Extremely slow login after update in 12.04 Precise Pangolin

[Wayne]

Hello guys!

I installed Ubuntu and selected the KDE desktop as my desktop of preference. A few days later I updated everything that was available in the update manager - about 300Mib of updates. Sadly, ever since then my login startup has gone from about 22 seconds to over 4 minutes!! :eek:

The Ubuntu logo with the five dots below it shows for about 1.5 minutes, then the actual login screen is displayed, but no input is possible for another 1.5 minutes. Then, when I've finally logged in, it takes yet another minute plus to show icons and play the welcome tone. After this, everything works fine and fast.

Please help me here - it's very frustrating!

Wayne

[SteveRiley]

Is there a lot of disk activity during these delays?

Would you mind installing the bootchart utility, running through a reboot with this activated, and show us the graph that it generates?

[Wayne]

With my KDE desktop missing (my other thread you responded to), I am now logging in to Unity, where I don't really know my way around. Could you explain how to do this, please? ....and yes, hard drive LED goes mad!

[SteveRiley]

Run:

sudo apt-get install bootchart pybootchartgui

After you reboot, an image file will appear in /var/log/bootchart. Save the file someplace online (Imgur is good), and then link the URL here.

I may or may not be able to examine your details now...it's getting late here in Copenhagen, had a long day #1 at Ubuntu Developer Summit, feeling tired.

[SteveRiley]

Oh, and also, please provide the output of

dmesg

[Wayne]

Ok, will do tomorrow. Off to bed myself for now....

[Wayne]

I'm back. Hope your day wasn't as exhausting as yesterday!

Okay, so it seems the re-installation of the Kubuntu desktop has sorted the first two delays. Progress is sweet...! However, after entering my login details, I still have to wait about 1.5 minutes for the icons to appear and the startup sound to play.

So here's what you asked for:

