Thinkpad R31 graphics not rendering properly

[don_m]

I have a Lenovo R31. I upgraded to 13 version which went well, but now the video drivers are not rendering properly but were working fine before the upgrade.

Any suggestions?

Intel 830 MG chipset Integrated Direct AGP 3D Graphics dynamically allocates system main memory for video memory usage up to 32 MB based on application, demand, and available memory resource.

I would have posted a link, but I can't post links until I have more posts.

[SteveRiley]

From the little bit of Googling I did, it appears that the Intel Linux graphics drivers no longer support the 830 MG.

[don_m]

Thanks! Is there any way to get the drivers off the version 12 DVD I burned? I'll do some more searching when I have time. I was really hoping to be able to use this computer as a backup.

[SteveRiley]

When you say "version 12," do you mean 12.04 (Precise) or 12.10 (Quantal)?

How did you perform the upgrade to 13.04?

[don_m]

I installed 12.10.

Worked flawlessly! It even found my old 3Com wireless laptop card since the R31 has no built in wireless.

I did some updates to 12.10, and then did the upgrade through the package manager. The upgrade went without a hitch and when I rebooted I noted that the graphics were not rendering the colors properly. I don't care about the fancy stuff of the card if capable, I would just like the colors to display normally as with 12.10.

[SteveRiley]

May I see the output of

lspci -k

and

cat /var/log/Xorg.0.log

[don_m]

First command:
zack@zack-laptop:~$ lspci -k 00:00.0 Host bridge: Intel Corporation 82830M/MG/MP Host Bridge (rev 04) Subsystem: IBM Device 1017 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 82830M/MG Integrated Graphics Controller (rev 04) Subsystem: IBM Device 0505 Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation 82830M/MG Integrated Graphics Controller Subsystem: IBM Device 0505 00:1d.0 USB controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) Subsystem: IBM Device 1017 Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02) Subsystem: IBM Device 1017 Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02) Subsystem: IBM Device 1017 Kernel driver in use: uhci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) Kernel driver in use: lpc_ich 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) Subsystem: IBM Device 1017 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) Subsystem: IBM Device 1017 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) Subsystem: IBM Device 0500 Kernel driver in use: snd_intel8x0 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) Subsystem: IBM Device 0504 01:05.0 Network controller: Intersil Corporation ISL3874 [Prism 2.5]/ISL3872 [Prism 3] (rev 01) Subsystem: Actiontec Electronics Inc Device 0406 Kernel driver in use: hostap_pci 01:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) Subsystem: IBM Device 1031 Kernel driver in use: e100 01:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) Subsystem: IBM Device 1017 Kernel driver in use: yenta_cardbus 02:00.0 Ethernet controller: 3Com Corporation 3CRPAG175 Wireless PC Card (rev 01) Subsystem: 3Com Corporation Device 1026 Kernel driver in use: ath5k zack@zack-laptop:~$

[don_m]

