Announcement

Collapse
No announcement yet.

Wireless not working with Centrino Advanced-N 6205

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wireless not working with Centrino Advanced-N 6205

    Hello,
    I have a problem with my wirelesscard. With Windows 7 all works fine. With Kubuntu, wireless doesn't work with a wpa key. Uncrypted connections work fine.

    Here some Infos:
    lspci:
    Code:
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
    03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
    0d:00.0 System peripheral: Ricoh Co Ltd MMC/SD Host Controller (rev 08)
    0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04)
    ifconfig
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:21:cc:6c:4f:aa  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:37633 errors:0 dropped:0 overruns:0 frame:0
              TX packets:24452 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:50108939 (50.1 MB)  TX bytes:2842267 (2.8 MB)
              Interrupt:20 Memory:f2600000-f2620000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4175 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4175 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:330615 (330.6 KB)  TX bytes:330615 (330.6 KB)
    
    wlan0     Link encap:Ethernet  HWaddr 08:11:96:64:04:90  
              inet addr:10.0.0.16  Bcast:10.0.0.255  Mask:255.255.255.0
              inet6 addr: fe80::a11:96ff:fe64:490/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1228 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1054 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:262016 (262.0 KB)  TX bytes:192673 (192.6 KB)
    iwconfig:
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:21:cc:6c:4f:aa  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:37633 errors:0 dropped:0 overruns:0 frame:0
              TX packets:24452 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:50108939 (50.1 MB)  TX bytes:2842267 (2.8 MB)
              Interrupt:20 Memory:f2600000-f2620000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4175 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4175 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:330615 (330.6 KB)  TX bytes:330615 (330.6 KB)
    
    wlan0     Link encap:Ethernet  HWaddr 08:11:96:64:04:90  
              inet addr:10.0.0.16  Bcast:10.0.0.255  Mask:255.255.255.0
              inet6 addr: fe80::a11:96ff:fe64:490/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1228 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1054 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:262016 (262.0 KB)  TX bytes:192673 (192.6 KB)
    Code:
    Module                  Size  Used by
    bnep                   18281  2 
    rfcomm                 47604  0 
    parport_pc             32866  0 
    ppdev                  17113  0 
    binfmt_misc            17540  1 
    joydev                 17693  0 
    snd_hda_codec_hdmi     32474  1 
    snd_hda_codec_conexant    62128  1 
    btusb                  18288  0 
    bluetooth             180104  11 bnep,rfcomm,btusb
    arc4                   12529  2 
    snd_hda_intel          33773  5 
    snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
    snd_hwdep              13668  1 snd_hda_codec
    snd_pcm                97188  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    snd_seq_midi           13324  0 
    snd_rawmidi            30748  1 snd_seq_midi
    cdc_wdm                17581  0 
    cdc_acm                26858  0 
    cdc_ncm                17399  0 
    usbnet                 26212  1 cdc_ncm
    thinkpad_acpi          81819  0 
    snd_seq_midi_event     14899  1 snd_seq_midi
    nvram                  14413  1 thinkpad_acpi
    snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
    psmouse                87692  0 
    serio_raw              13211  0 
    tpm_tis                18804  0 
    iwlwifi               328352  0 
    mac80211              506816  1 iwlwifi
    cfg80211              205544  2 iwlwifi,mac80211
    snd_timer              29990  2 snd_pcm,snd_seq
    snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
    mac_hid                13253  0 
    mei                    41616  0 
    snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,thinkpad_acpi,snd_seq,snd_timer,snd_seq_device
    soundcore              15091  1 snd
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    lp                     17799  0 
    parport                46562  3 parport_pc,ppdev,lp
    i915                  468764  3 
    drm_kms_helper         46978  1 i915
    drm                   242038  4 i915,drm_kms_helper
    i2c_algo_bit           13423  1 i915
    video                  19596  1 i915
    wmi                    19256  0 
    e1000e                156693  0 
    firewire_ohci          41000  0 
    sdhci_pci              18826  0 
    firewire_core          63558  1 firewire_ohci
    sdhci                  33205  1 sdhci_pci
    crc_itu_t              12707  1 firewire_core
    Your advice would be most appreciated!

    #2
    Elmntee:

    So, the wireless DOES work, but not with encryption enabled. Correct?

    If unencrypted wireless works, then the hardware is OK. It is now a case of choosing the correct encryption method, and giving it the correct password.

    I wireless does not work AT ALL, then we have a different item to troubleshoot.

    Frank.
    Linux: Powerful, open, elegant. Its all I use.

    Comment


      #3
      You're right. Wireless is working, but the problem is, that the wpa encryption doesn't work.(The password is also correct).

      So I can only connect with uncrypted Networks. (WEP I haven't tried, but is no alternative).

