Greetings,
I tried installing the proprietary ATI/AMD drivers version 12.8. When I did so, X did not start and I have to purge the .deb packages I created/installed and re-install version 12.6. I have a switchable graphics system with an ATI 4200 embedded along with an ATI 5600 discreet adapter on an HP Pavilion DV6 with an AMD 64 processor. I would like to know what happened so that X would not start. (I tried a few times to install version 12.8 ).
I am not sure, but it seems like the X server is simply shutting down the monitor.
Any ideas what is going on?
I tried installing the proprietary ATI/AMD drivers version 12.8. When I did so, X did not start and I have to purge the .deb packages I created/installed and re-install version 12.6. I have a switchable graphics system with an ATI 4200 embedded along with an ATI 5600 discreet adapter on an HP Pavilion DV6 with an AMD 64 processor. I would like to know what happened so that X would not start. (I tried a few times to install version 12.8 ).
I am not sure, but it seems like the X server is simply shutting down the monitor.
Code:
[ 22.856] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.856] X Protocol Version 11, Revision 0 [ 22.856] Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu [ 22.856] Current Operating System: Linux kubuntu-64 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 [ 22.856] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=98fef471-56cb-4a15-9494-686381fda9eb ro resume=/dev/sda4 quiet splash vt.handoff=7 [ 22.856] Build Date: 04 August 2012 01:51:23AM [ 22.856] xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) [ 22.856] Current version of pixman: 0.24.4 [ 22.856] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.856] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 25 19:17:50 2012 [ 22.919] (==) Using config file: "/etc/X11/xorg.conf" [ 22.919] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 23.002] (==) ServerLayout "amdcccle Layout" [ 23.002] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 23.002] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 23.145] (**) | |-->Device "aticonfig-Device[0]-0" [ 23.145] (**) |-->Screen "aticonfig-Screen[1]-0" (1) [ 23.145] (**) | |-->Monitor "aticonfig-Monitor[1]-0" [ 23.146] (**) | |-->Device "aticonfig-Device[1]-0" [ 23.146] (==) Automatically adding devices [ 23.146] (==) Automatically enabling devices [ 23.227] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 23.227] Entry deleted from font path. [ 23.227] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 23.227] Entry deleted from font path. [ 23.252] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 23.252] Entry deleted from font path. [ 23.252] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 23.252] Entry deleted from font path. [ 23.252] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/75dpi, built-ins [ 23.252] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 23.252] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 23.252] (II) Loader magic: 0x7fe8b5d5cb00 [ 23.252] (II) Module ABI versions: [ 23.252] X.Org ANSI C Emulation: 0.4 [ 23.252] X.Org Video Driver: 11.0 [ 23.252] X.Org XInput driver : 16.0 [ 23.252] X.Org Server Extension : 6.0 [ 23.253] (--) PCI:*(0:1:5:0) 1002:9712:103c:1440 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/65536, 0xf0300000/1048576, I/O @ 0x00004000/256 [ 23.253] (--) PCI: (0:2:0:0) 1002:68c1:103c:1440 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072 [ 23.253] (II) Open ACPI successful (/var/run/acpid.socket) [ 23.254] (II) "extmod" will be loaded by default. [ 23.254] (II) "dbe" will be loaded by default. [ 23.254] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 23.254] (II) "record" will be loaded by default. [ 23.254] (II) "dri" will be loaded by default. [ 23.254] (II) "dri2" will be loaded by default. [ 23.254] (II) LoadModule: "glx" [ 23.487] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 23.757] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 23.757] compiled for 6.9.0, module version = 1.0.0 [ 23.757] (II) Loading extension GLX [ 23.757] (II) LoadModule: "extmod" [ 23.860] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 23.905] (II) Module extmod: vendor="X.Org Foundation" [ 23.905] compiled for 1.11.3, module version = 1.0.0 [ 23.905] Module class: X.Org Server Extension [ 23.905] ABI class: X.Org Server Extension, version 6.0 [ 23.905] (II) Loading extension MIT-SCREEN-SAVER [ 23.905] (II) Loading extension XFree86-VidModeExtension [ 23.905] (II) Loading extension XFree86-DGA [ 23.905] (II) Loading extension DPMS [ 23.905] (II) Loading extension XVideo [ 23.905] (II) Loading extension XVideo-MotionCompensation [ 23.905] (II) Loading extension X-Resource [ 23.905] (II) LoadModule: "dbe" [ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 23.938] (II) Module dbe: vendor="X.Org Foundation" [ 23.938] compiled for 1.11.3, module version = 1.0.0 [ 23.938] Module class: X.Org Server Extension [ 23.938] ABI class: X.Org Server Extension, version 6.0 [ 23.938] (II) Loading extension DOUBLE-BUFFER [ 23.938] (II) LoadModule: "record" [ 23.939] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 23.953] (II) Module record: vendor="X.Org Foundation" [ 23.953] compiled for 1.11.3, module version = 1.13.0 [ 23.953] Module class: X.Org Server Extension [ 23.953] ABI class: X.Org Server Extension, version 6.0 [ 23.954] (II) Loading extension RECORD [ 23.954] (II) LoadModule: "dri" [ 23.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 23.967] (II) Module dri: vendor="X.Org Foundation" [ 23.967] compiled for 1.11.3, module version = 1.0.0 [ 23.967] ABI class: X.Org Server Extension, version 6.0 [ 23.967] (II) Loading extension XFree86-DRI [ 23.967] (II) LoadModule: "dri2" [ 23.967] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 23.982] (II) Module dri2: vendor="X.Org Foundation" [ 23.982] compiled for 1.11.3, module version = 1.2.0 [ 23.982] ABI class: X.Org Server Extension, version 6.0 [ 23.982] (II) Loading extension DRI2 [ 23.982] (II) LoadModule: "fglrx" [ 23.982] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 24.867] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 24.867] compiled for 1.4.99.906, module version = 8.98.2 [ 24.867] Module class: X.Org Video Driver [ 24.868] (II) Loading sub module "fglrxdrm" [ 24.868] (II) LoadModule: "fglrxdrm" [ 24.868] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so [ 24.934] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 24.934] compiled for 1.4.99.906, module version = 8.98.2 [ 24.958] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2 [ 24.958] (II) AMD Proprietary Linux Driver Release Identifier: 8.982 [ 24.958] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56 [ 24.958] (++) using VT number 7 [ 24.958] (WW) Falling back to old probe method for fglrx [ 25.225] (II) Loading PCS database from /etc/ati/amdpcsdb [ 25.228] ukiDynamicMajor: found major device number 250 [ 25.228] ukiDynamicMajor: found major device number 250 [ 25.228] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 25.228] ukiOpenDevice: node name is /dev/ati/card0 [ 25.228] ukiOpenDevice: open result is 8, (OK) [ 25.229] ukiOpenByBusid: ukiOpenMinor returns 8 [ 25.229] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 25.252] (WW) PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode. [ 25.254] (--) Chipset Supported AMD Graphics Processor (0x68C1) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:0) found [ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found [ 25.264] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 25.264] (II) AMD Video driver is signed [ 25.265] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 25.265] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so [ 25.265] (II) fglrx(0): pEnt->device->identifier=0x7fe8b7328570 [ 25.265] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin [ 25.283] (WW) fglrx(0): PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode. [ 25.284] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 25.284] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 25.284] (==) fglrx(0): Default visual is TrueColor [ 25.284] (**) fglrx(0): Option "DPMS" "true" [ 25.284] (==) fglrx(0): RGB weight 888 [ 25.284] (II) fglrx(0): Using 8 bits per RGB [ 25.284] (==) fglrx(0): Buffer Tiling is ON [ 25.285] (II) Loading sub module "fglrxdrm" [ 25.285] (II) LoadModule: "fglrxdrm" [ 25.285] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so [ 25.285] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 25.285] compiled for 1.4.99.906, module version = 8.98.2 [ 25.287] ukiDynamicMajor: found major device number 250 [ 25.287] ukiDynamicMajor: found major device number 250 [ 25.287] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 25.287] ukiOpenDevice: node name is /dev/ati/card0 [ 25.287] ukiOpenDevice: open result is 13, (OK) [ 25.287] ukiOpenByBusid: ukiOpenMinor returns 13 [ 25.287] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 25.287] (**) fglrx(0): NoAccel = NO [ 25.287] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 25.287] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1) [ 25.287] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1440) [ 25.287] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 25.287] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 [ 25.287] (--) fglrx(0): MMIO registers at 0xf0200000 [ 25.287] (--) fglrx(0): I/O port at 0x00003000 [ 