zack@zack-laptop:~$ cat /var/log/Xorg.0.log [ 32.655] X.Org X Server 1.13.3 Release Date: 2013-03-07 [ 32.655] X Protocol Version 11, Revision 0 [ 32.655] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 32.655] Current Operating System: Linux zack-laptop 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 i686 [ 32.655] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=5584439f-03b0-4a42-8978-5b3ff21cb3a0 ro quiet splash vt.handoff=7 [ 32.656] Build Date: 17 April 2013 10:42:56PM [ 32.656] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) [ 32.656] Current version of pixman: 0.28.2 [ 32.656] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 32.656] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 32.656] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 30 20:20:41 2013 [ 32.826] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 32.827] (==) No Layout section. Using the first Screen section. [ 32.828] (==) No screen section available. Using defaults. [ 32.828] (**) |-->Screen "Default Screen Section" (0) [ 32.828] (**) | |-->Monitor "<default monitor>" [ 32.828] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 32.828] (==) Automatically adding devices [ 32.828] (==) Automatically enabling devices [ 32.828] (==) Automatically adding GPU devices [ 32.829] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 32.829] Entry deleted from font path. [ 32.829] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 32.829] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 32.829] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 32.829] (II) Loader magic: 0xb77c16a0 [ 32.829] (II) Module ABI versions: [ 32.829] X.Org ANSI C Emulation: 0.4 [ 32.829] X.Org Video Driver: 13.1 [ 32.829] X.Org XInput driver : 18.0 [ 32.829] X.Org Server Extension : 7.0 [ 32.830] (II) config/udev: Adding drm device (/dev/dri/card0) [ 32.836] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288 [ 32.836] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288 [ 32.837] (II) Open ACPI successful (/var/run/acpid.socket) [ 32.837] Initializing built-in extension Generic Event Extension [ 32.837] Initializing built-in extension SHAPE [ 32.837] Initializing built-in extension MIT-SHM [ 32.837] Initializing built-in extension XInputExtension [ 32.837] Initializing built-in extension XTEST [ 32.837] Initializing built-in extension BIG-REQUESTS [ 32.837] Initializing built-in extension SYNC [ 32.837] Initializing built-in extension XKEYBOARD [ 32.837] Initializing built-in extension XC-MISC [ 32.837] Initializing built-in extension SECURITY [ 32.837] Initializing built-in extension XINERAMA [ 32.837] Initializing built-in extension XFIXES [ 32.837] Initializing built-in extension RENDER [ 32.837] Initializing built-in extension RANDR [ 32.837] Initializing built-in extension COMPOSITE [ 32.837] Initializing built-in extension DAMAGE [ 32.837] Initializing built-in extension MIT-SCREEN-SAVER [ 32.837] Initializing built-in extension DOUBLE-BUFFER [ 32.837] Initializing built-in extension RECORD [ 32.837] Initializing built-in extension DPMS [ 32.837] Initializing built-in extension X-Resource [ 32.837] Initializing built-in extension XVideo [ 32.837] Initializing built-in extension XVideo-MotionCompensation [ 32.837] Initializing built-in extension SELinux [ 32.837] Initializing built-in extension XFree86-VidModeExtension [ 32.837] Initializing built-in extension XFree86-DGA [ 32.837] Initializing built-in extension XFree86-DRI [ 32.837] Initializing built-in extension DRI2 [ 32.838] (II) LoadModule: "glx" [ 33.094] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 33.094] (II) Module glx: vendor="X.Org Foundation" [ 33.094] compiled for 1.13.3, module version = 1.0.0 [ 33.094] ABI class: X.Org Server Extension, version 7.0 [ 33.094] (==) AIGLX enabled [ 33.094] Loading extension GLX [ 33.095] (==) Matched intel as autoconfigured driver 0 [ 33.095] (==) Matched intel as autoconfigured driver 1 [ 33.095] (==) Matched vesa as autoconfigured driver 2 [ 33.095] (==) Matched modesetting as autoconfigured driver 3 [ 33.095] (==) Matched fbdev as autoconfigured driver 4 [ 33.095] (==) Assigned the driver to the xf86ConfigLayout [ 33.095] (II) LoadModule: "intel" [ 33.096] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 33.244] (II) Module intel: vendor="X.Org Foundation" [ 33.244] compiled for 1.13.3, module version = 2.21.6 [ 33.244] Module class: X.Org Video Driver [ 33.244] ABI class: X.Org Video Driver, version 13.1 [ 33.244] (II) LoadModule: "vesa" [ 33.245] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 33.245] (II) Module vesa: vendor="X.Org Foundation" [ 33.246] compiled for 1.12.99.902, module version = 2.3.2 [ 33.246] Module class: X.Org Video Driver [ 33.246] ABI class: X.Org Video Driver, version 13.0 [ 33.246] (II) LoadModule: "modesetting" [ 33.246] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 33.247] (II) Module modesetting: vendor="X.Org Foundation" [ 33.247] compiled for 1.13.3, module version = 0.7.0 [ 33.247] Module class: X.Org Video Driver [ 33.247] ABI class: X.Org Video Driver, version 13.1 [ 33.247] (II) LoadModule: "fbdev" [ 33.247] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 33.247] (II) Module fbdev: vendor="X.Org Foundation" [ 33.247] compiled for 1.12.99.902, module version = 0.4.3 [ 33.247] Module class: X.Org Video Driver [ 33.249] ABI class: X.Org Video Driver, version 13.0 [ 33.249] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 33.251] (II) VESA: driver for VESA chipsets: vesa [ 33.251] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 33.251] (II) FBDEV: driver for framebuffer: fbdev [ 33.251] (++) using VT number 7 [ 33.252] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>) [ 33.252] (WW) Falling back to old probe method for vesa [ 33.252] (WW) Falling back to old probe method for modesetting [ 33.252] (WW) Falling back to old probe method for fbdev [ 33.252] (II) Loading sub module "fbdevhw" [ 33.252] (II) LoadModule: "fbdevhw" [ 33.253] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 33.253] (II) Module fbdevhw: vendor="X.Org Foundation" [ 33.253] compiled for 1.13.3, module version = 0.0.2 [ 33.253] ABI class: X.Org Video Driver, version 13.1 [ 33.253] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 15/16 [ 33.253] (==) intel(0): Depth 15, (--) framebuffer bpp 16 [ 33.253] (==) intel(0): RGB weight 555 [ 33.253] (==) intel(0): Default visual is TrueColor [ 33.254] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M [ 33.263] (--) intel(0): CPU: i:0000:00:02.0 [ 33.263] (**) intel(0): Framebuffer tiled [ 33.263] (**) intel(0): Pixmaps tiled [ 33.263] (**) intel(0): "Tear free" disabled [ 33.263] (**) intel(0): Forcing per-crtc-pixmaps? no [ 33.263] (II) intel(0): Output LVDS1 has no monitor section [ 33.264] (--) intel(0): found backlight control interface thinkpad_screen (type 'platform') [ 33.265] (II) intel(0): Output VGA1 has no monitor section [ 33.265] (II) intel(0): EDID for output LVDS1 [ 33.266] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 33.266] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 33.266] (II) intel(0): Printing probed modes for output LVDS1 [ 33.266] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P) [ 33.266] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 33.266] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 33.266] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 33.266] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 33.267] (II) intel(0): EDID for output VGA1 [ 33.268] (II) intel(0): Not using default mode "640x350" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "640x400" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "720x400" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "640x480" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "640x480" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "640x480" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.268] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 33.268] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1024x768i" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1280x960" (hsync out of range) [ 33.269] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1280x1024" (hsync out of range) [ 33.269] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1600x1200" (hsync out of range) [ 33.269] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1792x1344" (hsync out of range) [ 33.269] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 33.269] (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) [ 33.269] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1856x1392" (hsync out of range) [ 33.270] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1920x1440" (hsync out of range) [ 33.270] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "832x624" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) [ 33.270] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1400x1050" (hsync out of range) [ 33.270] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) [ 33.270] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1440x900" (hsync out of range) [ 33.270] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1600x1024" (hsync out of range) [ 33.270] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 33.270] (II) intel(0): Not using default mode "1680x1050" (hsync out of range) [ 33.271] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1680x1050" (hsync out of range) [ 33.271] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1920x1080" (hsync out of range) [ 33.271] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1920x1200" (hsync out of range) [ 33.271] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "2048x1536" (hsync out of range) [ 33.271] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 33.271] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) [ 33.271] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 33.271] (II) intel(0): Printing probed modes for output VGA1 [ 33.271] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 33.271] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d) [ 33.271] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 33.272] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 33.272] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 33.272] (II) intel(0): Output LVDS1 connected [ 33.272] (II) intel(0): Output VGA1 disconnected [ 33.272] (II) intel(0): Using exact sizes for initial modes [ 33.272] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 33.272] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 33.272] (==) intel(0): DPI set to (96, 96) [ 33.272] (II) Loading sub module "dri2" [ 33.272] (II) LoadModule: "dri2" [ 33.272] (II) Module "dri2" already built-in [ 33.272] (II) UnloadModule: "vesa" [ 33.272] (II) Unloading vesa [ 33.272] (II) UnloadModule: "modesetting" [ 33.272] (II) Unloading modesetting [ 33.272] (II) UnloadModule: "fbdev" [ 33.272] (II) Unloading fbdev [ 33.272] (II) UnloadSubModule: "fbdevhw" [ 33.272] (II) Unloading fbdevhw [ 33.273] (II) intel(0): SNA initialized with gen2 backend [ 33.273] (==) intel(0): Backing store disabled [ 33.273] (==) intel(0): Silken mouse enabled [ 33.273] (II) intel(0): HW Cursor enabled [ 33.273] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 33.283] (==) intel(0): DPMS enabled [ 33.283] (WW) intel(0): Textured video not supported on this hardware [ 33.283] (II) intel(0): [DRI2] Setup complete [ 33.283] (II) intel(0): [DRI2] DRI driver: i915 [ 33.283] (II) intel(0): direct rendering: DRI2 Enabled [ 33.284] (==) intel(0): hotplug detection: "enabled" [ 33.284] (--) RandR disabled [ 33.307] (II) SELinux: Disabled on system [ 34.064] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 34.064] (II) AIGLX: enabled GLX_INTEL_swap_event [ 34.064] (II) AIGLX: enabled GLX_ARB_create_context [ 34.064] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 34.064] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 34.064] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 34.064] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 34.064] (II) AIGLX: Loaded and initialized i915 [ 34.064] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 34.066] (II) intel(0): switch to mode 1024x768 on crtc 3 (pipe 0) [ 34.392] (II) intel(0): Setting screen physical size to 270 x 203 [ 34.430] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 34.440] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 34.440] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 34.440] (II) LoadModule: "evdev" [ 34.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 34.495] (II) Module evdev: vendor="X.Org Foundation" [ 34.495] compiled for 1.13.3, module version = 2.7.3 [ 34.495] Module class: X.Org XInput Driver [ 34.495] ABI class: X.Org XInput driver, version 18.0 [ 34.495] (II) Using input driver 'evdev' for 'Power Button' [ 34.495] (**) Power Button: always reports core events [ 34.495] (**) evdev: Power Button: Device: "/dev/input/event2" [ 34.495] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 34.495] (--) evdev: Power Button: Found keys [ 34.495] (II) evdev: Power Button: Configuring as keyboard [ 34.