http://i.imgur.com/XiguS.png

and

[    0.000058] Yama: becoming mindful.
[    0.000120] Mount-cache hash table entries: 512
[    0.000274] Initializing cgroup subsys cpuacct
[    0.000283] Initializing cgroup subsys memory
[    0.000292] Initializing cgroup subsys devices
[    0.000295] Initializing cgroup subsys freezer
[    0.000298] Initializing cgroup subsys blkio
[    0.000304] Initializing cgroup subsys perf_event
[    0.000338] CPU: Physical Processor ID: 0
[    0.000340] CPU: Processor Core ID: 0
[    0.000346] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000348] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000352] mce: CPU supports 7 MCE banks
[    0.000369] CPU0: Thermal monitoring enabled (TM1)
[    0.000377] using mwait in idle threads.
[    0.003707] ACPI: Core revision 20110623
[    0.031809] ftrace: allocating 26564 entries in 52 pages
[    0.046739] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.047173] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086850] CPU0: Intel(R) Celeron(R) CPU B800 @ 1.50GHz stepping 07
[    0.191442] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.191450] PEBS disabled due to CPU errata.
[    0.191454] ... version:                3
[    0.191456] ... bit width:              48
[    0.191457] ... generic registers:      8
[    0.191460] ... value mask:             0000ffffffffffff
[    0.191462] ... max period:             000000007fffffff
[    0.191464] ... fixed-purpose events:   3
[    0.191466] ... event mask:             00000007000000ff
[    0.191679] NMI watchdog enabled, takes one hw-pmu counter.
[    0.191787] CPU 1 irqstacks, hard=f7558000 soft=f755a000
[    0.191789] Booting Node   0, Processors  #1
[    0.191793] smpboot cpu 1: start_ip = 99000
[    0.202061] Initializing CPU#1
[    0.299585] NMI watchdog enabled, takes one hw-pmu counter.
[    0.299620] Brought up 2 CPUs
[    0.299623] Total of 2 processors activated (5986.49 BogoMIPS).
[    0.301624] devtmpfs: initialized
[    0.301785] EVM: security.selinux
[    0.301787] EVM: security.SMACK64
[    0.301789] EVM: security.capability
[    0.301823] PM: Registering ACPI NVS region at a6ebf000 (1048576 bytes)
[    0.303152] print_constraints: dummy: 
[    0.303188] RTC time: 21:49:23, date: 10/30/12
[    0.303238] NET: Registered protocol family 16
[    0.303326] Trying to unpack rootfs image as initramfs...
[    0.303390] EISA bus registered
[    0.303415] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.303418] ACPI: bus type pci registered
[    0.303515] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.303520] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.303522] PCI: Using MMCONFIG for extended config space
[    0.303524] PCI: Using configuration type 1 for base access
[    0.304894] bio: create slab <bio-0> at 0
[    0.304996] ACPI: Added _OSI(Module Device)
[    0.304999] ACPI: Added _OSI(Processor Device)
[    0.305001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.305004] ACPI: Added _OSI(Processor Aggregator Device)
[    0.307679] ACPI: EC: Look up EC in DSDT
[    0.347617] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.348210] ACPI: SSDT a6e70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.348901] ACPI: Dynamic OEM Table Load:
[    0.348905] ACPI: SSDT   (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.379939] ACPI: SSDT a6e71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.380695] ACPI: Dynamic OEM Table Load:
[    0.380699] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.411709] ACPI: SSDT a6e6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.412395] ACPI: Dynamic OEM Table Load:
[    0.412399] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.905675] Freeing initrd memory: 19772k freed
[    1.221501] ACPI: Interpreter enabled
[    1.221519] ACPI: (supports S0 S3 S4 S5)
[    1.221556] ACPI: Using IOAPIC for interrupt routing
[    1.257791] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.258044] ACPI: No dock devices found.
[    1.258046] HEST: Table not found.
[    1.258054] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.258535] \_SB_.PCI0:_OSC invalid UUID
[    1.258537] _OSC request data:1 8 1f 
[    1.258543] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.259358] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.259361] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.259365] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.259369] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[    1.259387] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    1.259445] pci 0000:00:02.0: [8086:0106] type 0 class 0x000300
[    1.259462] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.259473] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.259480] pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
[    1.259578] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.259618] pci 0000:00:16.0: reg 10: [mem 0xc2604000-0xc260400f 64bit]
[    1.259748] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.259755] pci 0000:00:16.0: PME# disabled
[    1.259813] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.260123] pci 0000:00:1a.0: reg 10: [mem 0xc2609000-0xc26093ff]
[    1.261832] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.261839] pci 0000:00:1a.0: PME# disabled
[    1.261880] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.261910] pci 0000:00:1b.0: reg 10: [mem 0xc2600000-0xc2603fff 64bit]
[    1.262049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.262055] pci 0000:00:1b.0: PME# disabled
[    1.262093] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.262239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.262245] pci 0000:00:1c.0: PME# disabled
[    1.262286] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    1.262432] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.262438] pci 0000:00:1c.2: PME# disabled
[    1.262481] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    1.262627] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.262634] pci 0000:00:1c.4: PME# disabled
[    1.262687] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.262984] pci 0000:00:1d.0: reg 10: [mem 0xc2608000-0xc26083ff]
[    1.264700] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.264706] pci 0000:00:1d.0: PME# disabled
[    1.264742] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    1.264944] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.264984] pci 0000:00:1f.2: reg 10: [io  0x4088-0x408f]
[    1.265000] pci 0000:00:1f.2: reg 14: [io  0x4094-0x4097]
[    1.265016] pci 0000:00:1f.2: reg 18: [io  0x4080-0x4087]
[    1.265032] pci 0000:00:1f.2: reg 1c: [io  0x4090-0x4093]
[    1.265048] pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
[    1.265064] pci 0000:00:1f.2: reg 24: [mem 0xc2607000-0xc26077ff]
[    1.265162] pci 0000:00:1f.2: PME# supported from D3hot
[    1.265168] pci 0000:00:1f.2: PME# disabled
[    1.265199] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.265229] pci 0000:00:1f.3: reg 10: [mem 0xc2605000-0xc26050ff 64bit]
[    1.265271] pci 0000:00:1f.3: reg 20: [io  0x4040-0x405f]
[    1.265485] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[    1.265561] pci 0000:01:00.0: reg 10: [io  0x3000-0x30ff]
[    1.265696] pci 0000:01:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    1.265779] pci 0000:01:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    1.266147] pci 0000:01:00.0: supports D1 D2
[    1.266150] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.266167] pci 0000:01:00.0: PME# disabled
[    1.271119] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.271129] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.271149] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.271297] pci 0000:02:00.0: [168c:0032] type 0 class 0x000280
[    1.271359] pci 0000:02:00.0: reg 10: [mem 0xc2500000-0xc257ffff 64bit]
[    1.271508] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    1.271665] pci 0000:02:00.0: supports D1 D2
