Venus Fast2 Modem is Not Working

[Guest]

Sorry if I do a double post. I've post this topic in Ubuntu Forums, but I got no answer. So, I try my luck here I've problem with my Venus Fast2 modem. When I try to view my modem using "lsusb" in terminal, Linux recognize it as a storage device. I've try to use commands
"sudo usb_modeswitch -c /etc/usb_modeswitch.d/venus_fast2"
where for the contents of the venus_fast2 file is like this:

# Venus Fast2 (white)

DefaultVendor=0x05c6
DefaultProduct=0×1000

TargetVendor=0x19f5
TargetProduct=0×9909

CheckSuccess=20

MessageContent=”55534243105c838a000000000000061e00 0000010000000000000000000000″
NeedResponse=1

The output that I got after running the above command is something like this:

Looking for target devices …
No devices in target mode or class found
Looking for default devices …
Found devices in default mode, class or configuration (1)
Accessing device 004 on bus 006 …
Getting the current device configuration …
Error getting the current configuration (error -110). Assuming configuration 1.
Using endpoints 0×09 (out) and 0×88 (in)
Inquiring device details; driver will be detached …
Looking for active driver …
No driver found. Either detached before or never attached

Can anyone help me to fix my problem??
Thanks in advance and forgive me for my poor English.

[jpenguin]

Re: Venus Fast2 Modem is Not Working

http://kaliphonia.com/content/notes/...lts-lucid-lynx

[Guest]

Re: Venus Fast2 Modem is Not Working

http://kaliphonia.com/content/notes/...lts-lucid-lynx

It doesn't work. It's gave the same error as my previous post.
Anyway thanks for the solution

[jpenguin]

Re: Venus Fast2 Modem is Not Working

Re: Modem connect nggk fast2 venus in ubuntu 11:10 Site is in Indonesian, so you will want to have it translated.