25.287] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 25.309] (II) fglrx(0): ATIF platform detected [ 25.310] (II) fglrx(0): AC Adapter is used [ 25.773] (II) fglrx(0): AMD Video BIOS revision 9 or later detected [ 25.773] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3 [ 25.773] (II) fglrx(0): PCIE card detected [ 25.773] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 25.773] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 25.788] (II) fglrx(0): Using adapter: 2:0.0. [ 25.798] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) [ 25.809] (II) fglrx(0): Interrupt handler installed at IRQ 45. [ 25.809] (II) fglrx(0): RandR 1.2 support is enabled! [ 25.809] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 25.809] (==) fglrx(0): Center Mode is disabled [ 25.809] (II) Loading sub module "fb" [ 25.809] (II) LoadModule: "fb" [ 25.809] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.942] (II) Module fb: vendor="X.Org Foundation" [ 25.942] compiled for 1.11.3, module version = 1.0.0 [ 25.942] ABI class: X.Org ANSI C Emulation, version 0.4 [ 25.942] (II) Loading sub module "ddc" [ 25.942] (II) LoadModule: "ddc" [ 25.942] (II) Module "ddc" already built-in [ 26.210] (II) fglrx(0): Finished Initialize PPLIB! [ 26.232] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[1]-0 [ 26.233] (II) fglrx(0): Output DFP1 has no monitor section [ 26.233] (II) fglrx(0): Output CRT1 has no monitor section [ 26.233] (II) Loading sub module "ddc" [ 26.233] (II) LoadModule: "ddc" [ 26.233] (II) Module "ddc" already built-in [ 26.233] (II) fglrx(0): Connected Display0: LVDS [ 26.233] (II) fglrx(0): Display0 EDID data --------------------------- [ 26.233] (II) fglrx(0): Manufacturer: SEC Model: 3651 Serial#: 0 [ 26.233] (II) fglrx(0): Year: 2008 Week: 0 [ 26.233] (II) fglrx(0): EDID Version: 1.3 [ 26.233] (II) fglrx(0): Digital Display Input [ 26.233] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 26.233] (II) fglrx(0): Gamma: 2.20 [ 26.233] (II) fglrx(0): No DPMS capabilities specified [ 26.233] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 26.233] (II) fglrx(0): First detailed timing is preferred mode [ 26.233] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 26.233] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 26.233] (II) fglrx(0): Manufacturer's mask: 0 [ 26.233] (II) fglrx(0): Supported detailed timing: [ 26.233] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 26.233] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0 [ 26.233] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0 [ 26.233] (II) fglrx(0): Unknown vendor-specific block f [ 26.233] (II) fglrx(0): SAMSUNG [ 26.233] (II) fglrx(0): 156AT05-H01 [ 26.233] (II) fglrx(0): EDID (in hex): [ 26.233] (II) fglrx(0): 00ffffffffffff004ca3513600000000 [ 26.233] (II) fglrx(0): 00120103802213780a87f594574f8c27 [ 26.233] (II) fglrx(0): 27505400000001010101010101010101 [ 26.233] (II) fglrx(0): 010101010101121b567250000c303020 [ 26.233] (II) fglrx(0): 250058c2100000190000000f00000000 [ 26.233] (II) fglrx(0): 00000000001eb4027400000000fe0053 [ 26.233] (II) fglrx(0): 414d53554e470a2020202020000000fe [ 26.233] (II) fglrx(0): 00313536415430352d4830310a200015 [ 26.233] (II) fglrx(0): End of Display0 EDID data -------------------- [ 26.234] (II) fglrx(0): EDID for output LVDS [ 26.234] (II) fglrx(0): Manufacturer: SEC Model: 3651 Serial#: 0 [ 26.234] (II) fglrx(0): Year: 2008 Week: 0 [ 26.234] (II) fglrx(0): EDID Version: 1.3 [ 26.234] (II) fglrx(0): Digital Display Input [ 26.234] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 26.234] (II) fglrx(0): Gamma: 2.20 [ 26.234] (II) fglrx(0): No DPMS capabilities specified [ 26.234] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 26.234] (II) fglrx(0): First detailed timing is preferred mode [ 26.234] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 26.234] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 26.234] (II) fglrx(0): Manufacturer's mask: 0 [ 26.234] (II) fglrx(0): Supported detailed timing: [ 26.234] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 26.234] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0 [ 26.234] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0 [ 26.234] (II) fglrx(0): Unknown vendor-specific block f [ 26.234] (II) fglrx(0): SAMSUNG [ 26.234] (II) fglrx(0): 156AT05-H01 [ 26.234] (II) fglrx(0): EDID (in hex): [ 26.234] (II) fglrx(0): 00ffffffffffff004ca3513600000000 [ 26.234] (II) fglrx(0): 00120103802213780a87f594574f8c27 [ 26.234] (II) fglrx(0): 27505400000001010101010101010101 [ 26.234] (II) fglrx(0): 010101010101121b567250000c303020 [ 26.234] (II) fglrx(0): 250058c2100000190000000f00000000 [ 26.234] (II) fglrx(0): 00000000001eb4027400000000fe0053 [ 26.234] (II) fglrx(0): 414d53554e470a2020202020000000fe [ 26.234] (II) fglrx(0): 00313536415430352d4830310a200015 [ 26.234] (II) fglrx(0): EDID vendor "SEC", prod id 13905 [ 26.234] (II) fglrx(0): Printing DDC gathered Modelines: [ 26.234] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Printing probed modes for output LVDS [ 26.234] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1414 1446 1480 720 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1414 1446 1480 600 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1414 1446 1480 600 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1414 1446 1480 480 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1414 1446 1480 480 770 775 780 -hsync -vsync (46.8 kHz) [ 26.234] (II) fglrx(0): EDID for output DFP1 [ 26.234] (II) fglrx(0): EDID for output CRT1 [ 26.234] (II) fglrx(0): Output LVDS connected [ 26.234] (II) fglrx(0): Output DFP1 disconnected [ 26.234] (II) fglrx(0): Output CRT1 disconnected [ 26.234] (II) fglrx(0): Using exact sizes for initial modes [ 26.234] (II) fglrx(0): Output LVDS using initial mode 1366x768 [ 26.234] (II) fglrx(0): Display dimensions: (340, 190) mm [ 26.234] (II) fglrx(0): DPI set to (102, 102) [ 26.234] (II) fglrx(0): Eyefinity capable adapter detected. [ 26.234] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected. [ 26.234] (==) fglrx(0): PseudoColor visuals disabled [ 26.234] (II) Loading sub module "ramdac" [ 26.234] (II) LoadModule: "ramdac" [ 26.234] (II) Module "ramdac" already built-in [ 26.234] (==) fglrx(0): NoDRI = NO [ 26.234] (==) fglrx(0): Capabilities: 0x00000000 [ 26.234] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 26.235] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 26.235] (==) fglrx(0): UseFastTLS=0 [ 26.235] (--) Depth 24 pixmap format is 32 bpp [ 26.235] (II) Loading extension ATIFGLRXDRI [ 26.235] (II) fglrx(0): doing swlDriScreenInit [ 26.235] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 26.235] ukiDynamicMajor: found major device number 250 [ 26.235] ukiDynamicMajor: found major device number 250 [ 26.235] ukiDynamicMajor: found major device number 250 [ 26.235] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 26.235] ukiOpenDevice: node name is /dev/ati/card0 [ 26.235] ukiOpenDevice: open result is 14, (OK) [ 26.235] ukiOpenByBusid: ukiOpenMinor returns 14 [ 26.235] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 26.235] (II) fglrx(0): [uki] DRM interface version 1.0 [ 26.235] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0" [ 26.235] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 26.235] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fe8b595f000 [ 26.235] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 26.235] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 26.235] (II) fglrx(0): swlDriScreenInit done [ 26.235] (II) fglrx(0): Kernel Module Version Information: [ 26.235] (II) fglrx(0): Name: fglrx [ 26.235] (II) fglrx(0): Version: 8.98.2 [ 26.235] (II) fglrx(0): Date: Jul 27 2012 [ 26.235] (II) fglrx(0): Desc: AMD FireGL DRM kernel module [ 26.235] (II) fglrx(0): Kernel Module version matches driver. [ 26.235] (II) fglrx(0): Kernel Module Build Time Information: [ 26.235] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-29-generic [ 26.235] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 26.235] (II) fglrx(0): Build-Kernel __SMP__: yes [ 26.235] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 26.235] (II) fglrx(0): [uki] register handle = 0x00004000 [ 26.322] (II) fglrx(0): DRI initialization successfull [ 26.362] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000 [ 26.406] (==) fglrx(0): Backing store disabled [ 26.406] (II) Loading extension FGLRXEXTENSION [ 26.406] (**) fglrx(0): DPMS enabled [ 26.407] (II) fglrx(0): Initialized in-driver Xinerama extension [ 26.407] (**) fglrx(0): Textured Video is enabled. [ 26.407] (II) LoadModule: "glesx" [ 26.407] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so [ 26.681] (II) Module glesx: vendor="X.Org Foundation" [ 26.681] compiled for 1.4.99.906, module version = 1.0.0 [ 26.681] (II) Loading extension GLESX [ 26.681] (II) fglrx(0): GLESX enableFlags = 592 [ 26.698] (II) fglrx(0): GLESX is enabled [ 26.698] (II) LoadModule: "amdxmm" [ 26.698] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so [ 26.748] (II) Module amdxmm: vendor="X.Org Foundation" [ 26.748] compiled for 1.4.99.906, module version = 2.0.0 [ 26.757] (II) Loading extension AMDXVOPL [ 26.757] (II) Loading extension AMDXVBA [ 26.797] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 26.808] (II) fglrx(0): Enable composite support successfully [ 26.808] (WW) fglrx(0): Option "VendorName" is not used [ 26.808] (WW) fglrx(0): Option "ModelName" is not used [ 26.808] (II) fglrx(0): X