[    1.271667] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.271682] pci 0000:02:00.0: PME# disabled
[    1.279076] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    1.279091] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    1.279287] pci 0000:03:00.0: [10ec:5209] type 0 class 0x00ff00
[    1.279357] pci 0000:03:00.0: reg 10: [mem 0xc1500000-0xc1500fff]
[    1.279860] pci 0000:03:00.0: supports D1 D2
[    1.279863] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    1.279878] pci 0000:03:00.0: PME# disabled
[    1.287106] pci 0000:00:1c.4: PCI bridge to [bus 03-08]
[    1.287116] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    1.287126] pci 0000:00:1c.4:   bridge window [mem 0xc1500000-0xc24fffff]
[    1.287142] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[    1.287184] pci_bus 0000:00: on NUMA node 0
[    1.287188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.287486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.287547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.287605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    1.287744] \_SB_.PCI0:_OSC invalid UUID
[    1.287746] _OSC request data:1 1f 1f 
[    1.287752]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.287799] \_SB_.PCI0:_OSC invalid UUID
[    1.287801] _OSC request data:1 0 1d 
[    1.287807]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.287809] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.292148] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.292220] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.292289] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.292355] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.292421] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.292488] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.292556] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.292622] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.292765] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.292776] vgaarb: loaded
[    1.292778] vgaarb: bridge control possible 0000:00:02.0
[    1.292922] i2c-core: driver [aat2870] using legacy suspend method
[    1.292925] i2c-core: driver [aat2870] using legacy resume method
[    1.293020] SCSI subsystem initialized
[    1.293078] libata version 3.00 loaded.
[    1.293145] usbcore: registered new interface driver usbfs
[    1.293159] usbcore: registered new interface driver hub
[    1.293193] usbcore: registered new device driver usb
[    1.293310] PCI: Using ACPI for IRQ routing
[    1.305327] PCI: pci_cache_line_size set to 64 bytes
[    1.305429] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    1.305432] reserve RAM buffer: 00000000a6e3f000 - 00000000a7ffffff 
[    1.305436] reserve RAM buffer: 00000000a7000000 - 00000000a7ffffff 
[    1.305439] reserve RAM buffer: 000000014fe00000 - 000000014fffffff 
[    1.305569] NetLabel: Initializing
[    1.305572] NetLabel:  domain hash size = 128
[    1.305574] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.305587] NetLabel:  unlabeled traffic allowed by default
[    1.305656] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.305666] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.307689] Switching to clocksource hpet
[    1.317113] AppArmor: AppArmor Filesystem Enabled
[    1.317143] pnp: PnP ACPI init
[    1.317162] ACPI: bus type pnp registered
[    1.317619] pnp 00:00: [bus 00-fe]
[    1.317623] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.317626] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.317629] pnp 00:00: [io  0x0d00-0xffff window]
[    1.317632] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.317635] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.317638] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.317641] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.317644] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.317647] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.317650] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.317653] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.317655] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.317658] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.317661] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.317664] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.317667] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.317670] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.317673] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[    1.317757] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.317777] pnp 00:01: [io  0x0000-0x001f]
[    1.317779] pnp 00:01: [io  0x0081-0x0091]
[    1.317782] pnp 00:01: [io  0x0093-0x009f]
[    1.317784] pnp 00:01: [io  0x00c0-0x00df]
[    1.317787] pnp 00:01: [dma 4]
[    1.317819] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.317831] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.317861] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.317956] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.317989] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.318003] pnp 00:04: [io  0x00f0]
[    1.318015] pnp 00:04: [irq 13]
[    1.318047] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.318062] pnp 00:05: [io  0x002e-0x002f]
[    1.318064] pnp 00:05: [io  0x004e-0x004f]
[    1.318067] pnp 00:05: [io  0x0061]
[    1.318069] pnp 00:05: [io  0x0063]
[    1.318071] pnp 00:05: [io  0x0065]
[    1.318074] pnp 00:05: [io  0x0067]
[    1.318076] pnp 00:05: [io  0x0070]
[    1.318078] pnp 00:05: [io  0x0080]
[    1.318081] pnp 00:05: [io  0x0092]
[    1.318083] pnp 00:05: [io  0x00b2-0x00b3]
[    1.318086] pnp 00:05: [io  0x0680-0x069f]
[    1.318088] pnp 00:05: [io  0x1000-0x100f]
[    1.318091] pnp 00:05: [io  0xffff]
[    1.318093] pnp 00:05: [io  0xffff]
[    1.318095] pnp 00:05: [io  0x0400-0x0453]
[    1.318098] pnp 00:05: [io  0x0458-0x047f]
[    1.318100] pnp 00:05: [io  0x0500-0x057f]
[    1.318103] pnp 00:05: [io  0x164e-0x164f]
[    1.318167] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.318170] system 00:05: [io  0x1000-0x100f] has been reserved
[    1.318173] system 00:05: [io  0xffff] has been reserved
[    1.318177] system 00:05: [io  0xffff] has been reserved
[    1.318180] system 00:05: [io  0x0400-0x0453] has been reserved
[    1.318183] system 00:05: [io  0x0458-0x047f] has been reserved
[    1.318186] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.318189] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.318194] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.318205] pnp 00:06: [io  0x0070-0x0077]
[    1.318212] pnp 00:06: [irq 8]
[    1.318243] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.318271] pnp 00:07: [io  0x0454-0x0457]
[    1.318319] system 00:07: [io  0x0454-0x0457] has been reserved
[    1.318324] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.318335] pnp 00:08: [io  0x0060]
[    1.318338] pnp 00:08: [io  0x0064]
[    1.318344] pnp 00:08: [irq 1]
[    1.318378] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.318393] pnp 00:09: [irq 12]
[    1.318429] pnp 00:09: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[    1.332453] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.332457] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    1.332459] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.332462] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.332465] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.332467] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.332470] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    1.332473] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.332476] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.332478] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[    1.332551] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.332555] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.332558] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.332562] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.332568] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    1.332572] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.332575] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.332579] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    1.332583] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.332586] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[    1.332591] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.332887] pnp 00:0b: [mem 0x20000000-0x201fffff]
