Announcement

Collapse
No announcement yet.

Audio CDs only work in non-KDE apps

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Audio CDs only work in non-KDE apps

    I can't use audio CDs (data CDs are fine) in KDE-based apps. The Plasma Device Notifier doesn't "see" them. They do show up in Dolphin, but appear empty/broken/unmountable (size unknown). Non-KDE apps like the Sound-Juicer or Asunder rippers work immediately and as expected. Any ideas?

    #2
    Re: Audio CDs only work in non-KDE apps

    have you tried kscd?

    Comment


      #3
      Re: Audio CDs only work in non-KDE apps

      kscd gets the correct track list, but won't play or seek.

      Comment


        #4
        Re: Audio CDs only work in non-KDE apps

        any logged errors? Try inserting a CD and looking at the output of dmesg in a terminal. Also helpful error output can be obtained by launching an app from within a terminal.

        Please Read Me

        Comment


          #5
          Re: Audio CDs only work in non-KDE apps

          dmesg:

          [ 423.379981] Buffer I/O error on device sr0, logical block 8
          [ 423.450118] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
          [ 423.450125] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
          [ 423.450130] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
          [ 423.450138] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00
          [ 423.450146] end_request: I/O error, dev sr0, sector 64
          [ 423.450151] Buffer I/O error on device sr0, logical block 8

          (repeats)

          Edit: Doesn't something like that *always* show up for "non-filesystem" CDs, even if there aren't any problem? Can't quite remember.

          --------------------

          kscd:

          (nothing)

          --------------------

          Dolphin:

          Advanced probing on /dev/sr0 failed while reading block size

          (repeats)

          --------------------

          soundKonverter WORKS:

          Checking /dev/scd0 for cdrom...
          Testing /dev/scd0 for SCSI/MMC interface
          SG_IO device: /dev/sr0

          CDROM model sensed sensed: TSSTcorp CDDVDW SH-S202J SB02

          Checking for SCSI emulation...
          Drive is ATAPI (using SG_IO host adaptor emulation)

          Checking for MMC style command set...
          Drive is MMC style
          DMA scatter/gather table entries: 1
          table entry size: 524288 bytes
          maximum theoretical transfer: 222 sectors
          Setting default read size to 27 sectors (63504 bytes).

          Verifying CDDA command set...
          Expected command set reads OK.

          --------------------

          Clementine:

          Device added: "Gio/unmounted/154847376"
          Mount/unmount error: Location is not mountable
          Mount/unmount error: Location is not mountable
          Mount/unmount error: Location is not mountable

          --------------------

          K3b WORKS:

          command: "READ TOC/PMA/ATIP (43)"
          errorcode: "70"
          sense key: "ILLEGAL REQUEST (5)"
          asc: "24"
          ascq: "0"
          k3b(4935) K3b:evice:evice::readTocPmaAtip: (K3b:evice:evice) "/dev/sr0" : READ TOC/PMA/ATIP length det failed.
          k3b(4935) K3b:evice:evice::readTocPmaAtip: (K3b:evice:evice) "/dev/sr0" : READ TOC/PMA/ATIP invalid length returned: 4
          k3b(4935) K3b:evice:evice::readRawToc: Session | ADR | CONTROL| TNO | POINT | Min | Sec | Frame | Zero | PMIN | PSEC | PFRAME |
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | a0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | a1 | 0 | 0 | 0 | 0 | 12 | 0 | 0 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | a2 | 0 | 0 | 0 | 0 | 57 | 13 | 15 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 2 | 0 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 2 | 0 | 0 | 0 | 0 | 5 | 2 | 2 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 3 | 0 | 0 | 0 | 0 | 9 | 9 | 42 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 4 | 0 | 0 | 0 | 0 | 13 | 21 | 7 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 5 | 0 | 0 | 0 | 0 | 17 | 48 | 25 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 6 | 0 | 0 | 0 | 0 | 23 | 30 | 37 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 7 | 0 | 0 | 0 | 0 | 26 | 45 | 40 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 8 | 0 | 0 | 0 | 0 | 31 | 45 | 47 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | 9 | 0 | 0 | 0 | 0 | 34 | 57 | 52 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | a | 0 | 0 | 0 | 0 | 41 | 56 | 67 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | b | 0 | 0 | 0 | 0 | 46 | 35 | 52 |"
          k3b(4935) K3b:evice:evice::readRawToc: " 1 | 1 | 0 | 0 | c | 0 | 0 | 0 | 0 | 50 | 20 | 35 |"
          k3b(4935) K3b:evice:evice::rawTocDataWithBcdValues: (K3b:evice:evice) found invalid bcd values. No bcd toc.
          k3b(4935) K3b:evice:evice::readRawToc: "/dev/sr0" : setting last sector of last track to 257339
          k3b(4935) K3b:evice::ScsiCommand::debugError: (K3b:evice::ScsiCommand) failed:
          command: "READ TOC/PMA/ATIP (43)"
          errorcode: "70"
          sense key: "ILLEGAL REQUEST (5)"
          asc: "24"
          ascq: "0"
          k3b(4935) K3b:evice:evice::readTocPmaAtip: (K3b:evice:evice) "/dev/sr0" : READ TOC/PMA/ATIP length det failed.
          k3b(4935) K3b:evice:evice::readTocPmaAtip: (K3b:evice:evice) "/dev/sr0" : READ TOC/PMA/ATIP invalid length returned: 4
          k3b(4935) K3b:evice::CdText::setRawPackData: (K3b:evice::CdText) zero-sized CD-TEXT: 0
          k3b(4935) K3b:evice:eviceManager:rintDevices: Devices:
          ------------------------------
          k3b(4935) K3b:evice:eviceManager:rintDevices: Blockdevice: "/dev/sr0"
          Vendor: "TSSTcorp"
          Description: "CDDVDW SH-S202J"
          Version: "SB02"
          Write speed: 22160
          Profiles: "dvd-ROM, DVD-R sequentieel, DVD-R Dual Layer sequentieel, DVD-R Dual Layer Jump, dvd-RAM, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+R Dual Layer, cd-ROM, CD-R, CD-RW"
          Read Cap: "dvd-ROM, dvd-R, DVD-R sequentieel, DVD-R Dual Layer, DVD-R Dual Layer sequentieel, DVD-R Dual Layer Jump, DVD-RW, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, cd-ROM, CD-R, CD-RW"
          Write Cap: "dvd-R, DVD-R sequentieel, DVD-R Dual Layer, DVD-R Dual Layer Jump, DVD-RW, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW"
          Writing modes: "SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Beperkt overschrijven, Layer Jump"
          ------------------------------
          k3b(4935) K3b::TitleLabel::updatePositioning: 22 22
          k3b(4935) K3b::PlacesModel::slotDevicesChanged:
          k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_projects" with KXMLGUIFactory!
          k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_dir_tree" with KXMLGUIFactory!
          k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_contents" with KXMLGUIFactory!
          k3b(4935)/kdeui (kdelibs): Attempt to use QAction "location_bar" with KXMLGUIFactory!
          k3b(4935) K3b::FileTreeView::setSelectedUrl:
          k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect/")
          k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect") will be expanded.
          k3b(4935) K3b::FileTreeView::slotExpandUrl:
          k3b(4935) K3b:irView::showUrl: KUrl("file:///mnt/collect/")
          k3b(4935) K3b:irView::slotDirActivated: KUrl("file:///mnt/collect/")
          k3b(4935) K3b::FileView::setUrl: KUrl("file:///mnt/collect/")
          k3b(4935) K3b::FileTreeView::setSelectedUrl:
          k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect/")
          k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect") will be expanded.
          k3b(4935) K3b::FileTreeView::slotExpandUrl:
          k3b(4935) K3b::CDDB::CDDBJob::start:
          k3b(4935) KCDDB::MusicBrainzLookup::cacheFiles: Cache files found: 4
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          k3b(4935) K3b::SystemProblemDialog::checkSystem: (K3b::Core) System problems:
          k3b(4935) K3b::SystemProblemDialog::checkSystem: - none -
          Advanced probing on /dev/sr0 failed while reading block size
          Advanced probing on /dev/sr0 failed while reading block size
          k3b(4935) KSambaSharePrivate::testparmParamValue: Running testparm ("-d0", "-s", "--parameter-name", "usershare path")

