] Linux video capture interface: v2.00
[   17.560251] audit: type=1400 audit(1409485637.342:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=510 comm="apparmor_parser"
[   17.560263] audit: type=1400 audit(1409485637.342:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=510 comm="apparmor_parser"
[   17.560269] audit: type=1400 audit(1409485637.342:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
[   17.560733] audit: type=1400 audit(1409485637.342:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=510 comm="apparmor_parser"
[   17.560741] audit: type=1400 audit(1409485637.342:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
[   17.560963] audit: type=1400 audit(1409485637.342:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
[   17.599992] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c341)
[   17.609155] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input14
[   17.609368] usbcore: registered new interface driver uvcvideo
[   17.609373] USB Video Class driver (1.1.1)
[   17.722504] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   17.722941] rtlwifi: wireless switch is on
[   17.893450] cfg80211: World regulatory domain updated:
[   17.893457] cfg80211:  DFS Master region: unset
[   17.893459] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.893464] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.893467] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.893470] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.893473] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   17.893475] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   18.686513] audit: type=1400 audit(1409485638.466:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=682 comm="apparmor_parser"
[   18.686525] audit: type=1400 audit(1409485638.466:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=682 comm="apparmor_parser"
[   18.686995] audit: type=1400 audit(1409485638.466:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=682 comm="apparmor_parser"
[   18.980088] Bluetooth: RFCOMM TTY layer initialized
[   18.980105] Bluetooth: RFCOMM socket layer initialized
[   18.980126] Bluetooth: RFCOMM ver 1.11
[   19.134235] init: failsafe main process (641) killed by TERM signal
[   19.188008] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.188014] Bluetooth: BNEP filters: protocol multicast
[   19.188025] Bluetooth: BNEP socket layer initialized
[   19.410303] init: cups main process (702) killed by HUP signal
[   19.410322] init: cups main process ended, respawning
[   21.126776] audit: type=1400 audit(1409485640.906:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=820 comm="apparmor_parser"
[   22.654224] audit_printk_skb: 93 callbacks suppressed
[   22.654231] audit: type=1400 audit(1409485642.430:43): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cups-browsed" pid=989 comm="apparmor_parser"
[   25.976410] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.035613] init: samba-ad-dc main process (1086) terminated with status 1
[   27.561317] wlan0: authenticate with 90:94:e4:37:83:36
[   27.571560] wlan0: send auth to 90:94:e4:37:83:36 (try 1/3)
[   27.573841] wlan0: authenticated
[   27.576634] wlan0: associate with 90:94:e4:37:83:36 (try 1/3)
[   27.580368] wlan0: RX AssocResp from 90:94:e4:37:83:36 (capab=0xc11 status=0 aid=2)
[   27.580574] wlan0: associated
[   27.580589] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   27.581011] cfg80211: Calling CRDA for country: US
[   27.585866] cfg80211: Regulatory domain changed to country: US
[   27.585872] cfg80211:  DFS Master region: unset
[   27.585875] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   27.585879] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
[   27.585882] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
[   27.585886] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   27.585889] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   27.585891] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   27.585894] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[   27.585897] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   29.530755] init: plymouth-upstart-bridge main process ended, respawning
[   29.544271] init: plymouth-upstart-bridge main process (1195) terminated with status 1
[   29.544290] init: plymouth-upstart-bridge main process ended, respawning
[   48.919655] audit: type=1400 audit(1409485668.673:44): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1999 comm="apparmor_parser"
[   48.919668] audit: type=1400 audit(1409485668.673:45): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1999 comm="apparmor_parser"
[   48.920228] audit: type=1400 audit(1409485668.673:46): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1999 comm="apparmor_parser"
[ 3116.781427] wlan0: Connection to AP 90:94:e4:37:83:36 lost
[ 3116.834850] cfg80211: Calling CRDA to update world regulatory domain
[ 3116.842580] cfg80211: World regulatory domain updated:
[ 3116.842589] cfg80211:  DFS Master region: unset
[ 3116.842593] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3116.842601] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3116.842607] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3116.842613] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3116.842618] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3116.842623] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3118.224939] wlan0: authenticate with 90:94:e4:37:83:36
[ 3118.244183] wlan0: send auth to 90:94:e4:37:83:36 (try 1/3)
[ 3118.246549] wlan0: authenticated
[ 3118.247413] wlan0: associate with 90:94:e4:37:83:36 (try 1/3)
[ 3118.250919] wlan0: RX AssocResp from 90:94:e4:37:83:36 (capab=0xc11 status=0 aid=2)
[ 3118.251088] wlan0: associated
[ 3118.251183] cfg80211: Calling CRDA for country: US
[ 3118.255756] cfg80211: Regulatory domain changed to country: US
[ 3118.255762] cfg80211:  DFS Master region: unset
[ 3118.255764] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3118.255769] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
[ 3118.255772] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
[ 3118.255775] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[ 3118.255778] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[ 3118.255781] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[ 3118.255784] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[ 3118.255786] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)