[    1.332890] pnp 00:0b: [mem 0x40000000-0x401fffff]
[    1.332970] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[    1.332973] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[    1.332977] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.333002] pnp: PnP ACPI: found 12 devices
[    1.333004] ACPI: ACPI bus type pnp unregistered
[    1.333008] PnPBIOS: Disabled by ACPI PNP
[    1.370302] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.370308] PCI: max bus depth: 1 pci_try_num: 2
[    1.370356] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref]
[    1.370359] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.370364] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.370377] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.370389] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref]
[    1.370392] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    1.370401] pci 0000:00:1c.2:   bridge window [mem 0xc2500000-0xc25fffff]
[    1.370408] pci 0000:00:1c.2:   bridge window [mem 0xafb00000-0xafbfffff pref]
[    1.370419] pci 0000:00:1c.4: PCI bridge to [bus 03-08]
[    1.370423] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    1.370432] pci 0000:00:1c.4:   bridge window [mem 0xc1500000-0xc24fffff]
[    1.370439] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
[    1.370467] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.370474] pci 0000:00:1c.0: setting latency timer to 64
[    1.370489] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.370496] pci 0000:00:1c.2: setting latency timer to 64
[    1.370506] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.370512] pci 0000:00:1c.4: setting latency timer to 64
[    1.370518] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.370521] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.370524] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.370527] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[    1.370531] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.370534] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    1.370537] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff]
[    1.370540] pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref]
[    1.370543] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.370546] pci_bus 0000:03: resource 1 [mem 0xc1500000-0xc24fffff]
[    1.370549] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
[    1.370587] NET: Registered protocol family 2
[    1.370658] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.370858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.371195] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.371346] TCP: Hash tables configured (established 131072 bind 65536)
[    1.371349] TCP reno registered
[    1.371353] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.371360] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.371455] NET: Registered protocol family 1
[    1.371472] pci 0000:00:02.0: Boot video device
[    1.371496] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.387652] pci 0000:00:1a.0: PCI INT A disabled
[    1.387700] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.403637] pci 0000:00:1d.0: PCI INT A disabled
[    1.403680] PCI: CLS 64 bytes, default 64
[    1.403691] Simple Boot Flag at 0x44 set to 0x1
[    1.404213] audit: initializing netlink socket (disabled)
[    1.404224] type=2000 audit(1351633763.256:1): initialized
[    1.436074] highmem bounce pool size: 64 pages
[    1.436080] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.438831] VFS: Disk quotas dquot_6.5.2
[    1.438908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.439571] fuse init (API version 7.17)
[    1.439719] msgmni has been set to 1634
[    1.440123] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.440154] io scheduler noop registered
[    1.440157] io scheduler deadline registered
[    1.440167] io scheduler cfq registered (default)
[    1.440536] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.440567] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.440656] intel_idle: MWAIT substates: 0x120
[    1.440658] intel_idle: v0.4 model 0x2A
[    1.440660] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.441380] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.441770] ACPI: AC Adapter [AC] (on-line)
[    1.442002] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.442429] ACPI: Lid Switch [LID]
[    1.442492] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.442498] ACPI: Power Button [PWRB]
[    1.442553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.442557] ACPI: Power Button [PWRF]
[    1.464141] thermal LNXTHERM:00: registered as thermal_zone0
[    1.464144] ACPI: Thermal Zone [TSZ0] (51 C)
[    1.464169] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.464179] ACPI: Battery Slot [BAT0] (battery present)
[    1.464218] ERST: Table is not found!
[    1.464220] GHES: HEST is not enabled!
[    1.464271] isapnp: Scanning for PnP cards...
[    1.464303] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.503886] ACPI: Battery Slot [BAT0] (battery present)
[    1.818249] isapnp: No Plug & Play device found
[    1.863960] Linux agpgart interface v0.103
[    1.864083] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.864157] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.864895] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.865035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.866948] brd: module loaded
[    1.867938] loop: module loaded
[    1.868102] ahci 0000:00:1f.2: version 3.0
[    1.868128] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.868193] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.868239] ahci: SSS flag set, parallel bus scan disabled
[    1.883501] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.883510] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.883521] ahci 0000:00:1f.2: setting latency timer to 64
[    1.892176] scsi0 : ahci
[    1.892300] scsi1 : ahci
[    1.892395] scsi2 : ahci
[    1.892489] scsi3 : ahci
[    1.892581] scsi4 : ahci
[    1.892673] scsi5 : ahci
[    1.892741] ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 40
[    1.892744] ata2: DUMMY
[    1.892748] ata3: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607200 irq 40
[    1.892750] ata4: DUMMY
[    1.892752] ata5: DUMMY
[    1.892754] ata6: DUMMY
[    1.893297] Fixed MDIO Bus: probed
[    1.893322] tun: Universal TUN/TAP device driver, 1.6
[    1.893324] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.893388] PPP generic driver version 2.4.2
[    1.893513] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.893531] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.893552] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.893556] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.893616] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.893648] ehci_hcd 0000:00:1a.0: debug port 2
[    1.897537] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.897556] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc2609000
[    1.911466] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.911682] hub 1-0:1.0: USB hub found
[    1.911687] hub 1-0:1.0: 2 ports detected
[    1.911764] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.911782] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.911786] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.911844] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.911872] ehci_hcd 0000:00:1d.0: debug port 2