          --------------------

          asunder WORKS:

          (nothing)

          Comment


            #6
            Re: Audio CDs only work in non-KDE apps

            So I take it this isn't happening to anyone else here?

            Comment


              #7
              Re: Audio CDs only work in non-KDE apps

              I reinstalled from a fresh 11.10 beta CD.
              Now the Device Notifier sees audio CDs, but as "CD-ROM" and with the only option being "Play Audio CD with Amarok". (I don't have Amarok...)
              Dolphin still doesn't know what to do with audio CDs.
              Clementine doesn't see them at all now.
              soundKonverter and k3B still work.

              Comment


                #8
                Re: Audio CDs only work in non-KDE apps

                The floppy disk drive isn't visible or usable either... that might be related or not

                Comment


                  #9
                  Re: Audio CDs only work in non-KDE apps

                  Originally posted by abalone
                  So I take it this isn't happening to anyone else here?
                  It's happening here as well, but this is nothing new. I never had any luck playiong CD's with Amarok, or Clementine.
                  Usually the first thing I do is install KSCD, but this time it isn't working either.

                  kscd gets the correct track list, but won't play or seek.
                  Same here.

                  Comment


                    #10
                    Re: Audio CDs only work in non-KDE apps

                    What about the Device Notifier widget and Dolphin's/Konqueror's audiocd:/ thingie?

                    Comment


                      #11
                      Re: Audio CDs only work in non-KDE apps

                      Originally posted by abalone
                      What about the Device Notifier widget and Dolphin's/Konqueror's audiocd:/ thingie?
                      The device notifier pops up when inserting an audio CD, and gives me a choice of playing the CD with Amarok.
                      Same problem in Dolphin.
                      I get 2 folders.
                      Full CD
                      Information.
                      Clicking on Full CD does nothing.
                      Clicking on Information gives me 2 text files, when clicked on I get an error saying these files do not exist

                      Comment


                        #12
                        Re: Audio CDs only work in non-KDE apps

                        Thanks. It's exactly the same for me. It wasn't like that before, though. (Before what? I'm not sure.)

                        Comment


                          #13
                          Re: Audio CDs only work in non-KDE apps

                          While you're here, could you click on my username and see if my e-mail adress is showing?
                          If it is it's a problem

                          Comment


                            #14
                            Re: Audio CDs only work in non-KDE apps

                            Just ensure that in your Personal CP that under Account Related Settings that Hide email address from public? is checked.
                            Windows no longer obstructs my view.
                            Using Kubuntu Linux since March 23, 2007.
                            "It is a capital mistake to theorize before one has data." - Sherlock Holmes

                            Comment


                              #15
                              Re: Audio CDs only work in non-KDE apps

                              Originally posted by Snowhog
                              Just ensure that in your Personal CP that under Account Related Settings that Hide email address from public? is checked.
                              That's the problem, it is checked, and yet it is showing up under my username

                              Comment

                              Working...
                              X