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 34.496] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 34.496] (**) Option "xkb_rules" "evdev" [ 34.496] (**) Option "xkb_model" "pc105" [ 34.496] (**) Option "xkb_layout" "us" [ 34.497] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 34.498] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 34.498] (II) Using input driver 'evdev' for 'Video Bus' [ 34.498] (**) Video Bus: always reports core events [ 34.499] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 34.500] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 34.500] (--) evdev: Video Bus: Found keys [ 34.500] (II) evdev: Video Bus: Configuring as keyboard [ 34.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4/event4" [ 34.500] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 34.500] (**) Option "xkb_rules" "evdev" [ 34.500] (**) Option "xkb_model" "pc105" [ 34.500] (**) Option "xkb_layout" "us" [ 34.502] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 34.502] (II) No input driver specified, ignoring this device. [ 34.502] (II) This device may have been added with another device file. [ 34.502] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 34.502] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 34.502] (II) Using input driver 'evdev' for 'Sleep Button' [ 34.502] (**) Sleep Button: always reports core events [ 34.502] (**) evdev: Sleep Button: Device: "/dev/input/event0" [ 34.503] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 34.503] (--) evdev: Sleep Button: Found keys [ 34.503] (II) evdev: Sleep Button: Configuring as keyboard [ 34.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 34.503] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 34.503] (**) Option "xkb_rules" "evdev" [ 34.503] (**) Option "xkb_model" "pc105" [ 34.503] (**) Option "xkb_layout" "us" [ 34.504] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 34.504] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 34.505] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 34.505] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 34.505] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 34.505] (**) AT Translated Set 2 keyboard: always reports core events [ 34.505] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 34.505] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 34.505] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 34.505] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 34.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 34.505] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 34.505] (**) Option "xkb_rules" "evdev" [ 34.505] (**) Option "xkb_model" "pc105" [ 34.505] (**) Option "xkb_layout" "us" [ 34.507] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5) [ 34.507] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 34.507] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall" [ 34.507] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 34.507] (**) TPPS/2 IBM TrackPoint: always reports core events [ 34.507] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event5" [ 34.507] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 34.507] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 34.507] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 34.507] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 34.507] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 34.507] (**) Option "Emulate3Buttons" "true" [ 34.507] (**) Option "EmulateWheel" "true" [ 34.507] (**) Option "EmulateWheelButton" "2" [ 34.508] (**) Option "YAxisMapping" "4 5" [ 34.508] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 34.508] (**) Option "XAxisMapping" "6 7" [ 34.508] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 [ 34.508] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 34.508] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 34.508] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10) [ 34.508] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 34.508] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 34.509] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 34.509] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 34.509] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 34.509] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0) [ 34.509] (II) No input driver specified, ignoring this device. [ 34.509] (II) This device may have been added with another device file. [ 34.515] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6) [ 34.515] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 34.515] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 34.515] (**) ThinkPad Extra Buttons: always reports core events [ 34.515] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6" [ 34.515] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054 [ 34.515] (--) evdev: ThinkPad Extra Buttons: Found keys [ 34.515] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 34.515] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6" [ 34.515] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11) [ 34.515] (**) Option "xkb_rules" "evdev" [ 34.515] (**) Option "xkb_model" "pc105" [ 34.515] (**) Option "xkb_layout" "us" zack@zack-laptop:~$

[don_m]

Ok, here is the update.

I was using Opera as a web browser because Rekonq crashes each and every time I run it. I did install Firefox, and it ran only once properly and had properly rendered pics and hereafter it is crashing my computer.

Probably nothing wrong with driver.

[SteveRiley]

Wow, those are super hard to read without carriage returns...how did you capture the text?

Anyway, it seems that the i915 driver is working fine still for that old chipset, even though Intel's web site no longer lists it. I'd probably rule that out, then, as the source of your problem. Sounds like something else is malfunctioning, given your description of trouble with browsers.

You could try installing 13.04 directly, rather than via an upgrade. Not sure what else to suggest at the moment.

[don_m]

Sorry about the mess!

I opened the terminal separately for each command and selected all of the text to copy.

I'll try installing fresh. I have Ubuntu/XP on an R61 I installed myself.

This is one thing keeps from going full Linux is the tendency for the upgrades to break something though it is not practical to test every configuration out there. Modem support would be appreciated to on the newer computers.

Thanks!