[    1.915750] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.915767] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc2608000
[    1.931459] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.931657] hub 2-0:1.0: USB hub found
[    1.931662] hub 2-0:1.0: 2 ports detected
[    1.931737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.931753] uhci_hcd: USB Universal Host Controller Interface driver
[    1.931814] usbcore: registered new interface driver libusual
[    1.931876] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.941158] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.941165] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.941321] mousedev: PS/2 mouse device common for all mice
[    1.941542] rtc_cmos 00:06: RTC can wake from S4
[    1.941671] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.941702] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.941774] device-mapper: uevent: version 1.0.3
[    1.941865] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.941902] EISA: Probing bus 0 at eisa.0
[    1.941905] EISA: Cannot allocate resource for mainboard
[    1.941907] Cannot allocate resource for EISA slot 1
[    1.941909] Cannot allocate resource for EISA slot 2
[    1.941912] Cannot allocate resource for EISA slot 3
[    1.941914] Cannot allocate resource for EISA slot 4
[    1.941916] Cannot allocate resource for EISA slot 5
[    1.941918] Cannot allocate resource for EISA slot 6
[    1.941920] Cannot allocate resource for EISA slot 7
[    1.941922] Cannot allocate resource for EISA slot 8
[    1.941925] EISA: Detected 0 cards.
[    1.941935] cpufreq-nforce2: No nForce2 chipset.
[    1.941992] cpuidle: using governor ladder
[    1.942098] cpuidle: using governor menu
[    1.942101] EFI Variables Facility v0.08 2004-May-17
[    1.942349] TCP cubic registered
[    1.942500] NET: Registered protocol family 10
[    1.943089] NET: Registered protocol family 17
[    1.943095] Registering the dns_resolver key type
[    1.943117] Using IPI No-Shortcut mode
[    1.943291] PM: Hibernation image not present or could not be loaded.
[    1.943304] registered taskstats version 1
[    1.946374] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.953877]   Magic number: 0:297:855
[    1.953968] rtc_cmos 00:06: setting system clock to 2012-10-30 21:49:24 UTC (1351633764)
[    1.954485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.954487] EDD information not available.
[    2.211394] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.213744] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/100
[    2.213753] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.216146] ata1.00: configured for UDMA/100
[    2.216447] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
[    2.216635] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.216649] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.216693] sd 0:0:0:0: [sda] Write Protect is off
[    2.216696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.216735] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.223392] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.254100]  sda: sda1 sda2 < sda5 > sda3
[    2.255018] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.356190] hub 1-1:1.0: USB hub found
[    2.356351] hub 1-1:1.0: 6 ports detected
[    2.403318] Refined TSC clocksource calibration: 1496.585 MHz.
[    2.403327] Switching to clocksource tsc
[    2.467294] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.535282] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.539209] ata3.00: ATAPI: hp      DVD A  DS8A5LH, 1H68, max UDMA/100
[    2.540644] ata3.00: configured for UDMA/100
[    2.544694] scsi 2:0:0:0: CD-ROM            hp       DVD A  DS8A5LH   1H68 PQ: 0 ANSI: 5
[    2.550465] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.550472] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.550704] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.550803] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.551161] Freeing unused kernel memory: 740k freed
[    2.551414] Write protecting the kernel text: 5824k
[    2.551455] Write protecting the kernel read-only data: 2376k
[    2.551457] NX-protecting the kernel data: 4416k
[    2.588940] zram: module is from the staging directory, the quality is unknown, you have been warned.
[    2.589228] zram: num_devices not specified. Using default: 1
[    2.589231] zram: Creating 1 devices ...
[    2.593987] udevd[118]: starting version 175
[    2.599927] hub 2-1:1.0: USB hub found
[    2.599997] hub 2-1:1.0: 6 ports detected
[    2.671355] usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
[    2.674191] [drm] Initialized drm 1.1.0 20060810
[    2.681599] wmi: Mapper loaded
[    2.700797] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.700803] i915 0000:00:02.0: setting latency timer to 64
[    2.715240] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.715269] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.715314] r8169 0000:01:00.0: setting latency timer to 64
[    2.715402] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    2.715940] r8169 0000:01:00.0: eth0: RTL8105e at 0xf8420000, 2c:76:8a:d5:15:fa, XID 00a00000 IRQ 41
[    2.725279] Adding 1983540k swap on /dev/zram0.  Priority:100 extents:1 across:1983540k SS
[    2.726621] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[    2.726626] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    2.727078] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    2.727085] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.727087] [drm] Driver supports precise vblank timestamp query.
[    2.727126] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.939279] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[    3.103271] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
[    3.328991] fbcon: inteldrmfb (fb0) is primary device
[    3.329048] Console: switching to colour frame buffer device 170x48
[    3.329092] fb0: inteldrmfb frame buffer device
[    3.329094] drm: registered panic notifier
[    3.350693] acpi device:33: registered as cooling_device2
[    3.351152] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    3.351206] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.351235] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.858894] Btrfs loaded
[    3.865659] xor: automatically using best checksumming function: pIII_sse
[    3.882801]    pIII_sse  :  6726.000 MB/sec
[    3.882804] xor: using function: pIII_sse (6726.000 MB/sec)
[    3.883556] device-mapper: dm-raid45: initialized v0.2594b
[    4.175624] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    4.175629] EXT4-fs (sda3): write access will be enabled during recovery
[    7.345628] EXT4-fs (sda3): recovery complete
[    7.346321] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    9.363859] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.563414] Adding 102396k swap on /dev/sda1.  Priority:-1 extents:1 across:102396k 
[    9.734475] udevd[447]: starting version 175
[   10.836016] lp: driver loaded but no devices found
[   10.859943] usb 1-1.4: USB disconnect, device number 4
[   11.216512] Linux video capture interface: v2.00
[   11.413823] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b249)
[   11.428710] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[   11.428812] usbcore: registered new interface driver uvcvideo
[   11.428815] USB Video Class driver (1.1.1)
[   11.528943] Bluetooth: Core ver 2.16
[   11.528967] NET: Registered protocol family 31
[   11.528970] Bluetooth: HCI device and connection manager initialized
[   11.528974] Bluetooth: HCI socket layer initialized
[   11.528976] Bluetooth: L2CAP socket layer initialized
[   11.528982] Bluetooth: SCO socket layer initialized
[   11.530930] cfg80211: Calling CRDA to update world regulatory domain