context handle = 0x1 [ 26.808] (II) fglrx(0): [DRI] installation complete [ 26.808] (==) fglrx(0): Silken mouse enabled [ 26.809] (==) fglrx(0): Using HW cursor of display infrastructure! [ 26.809] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. [ 26.809] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' [ 26.809] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 27.897] (--) RandR disabled [ 27.897] (II) Initializing built-in extension Generic Event Extension [ 27.897] (II) Initializing built-in extension SHAPE [ 27.897] (II) Initializing built-in extension MIT-SHM [ 27.897] (II) Initializing built-in extension XInputExtension [ 27.897] (II) Initializing built-in extension XTEST [ 27.897] (II) Initializing built-in extension BIG-REQUESTS [ 27.897] (II) Initializing built-in extension SYNC [ 27.897] (II) Initializing built-in extension XKEYBOARD [ 27.897] (II) Initializing built-in extension XC-MISC [ 27.897] (II) Initializing built-in extension SECURITY [ 27.898] (II) Initializing built-in extension XINERAMA [ 27.898] (II) Initializing built-in extension XFIXES [ 27.898] (II) Initializing built-in extension RENDER [ 27.898] (II) Initializing built-in extension RANDR [ 27.898] (II) Initializing built-in extension COMPOSITE [ 27.898] (II) Initializing built-in extension DAMAGE [ 28.011] ukiDynamicMajor: found major device number 250 [ 28.012] ukiDynamicMajor: found major device number 250 [ 28.012] ukiOpenByBusid: Searching for BusID PCI:2:0:0 [ 28.012] ukiOpenDevice: node name is /dev/ati/card0 [ 28.012] ukiOpenDevice: open result is 16, (OK) [ 28.012] ukiOpenByBusid: ukiOpenMinor returns 16 [ 28.012] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 [ 30.070] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 30.070] (II) fglrx(0): Enable the clock gating! [ 30.070] (II) fglrx(0): Setting screen physical size to 361 x 203 [ 30.251] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 30.263] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 30.263] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.263] (II) LoadModule: "evdev" [ 30.264] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.293] (II) Module evdev: vendor="X.Org Foundation" [ 30.293] compiled for 1.11.3, module version = 2.7.0 [ 30.293] Module class: X.Org XInput Driver [ 30.293] ABI class: X.Org XInput driver, version 16.0 [ 30.293] (II) Using input driver 'evdev' for 'Power Button' [ 30.293] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.293] (**) Power Button: always reports core events [ 30.293] (**) evdev: Power Button: Device: "/dev/input/event2" [ 30.293] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 30.293] (--) evdev: Power Button: Found keys [ 30.293] (II) evdev: Power Button: Configuring as keyboard [ 30.293] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 30.293] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 30.293] (**) Option "xkb_rules" "evdev" [ 30.293] (**) Option "xkb_model" "pc105" [ 30.293] (**) Option "xkb_layout" "us" [ 30.293] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 30.294] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 30.294] (II) Using input driver 'evdev' for 'Video Bus' [ 30.294] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.294] (**) Video Bus: always reports core events [ 30.294] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 30.294] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 30.294] (--) evdev: Video Bus: Found keys [ 30.294] (II) evdev: Video Bus: Configuring as keyboard [ 30.294] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4" [ 30.294] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 30.294] (**) Option "xkb_rules" "evdev" [ 30.294] (**) Option "xkb_model" "pc105" [ 30.294] (**) Option "xkb_layout" "us" [ 30.294] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 30.294] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 30.294] (II) Using input driver 'evdev' for 'Video Bus' [ 30.294] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.294] (**) Video Bus: always reports core events [ 30.294] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 30.294] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 30.294] (--) evdev: Video Bus: Found keys [ 30.294] (II) evdev: Video Bus: Configuring as keyboard [ 30.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5/event5" [ 30.295] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 30.295] (**) Option "xkb_rules" "evdev" [ 30.295] (**) Option "xkb_model" "pc105" [ 30.295] (**) Option "xkb_layout" "us" [ 30.295] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 30.295] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.295] (II) Using input driver 'evdev' for 'Power Button' [ 30.295] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.295] (**) Power Button: always reports core events [ 30.295] (**) evdev: Power Button: Device: "/dev/input/event0" [ 30.295] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 30.295] (--) evdev: Power Button: Found keys [ 30.295] (II) evdev: Power Button: Configuring as keyboard [ 30.