      Elmnteee

      Comment


        #4
        OK, then lets try this:

        Left click the network icon in the 'Kicker' (the panel on the lower right of the screen)
        Left click "Manage Connections"
        In the "Wireless" tab, left click the network you are trying to connect to, then click "Edit"

        On the "Wireless Security" tab you should get something like the screenshot I have attached. What is selected for "Security"?

        Frank.Click image for larger version

Name:	Snapshot6.jpg
Views:	1
Size:	12.8 KB
ID:	639976
        Linux: Powerful, open, elegant. Its all I use.

        Comment


          #5
          WPA/WPA2 Personal... Password is also correct. BSSID and MAC are empty and Mode is Infrastructure. The setting are correct.

          Do I have to install any package? The wpa_supplicant is preinstalled. So I pressume it should work, but it doesn't

          Btw thanks for your help

          Comment


            #6
            OK, can we back up one step and try something else?

            Select the network you want to connect to, and delete it from the list. Then click the "Add" button.

            Now go to the "Wireless" tab and click the 'scan' button. You should get a little graphic of the networks that are close to you. Select the one you want to connect to. The boxes for the Connection name, and SSID shuld be filled in automatically. Just under the connection name, click the "Connect Automatically" box. Now go to the Wireless Security tab, and fill in again the correct password. It is case sensitive.

            Click 'OK' until you are back out of the Network Manager setup utility.

            Now try to connect. Does it work now?

            Frank.
            Last edited by Frank616; Jun 10, 2012, 03:10 PM.
            Linux: Powerful, open, elegant. Its all I use.

            Comment


              #7
              No doesn't help, still not working. Settings should be right.

              Comment


                #8
                If the password is correct, including the case of the password, then we've now gone beyond my level of 'expertise'. Perhaps someone else will jump in at this point.

                Sorry I couldn't get it working for you.

                Frank.
                Linux: Powerful, open, elegant. Its all I use.

                Comment


                  #9
                  first let me say I'm not sure just what the prob may be ...........but let me go out on a limb hear.

                  when I first got this laptop and was still on 11.04 although my wireless would come up and seem to be working it would not connect to anything (fairly new wireless card as yours seems to be ) and I had to find the source code and compile the driver my self.

                  then when I upgraded to 11.10 it worked "out the box" without having to monkey around with things.

                  my point being that even though 12.04 has a driver "module" for your card it may not be exactly right yet.

                  when googleing for your card I got several hits at the Ubuntu forums with fixes but for slow connections not no wpa.

                  just how up to date is your install?

                  do a
                  Code:
                  sudo apt-get update && sudo apt-get dist-upgrade
                  and see if you get any updated packages especially kernels and if this fixes any thing!!

                  if not I will point you to a thread that will tell you how to get the vary latest kernel that will run on 12.04 (whitch may have a better module for you)

                  VINNY
                  i7 4core HT 8MB L3 2.9GHz
                  16GB RAM
                  Nvidia GTX 860M 4GB RAM 1152 cuda cores

                  Comment


                    #10
                    Something else to consider. He says that his wireless connection works fine if set to unencrypted. Also, that the wireless works in Windows 7.

                    What we haven't been told, is what the routers wireless security is set to? If it's set to WEP and he is trying to use WPA in the connection manager, it isn't going to work.
                    Windows no longer obstructs my view.
                    Using Kubuntu Linux since March 23, 2007.
                    "It is a capital mistake to theorize before one has data." - Sherlock Holmes

                    Comment


                      #11
                      Okay the routers wireless setting is of course wpa too. (Checked it again and would be ashamed it hadn't been)

                      Tried to update and it's still not working. I just found on the internet that it's official supported and that it's not necessary to load any additional drivers...

                      Thanks for helping,

                      Elmnteee

                      Comment


                        #12
                        Which WPA -- personal (PSK) or enterprise (802.1X/RADIUS)?

                        Comment


                          #13
                          personal

                          Comment


                            #14
                            if your feeling adventuress go hear http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4.1-quantal/ and download the 3 .deb's (and I do meen all 3)for your arc. that is amd64 or i386 dependig on wether you use a 64bit system or not AND the linux-headers-3.4.1-030401_3.4.1-030401.201206041411_all.deb then go to where thay were downloaded to in dolphen and tools>terminal (this will open the terminal their) then do

                            Code:
                            sudo dpkg -i linux*3.4.1*.deb
                            this will install all of it in one shot and reboot then maby .....just maby it will have better support for your wireless device .

                            I'v been using this kernel for a little wile now and it's ok hear ......but should it barf on you just reboot again and select your curent kernel at the grub boot screen when you reboot.

                            VINNY
                            i7 4core HT 8MB L3 2.9GHz
                            16GB RAM
                            Nvidia GTX 860M 4GB RAM 1152 cuda cores

                            Comment


                              #15
                              Still not working...

                              Comment

                              Working...
                              X