[   11.581632] cdc_acm 2-1.3:1.4: ttyACM0: USB ACM device
[   11.582507] usbcore: registered new interface driver cdc_acm
[   11.582510] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   11.584735] NET: Registered protocol family 35
[   12.025897] input: HP WMI hotkeys as /devices/virtual/input/input6
[   12.043248] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[   12.043258] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   12.043271] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   12.043550] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[   12.043558] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   12.043569] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   12.116460] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   12.116852] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.116861] mei 0000:00:16.0: setting latency timer to 64
[   12.116948] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[   12.263418] device-mapper: multipath: version 1.3.0 loaded
[   12.295903] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[   12.331191] usbcore: registered new interface driver cdc_phonet
[   12.349717] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   12.420701] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[   12.421875] Initializing Realtek PCIE storage driver...
[   12.421913] rts_pstor 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.421968] Resource length: 0x1000
[   12.421987] Original address: 0xc1500000, remapped address: 0xf8520000
[   12.421991] pci->irq = 16
[   12.421993] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
[   12.422010] rts_pstor 0000:03:00.0: setting latency timer to 64
[   12.430471] usbcore: registered new interface driver cdc_ether
[   12.465411] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   12.465457] usbcore: registered new interface driver btusb
[   12.624169] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[   12.624452] rts_pstor: waiting for device to settle before scanning
[   12.652692] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[   12.653526] usbcore: registered new interface driver ath3k
[   12.655445] usb 2-1.3: bad CDC descriptors
[   12.655481] usbcore: registered new interface driver rndis_host
[   12.895832] usb 2-1.3: bad CDC descriptors
[   12.895888] usbcore: registered new interface driver rndis_wlan
[   13.306243] ath9k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.306267] ath9k 0000:02:00.0: setting latency timer to 64
[   13.314796] ath: EEPROM regdomain: 0x60
[   13.314798] ath: EEPROM indicates we should expect a direct regpair map
[   13.314801] ath: Country alpha2 being used: 00
[   13.314803] ath: Regpair used: 0x60
[   13.314807] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   13.314811] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314814] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   13.314817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314820] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   13.314823] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314826] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   13.314829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314832] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   13.314835] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314837] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   13.314841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314843] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   13.314847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314849] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   13.314852] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314855] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   13.314858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314861] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   13.314864] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314867] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   13.314870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314873] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   13.314876] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314879] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   13.314882] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.314885] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   13.314888] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   13.315761] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.550427] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.550432] cfg80211: World regulatory domain updated:
[   13.550435] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.550438] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.550442] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.550445] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.550448] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.550451] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.623768] rts_pstor: device scan complete
[   13.623905] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   13.623958] Bad LUN (0:1)
[   13.624040] Bad target number (1:0)
[   13.624110] Bad target number (2:0)
[   13.624179] Bad target number (3:0)
[   13.624247] Bad target number (4:0)
[   13.624316] Bad target number (5:0)
[   13.624384] Bad target number (6:0)
[   13.624452] Bad target number (7:0)
[   13.624927] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   13.625544] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   13.704524] ieee80211 phy1: Selected rate control algorithm 'ath9k_rate_control'
[   13.705280] Registered led device: ath9k-phy1
[   13.705291] ieee80211 phy1: Atheros AR9485 Rev:1 mem=0xf9900000, irq=18
[   13.842173] type=1400 audit(1351626576.386:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[   13.842213] type=1400 audit(1351626576.386:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
[   13.842807] type=1400 audit(1351626576.386:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[   13.842850] type=1400 audit(1351626576.386:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
[   13.843163] type=1400 audit(1351626576.386:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[   13.843210] type=1400 audit(1351626576.386:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
[   13.843867] type=1400 audit(1351626576.390:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
[   13.844506] type=1400 audit(1351626576.390:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[   13.844868] type=1400 audit(1351626576.390:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[   13.845643] type=1400 audit(1351626576.390:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=780 comm="apparmor_parser"
[   14.299270] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.299351] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.299403] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   14.531406] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.531512] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.727368] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.128510] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   16.292208] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[   16.292219] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   16.292234] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   16.296562] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[   16.296572] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   16.296587] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[   16.458332] init: failsafe main process (978) killed by TERM signal
[   18.076018] ppdev: user-space parallel port driver
[   19.290402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.290406] Bluetooth: BNEP filters: protocol multicast
[   19.689514] Bluetooth: RFCOMM TTY layer initialized