[Stosskraft]

Can anyone suggest a linux flavour that works well with AMD?

[ronw]

I doubt a different distro will make a difference unless it configures your video driver differently.

Definitely look at system activity as oshunluvr suggested (Ctrl+Esc, sort by CPU), paying particular attention to nepomuk/baloo/search indexing.

Programs opening slowly, and locks up in particular, sound like video. Disable effects, try Driver Manager, search here for generic ATI advice or advice on your particular card. I have not had to descend into ATI hell for a few years now, since my last HP laptop.

[millusions]

i would bet one of my fingers that it's not AMD, not literally, and i dont think any distro is better or worse with AMD.

as suggsted before, examine dmesg and try to figure out what it means, at least some of it, so you can see if anything is wrong. (i had a quick look, couldnt see anything screaming with errors)

how/what video driver?

and it locks up?


one other thing, when it's booting and showing the kubuntu logo, press escape and see if there are any red [failed] during boot

[Stosskraft]

Hey guys thank you for the input. I am not exactly sure what is slowing down the system, I have turned down most of the effects. I am just comparing it to my 5 year old laptop that I replaced with this new (much more powerful one).

Under the driver Manager it is showing 3 options:
1. Using driver for AMD graphics accelerator for fglrx
2. Using driver for AMD graphics accelerator for fglrx-updates
3. Using X.Org X server -- AMD/ATI display driver wrapper from Xserver-xorg-video-ati (recommended driver)

There are no errors on boot up.

For example just writing this answer, I had firefox open on one desktop and the driver manager open the other. To switch between the 2 virtual desktops lagged the system quite a bit and it froze for a second. Doesnt seem right with a quad core, 16g RAM brand new laptop.

Ideas for a non-techie?

[millusions]

having had a quick look at dmesg, you have a discreet Ati card in the laptop? is that right?

to install the proprietary Ati driver drop to konsole

sudo apt-get install fglrx

to install it,
at the end of that it will compile the fglrx module for your kernel, just confirm that it says something like
fglrx modules successfully compiled etc.

reboot,

that could possibly fix your problem

[Stosskraft]

This is my card:

P-Pavilion-17-Notebook-PC:~$ lspci | grep VGA
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8610G]

[millusions]

should be fine with;

sudo apt-get install fglrx


i try to avoid driver manager with ati cards, found apt does a better job and more informative output

[Stosskraft]

I did that terminal command and rebootex. The kubuntu logo comes up really big then nothinh... just a black sceen no desktop

Pressed esc during the boot and some red fails came up but it disappearex tok quickly for me to note them down.

Now i am staringat a blank screen and using my phone to write this.

[millusions]

really? did it compile succesfully?


press ALT-CTRL F1

sudo apt-get purge fglrx

to reverse last step....

[Snowhog]

Please review BinaryDriverHowto/AMD

[Stosskraft]

It seemed to compile fine, just when I rebooted the screen was blank. Any idea how to trace what happned?

[millusions]

not sure...

hmmm.. mainly concerned now to get it back to working condition.. intially


the link Snowhog posted is a great read...

basically, it's not a straight forward install by the looks of it, have to wiggle it a bit.....

is there a /etc/X11/xorg.conf ?

normally after installing fglrx you can see it loaded with:

lsmod |grep fglrx


have a read of Snowhog's suggestion, it's the best bet