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 30.295] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 30.295] (**) Option "xkb_rules" "evdev" [ 30.295] (**) Option "xkb_model" "pc105" [ 30.295] (**) Option "xkb_layout" "us" [ 30.296] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 30.296] (II) No input driver specified, ignoring this device. [ 30.296] (II) This device may have been added with another device file. [ 30.296] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13) [ 30.296] (II) No input driver specified, ignoring this device. [ 30.296] (II) This device may have been added with another device file. [ 30.297] (II) config/udev: Adding input device HP Webcam (/dev/input/event10) [ 30.297] (**) HP Webcam: Applying InputClass "evdev keyboard catchall" [ 30.297] (II) Using input driver 'evdev' for 'HP Webcam' [ 30.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.297] (**) HP Webcam: always reports core events [ 30.297] (**) evdev: HP Webcam: Device: "/dev/input/event10" [ 30.297] (--) evdev: HP Webcam: Vendor 0x64e Product 0xf209 [ 30.297] (--) evdev: HP Webcam: Found keys [ 30.297] (II) evdev: HP Webcam: Configuring as keyboard [ 30.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10/event10" [ 30.297] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 10) [ 30.297] (**) Option "xkb_rules" "evdev" [ 30.297] (**) Option "xkb_model" "pc105" [ 30.297] (**) Option "xkb_layout" "us" [ 30.297] (II) config/udev: Adding input device reserved Dynex Watermelon Wireless Mice (/dev/input/event6) [ 30.297] (**) reserved Dynex Watermelon Wireless Mice: Applying InputClass "evdev pointer catchall" [ 30.297] (II) Using input driver 'evdev' for 'reserved Dynex Watermelon Wireless Mice' [ 30.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.298] (**) reserved Dynex Watermelon Wireless Mice: always reports core events [ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: Device: "/dev/input/event6" [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Vendor 0x19ff Product 0x225 [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found 9 mouse buttons [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found scroll wheel(s) [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found relative axes [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found x and y relative axes [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found absolute axes [ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found absolute multitouch axes [ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Forcing absolute x/y axes to exist. [ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Configuring as mouse [ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Adding scrollwheel support [ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: YAxisMapping: buttons 4 and 5 [ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 30.298] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6/event6" [ 30.298] (II) XINPUT: Adding extended input device "reserved Dynex Watermelon Wireless Mice" (type: MOUSE, id 11) [ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: initialized for relative axes. [ 30.298] (WW) evdev: reserved Dynex Watermelon Wireless Mice: ignoring absolute axes. [ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) keeping acceleration scheme 1 [ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration profile 0 [ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration factor: 2.000 [ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration threshold: 4 [ 30.298] (II) config/udev: Adding input device reserved Dynex Watermelon Wireless Mice (/dev/input/mouse0) [ 30.298] (II) No input driver specified, ignoring this device. [ 30.298] (II) This device may have been added with another device file. [ 30.299] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event11) [ 30.299] (II) No input driver specified, ignoring this device. [ 30.299] (II) This device may have been added with another device file. [ 30.299] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event12) [ 30.299] (II) No input driver specified, ignoring this device. [ 30.299] (II) This device may have been added with another device file. [ 30.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 30.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 30.