[   19.689520] Bluetooth: RFCOMM socket layer initialized
[   19.689523] Bluetooth: RFCOMM ver 1.11
[   20.109789] init: lightdm main process (1161) killed by TERM signal
[   23.551143] r8169 0000:01:00.0: eth0: link down
[   23.551344] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.552112] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.554747] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.800716] init: plymouth-stop pre-start process (1403) terminated with status 1
[   62.882433] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
[   62.882442] ata1.00: irq_stat 0x40000008
[   62.882451] ata1.00: failed command: READ FPDMA QUEUED
[   62.882464] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   62.882467]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   62.882474] ata1.00: status: { DRDY ERR }
[   62.882478] ata1.00: error: { UNC }
[   62.887270] ata1.00: configured for UDMA/100
[   62.887285] ata1: EH complete
[   66.037157] ata1.00: exception Emask 0x0 SAct 0x7f SErr 0x0 action 0x0
[   66.037166] ata1.00: irq_stat 0x40000008
[   66.037174] ata1.00: failed command: READ FPDMA QUEUED
[   66.037188] ata1.00: cmd 60/08:10:a8:84:76/00:00:10:00:00/40 tag 2 ncq 4096 in
[   66.037190]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   66.037197] ata1.00: status: { DRDY ERR }
[   66.037202] ata1.00: error: { UNC }
[   66.042061] ata1.00: configured for UDMA/100
[   66.042087] ata1: EH complete
[   69.169628] ata1.00: exception Emask 0x0 SAct 0x58 SErr 0x0 action 0x0
[   69.169636] ata1.00: irq_stat 0x40000008
[   69.169644] ata1.00: failed command: READ FPDMA QUEUED
[   69.169658] ata1.00: cmd 60/08:20:a8:84:76/00:00:10:00:00/40 tag 4 ncq 4096 in
[   69.169661]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   69.169667] ata1.00: status: { DRDY ERR }
[   69.169672] ata1.00: error: { UNC }
[   69.221414] ata1.00: configured for UDMA/100
[   69.221438] ata1: EH complete
[   72.368748] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[   72.368757] ata1.00: irq_stat 0x40000008
[   72.368764] ata1.00: failed command: READ FPDMA QUEUED
[   72.368779] ata1.00: cmd 60/08:08:a8:84:76/00:00:10:00:00/40 tag 1 ncq 4096 in
[   72.368782]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   72.368789] ata1.00: status: { DRDY ERR }
[   72.368793] ata1.00: error: { UNC }
[   72.373544] ata1.00: configured for UDMA/100
[   72.373563] ata1: EH complete
[   75.478959] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   75.478968] ata1.00: irq_stat 0x40000008
[   75.478975] ata1.00: failed command: READ FPDMA QUEUED
[   75.478989] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   75.478992]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   75.478999] ata1.00: status: { DRDY ERR }
[   75.479003] ata1.00: error: { UNC }
[   75.483824] ata1.00: configured for UDMA/100
[   75.483846] ata1: EH complete
[   78.589245] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   78.589254] ata1.00: irq_stat 0x40000008
[   78.589262] ata1.00: failed command: READ FPDMA QUEUED
[   78.589275] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   78.589278]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   78.589285] ata1.00: status: { DRDY ERR }
[   78.589290] ata1.00: error: { UNC }
[   78.594053] ata1.00: configured for UDMA/100
[   78.594077] sd 0:0:0:0: [sda] Unhandled sense code
[   78.594081] sd 0:0:0:0: [sda]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   78.594089] sd 0:0:0:0: [sda]  Sense Key : Medium Error [current] [descriptor]
[   78.594099] Descriptor sense data with sense descriptors (in hex):
[   78.594104]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   78.594126]         10 76 84 ac 
[   78.594136] sd 0:0:0:0: [sda]  Add. Sense: Unrecovered read error - auto reallocate failed
[   78.594149] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 10 76 84 a8 00 00 08 00
[   78.594170] end_request: I/O error, dev sda, sector 276202668
[   78.594190] ata1: EH complete
[   81.810599] ata1.00: exception Emask 0x0 SAct 0x360 SErr 0x0 action 0x0
[   81.810609] ata1.00: irq_stat 0x40000008
[   81.810617] ata1.00: failed command: READ FPDMA QUEUED
[   81.810631] ata1.00: cmd 60/08:28:a8:84:76/00:00:10:00:00/40 tag 5 ncq 4096 in
[   81.810634]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   81.810641] ata1.00: status: { DRDY ERR }
[   81.810645] ata1.00: error: { UNC }
[   81.866628] ata1.00: configured for UDMA/100
[   81.866653] ata1: EH complete
[   84.998555] ata1.00: exception Emask 0x0 SAct 0xc SErr 0x0 action 0x0
[   84.998564] ata1.00: irq_stat 0x40000008
[   84.998572] ata1.00: failed command: READ FPDMA QUEUED
[   84.998585] ata1.00: cmd 60/08:18:a8:84:76/00:00:10:00:00/40 tag 3 ncq 4096 in
[   84.998588]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   84.998595] ata1.00: status: { DRDY ERR }
[   84.998600] ata1.00: error: { UNC }
[   85.003344] ata1.00: configured for UDMA/100
[   85.003363] ata1: EH complete
[   88.108859] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[   88.108867] ata1.00: irq_stat 0x40000008
[   88.108875] ata1.00: failed command: READ FPDMA QUEUED
[   88.108888] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   88.108891]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   88.108898] ata1.00: status: { DRDY ERR }
[   88.108902] ata1.00: error: { UNC }
[   88.113808] ata1.00: configured for UDMA/100
[   88.113828] ata1: EH complete
[   91.241327] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[   91.241336] ata1.00: irq_stat 0x40000008
[   91.241344] ata1.00: failed command: READ FPDMA QUEUED
[   91.241357] ata1.00: cmd 60/08:08:a8:84:76/00:00:10:00:00/40 tag 1 ncq 4096 in
[   91.241360]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   91.241367] ata1.00: status: { DRDY ERR }
[   91.241371] ata1.00: error: { UNC }
[   91.246292] ata1.00: configured for UDMA/100
[   91.246312] ata1: EH complete
[   94.351582] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   94.351591] ata1.00: irq_stat 0x40000008
[   94.351598] ata1.00: failed command: READ FPDMA QUEUED
[   94.351612] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   94.351615]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   94.351621] ata1.00: status: { DRDY ERR }
[   94.351626] ata1.00: error: { UNC }
[   94.356380] ata1.00: configured for UDMA/100
[   94.356398] ata1: EH complete
[   97.461833] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   97.461841] ata1.00: irq_stat 0x40000008
[   97.461848] ata1.00: failed command: READ FPDMA QUEUED
[   97.461862] ata1.00: cmd 60/08:00:a8:84:76/00:00:10:00:00/40 tag 0 ncq 4096 in
[   97.461864]          res 41/40:00:ac:84:76/00:00:10:00:00/40 Emask 0x409 (media error) <F>
[   97.461871] ata1.00: status: { DRDY ERR }
[   97.461876] ata1.00: error: { UNC }
[   97.466721] ata1.00: configured for UDMA/100
[   97.466745] sd 0:0:0:0: [sda] Unhandled sense code
[   97.466750] sd 0:0:0:0: [sda]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   97.466757] sd 0:0:0:0: [sda]  Sense Key : Medium Error [current] [descriptor]
[   97.466767] Descriptor sense data with sense descriptors (in hex):
[   97.466772]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[   97.466795]         10 76 84 ac 
[   97.466804] sd 0:0:0:0: [sda]  Add. Sense: Unrecovered read error - auto reallocate failed
[   97.466824] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 10 76 84 a8 00 00 08 00
[   97.466835] end_request: I/O error, dev sda, sector 276202668
[   97.466854] ata1: EH complete
[  121.104649] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[  121.104660] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f7428690), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[  121.104675] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f7428a80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[  132.557729] PPP BSD Compression module registered
[  132.559669] PPP Deflate Compression module registered

[SteveRiley]

Something's funky with your disk...quite a lot of read errors. Could be the drive itself, could be a cable. Let's take a look at your disk's heath statistics.

First, install the package that contains a utility to view a disk's SMART info:

sudo apt-get install --no-install-recommends smartmontools

Next, run this command and paste the output here:

sudo smartctl -a /dev/sda

[Wayne]

My hard drive has some empty unpartitioned space where Windows 7 used to be. Haven't done anything with it, 'cause I don't need the space just yet. Perhaps this could have something to do with the situation? My laptop is less than 3 months old and still under warranty. If there are problems with the drive, I should take it back.

But first, here are those statistics:

wayne@Wayne-CQ57:~/Documents$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-32-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, [url]http://smartmontools.sourceforge.net[/url]

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HTS543232A7A384
Serial Number:    E20342432P89TJ
LU WWN Device Id: 5 000cca 694e5da04
Firmware Version: ES2OA60W
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Wed Oct 31 14:04:32 2012 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   45) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  95) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   094   071   062    Pre-fail  Always       -       786444
  2 Throughput_Performance  0x0025   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0023   253   100   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1250
  5 Reallocated_Sector_Ct   0x0033   044   044   005    Pre-fail  Always       -       154 (0, 154)
  7 Seek_Error_Rate         0x002f   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       551
 10 Spin_Retry_Count        0x0033   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       155
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       118051661479936
188 Command_Timeout         0x0032   100   096   000    Old_age   Always       -       203
190 Airflow_Temperature_Cel 0x0022   056   052   045    Old_age   Always       -       44 (Min/Max 20/44)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       222
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       393222
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       18738
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       169
197 Current_Pending_Sector  0x0032   053   051   000    Old_age   Always       -       1314
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       0
223 Load_Retry_Count        0x002a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 1250 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1250 occurred at disk power-on lifetime: 550 hours (22 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 ac 84 76 00  Error: UNC at LBA = 0x007684ac = 7767212

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 a8 84 76 40 00      00:01:40.598  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:01:40.598  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 00      00:01:40.596  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:01:40.596  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      00:01:40.596  SET FEATURES [Reserved for Serial ATA]

Error 1249 occurred at disk power-on lifetime: 550 hours (22 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 ac 84 76 00  Error: UNC at LBA = 0x007684ac = 7767212

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 28 a8 84 76 40 00      00:01:37.421  READ FPDMA QUEUED
  60 10 20 f8 f9 f6 40 00      00:01:37.421  READ FPDMA QUEUED
  60 20 18 38 61 ba 40 00      00:01:37.420  READ FPDMA QUEUED
  60 08 10 78 5c b7 40 00      00:01:37.420  READ FPDMA QUEUED
  60 08 08 00 1a 1a 40 00      00:01:37.420  READ FPDMA QUEUED

Error 1248 occurred at disk power-on lifetime: 550 hours (22 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 ac 84 76 00  Error: UNC at LBA = 0x007684ac = 7767212

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 28 00 58 02 40 00      00:01:34.310  READ FPDMA QUEUED
  60 08 20 00 1a 1a 40 00      00:01:34.310  READ FPDMA QUEUED
  60 08 18 78 5c b7 40 00      00:01:34.310  READ FPDMA QUEUED
  60 20 10 38 61 ba 40 00      00:01:34.310  READ FPDMA QUEUED
  60 10 08 f8 f9 f6 40 00      00:01:34.310  READ FPDMA QUEUED

Error 1247 occurred at disk power-on lifetime: 550 hours (22 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 ac 84 76 00  Error: UNC at LBA = 0x007684ac = 7767212

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 30 40 c0 fb b8 40 00      00:01:30.945  READ FPDMA QUEUED
  60 10 38 f8 f9 f6 40 00      00:01:30.945  READ FPDMA QUEUED
  60 20 30 38 61 ba 40 00      00:01:30.944  READ FPDMA QUEUED
  60 08 28 78 5c b7 40 00      00:01:30.944  READ FPDMA QUEUED
  60 08 20 00 1a 1a 40 00      00:01:30.944  READ FPDMA QUEUED

Error 1246 occurred at disk power-on lifetime: 550 hours (22 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 ac 84 76 00  Error: UNC at LBA = 0x007684ac = 7767212

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 a8 84 76 40 00      00:01:27.809  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:01:27.808  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 00      00:01:27.806  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      00:01:27.806  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      00:01:27.806  SET FEATURES [Reserved for Serial ATA]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         2         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[oshunluvr]

IMO, that drive is failing. I would backup anything you don't want to lose and do it now. In comparison, I have a three year old drive that still shows ZERO for Raw_Read_Error_Rate, Reallocated_Sector_Ct, and Reallocated_Event_Count.

[Wayne]

Yep. It seems you're right:


Alright, I'm taking it back to the store. Thank you for your help, guys.

[SteveRiley]

Glad we could help!