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 30.299] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.299] (**) AT Translated Set 2 keyboard: always reports core events [ 30.299] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 30.299] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 30.299] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 30.299] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 30.299] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 30.299] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 30.299] (**) Option "xkb_rules" "evdev" [ 30.299] (**) Option "xkb_model" "pc105" [ 30.299] (**) Option "xkb_layout" "us" [ 30.300] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9) [ 30.300] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 30.300] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 30.300] (II) LoadModule: "synaptics" [ 30.301] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 30.318] (II) Module synaptics: vendor="X.Org Foundation" [ 30.318] compiled for 1.11.3, module version = 1.6.2 [ 30.318] Module class: X.Org XInput Driver [ 30.318] ABI class: X.Org XInput driver, version 16.0 [ 30.318] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 30.318] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 30.318] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 30.318] (**) Option "Device" "/dev/input/event9" [ 30.320] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 30.320] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672 [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550 [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 30.320] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 30.324] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9" [ 30.324] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038 [ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 30.324] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 30.325] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 30.325] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 30.325] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8) [ 30.325] (II) No input driver specified, ignoring this device. [ 30.325] (II) This device may have been added with another device file. [ 30.325] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 30.325] (II) No input driver specified, ignoring this device. [ 30.325] (II) This device may have been added with another device file. [ 30.327] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) [ 30.327] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 30.327] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 30.327] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.327] (**) HP WMI hotkeys: always reports core events [ 30.327] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7" [ 30.327] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 30.327] (--) evdev: HP WMI hotkeys: Found keys [ 30.327] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 30.327] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7" [ 30.327] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14) [ 30.327] (**) Option "xkb_rules" "evdev" [ 30.327] (**) Option "xkb_model" "pc105" [ 30.327] (**) Option "xkb_layout" "us" [ 30.356] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 87.328] (II) AIGLX: Suspending AIGLX clients for VT switch [ 87.328] (II) fglrx(0): Backup framebuffer data. [ 87.333] (II) fglrx(0): Backup complete. [ 316.393] (II) evdev: HP WMI hotkeys: Close [ 316.393] (II) UnloadModule: "evdev" [ 316.393] (II) Unloading evdev [ 316.393] (II) UnloadModule: "synaptics" [ 316.393] (II) Unloading synaptics [ 316.393] (II) evdev: AT Translated Set 2 keyboard: Close [ 316.393] (II) UnloadModule: "evdev" [ 316.393] (II) Unloading evdev [ 316.393] (II) evdev: reserved Dynex Watermelon Wireless Mice: Close [ 316.393] (II) UnloadModule: "evdev" [ 316.393] (II) Unloading evdev [ 316.393] (II) evdev: HP Webcam: Close [ 316.393] (II) UnloadModule: "evdev" [ 316.393] (II) Unloading evdev [ 316.393] (II) evdev: Power Button: Close [ 316.393] (II) UnloadModule: "evdev" [ 316.393] (II) Unloading evdev [ 316.394] (II) evdev: Video Bus: Close [ 316.394] (II) UnloadModule: "evdev" [ 316.394] (II) Unloading evdev [ 316.394] (II) evdev: Video Bus: Close [ 316.394] (II) UnloadModule: "evdev" [ 316.394] (II) Unloading evdev [ 316.394] (II) evdev: Power Button: Close [ 316.394] (II) UnloadModule: "evdev" [ 316.394] (II) Unloading evdev [ 316.405] (II) fglrx(0): Shutdown CMMQS [ 316.405] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 316.405] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fe8b595f000 [ 316.407] (II) fglrx(0): Interrupt handler Shutdown. [ 316.430] ddxSigGiveUp: Closing log [ 316.430] Server terminated successfully (0). Closing log file.
Comment