I can't use audio CDs (data CDs are fine) in KDE-based apps. The Plasma Device Notifier doesn't "see" them. They do show up in Dolphin, but appear empty/broken/unmountable (size unknown). Non-KDE apps like the Sound-Juicer or Asunder rippers work immediately and as expected. Any ideas?
Announcement
Collapse
No announcement yet.
Audio CDs only work in non-KDE apps
Collapse
This topic is closed.
X
X
-
Re: Audio CDs only work in non-KDE apps
any logged errors? Try inserting a CD and looking at the output of dmesg in a terminal. Also helpful error output can be obtained by launching an app from within a terminal.
- Top
- Bottom
Comment
-
Re: Audio CDs only work in non-KDE apps
dmesg:
[ 423.379981] Buffer I/O error on device sr0, logical block 8
[ 423.450118] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 423.450125] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 423.450130] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 423.450138] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 10 00 00 02 00
[ 423.450146] end_request: I/O error, dev sr0, sector 64
[ 423.450151] Buffer I/O error on device sr0, logical block 8
(repeats)
Edit: Doesn't something like that *always* show up for "non-filesystem" CDs, even if there aren't any problem? Can't quite remember.
--------------------
kscd:
(nothing)
--------------------
Dolphin:
Advanced probing on /dev/sr0 failed while reading block size
(repeats)
--------------------
soundKonverter WORKS:
Checking /dev/scd0 for cdrom...
Testing /dev/scd0 for SCSI/MMC interface
SG_IO device: /dev/sr0
CDROM model sensed sensed: TSSTcorp CDDVDW SH-S202J SB02
Checking for SCSI emulation...
Drive is ATAPI (using SG_IO host adaptor emulation)
Checking for MMC style command set...
Drive is MMC style
DMA scatter/gather table entries: 1
table entry size: 524288 bytes
maximum theoretical transfer: 222 sectors
Setting default read size to 27 sectors (63504 bytes).
Verifying CDDA command set...
Expected command set reads OK.
--------------------
Clementine:
Device added: "Gio/unmounted/154847376"
Mount/unmount error: Location is not mountable
Mount/unmount error: Location is not mountable
Mount/unmount error: Location is not mountable
--------------------
K3b WORKS:
command: "READ TOC/PMA/ATIP (43)"
errorcode: "70"
sense key: "ILLEGAL REQUEST (5)"
asc: "24"
ascq: "0"
k3b(4935) K3b:evice:
evice::readTocPmaAtip: (K3b:
evice:
evice) "/dev/sr0" : READ TOC/PMA/ATIP length det failed.
k3b(4935) K3b:evice:
evice::readTocPmaAtip: (K3b:
evice:
evice) "/dev/sr0" : READ TOC/PMA/ATIP invalid length returned: 4
k3b(4935) K3b:evice:
evice::readRawToc: Session | ADR | CONTROL| TNO | POINT | Min | Sec | Frame | Zero | PMIN | PSEC | PFRAME |
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | a0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | a1 | 0 | 0 | 0 | 0 | 12 | 0 | 0 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | a2 | 0 | 0 | 0 | 0 | 57 | 13 | 15 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 2 | 0 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 2 | 0 | 0 | 0 | 0 | 5 | 2 | 2 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 3 | 0 | 0 | 0 | 0 | 9 | 9 | 42 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 4 | 0 | 0 | 0 | 0 | 13 | 21 | 7 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 5 | 0 | 0 | 0 | 0 | 17 | 48 | 25 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 6 | 0 | 0 | 0 | 0 | 23 | 30 | 37 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 7 | 0 | 0 | 0 | 0 | 26 | 45 | 40 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 8 | 0 | 0 | 0 | 0 | 31 | 45 | 47 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | 9 | 0 | 0 | 0 | 0 | 34 | 57 | 52 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | a | 0 | 0 | 0 | 0 | 41 | 56 | 67 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | b | 0 | 0 | 0 | 0 | 46 | 35 | 52 |"
k3b(4935) K3b:evice:
evice::readRawToc: " 1 | 1 | 0 | 0 | c | 0 | 0 | 0 | 0 | 50 | 20 | 35 |"
k3b(4935) K3b:evice:
evice::rawTocDataWithBcdValues: (K3b:
evice:
evice) found invalid bcd values. No bcd toc.
k3b(4935) K3b:evice:
evice::readRawToc: "/dev/sr0" : setting last sector of last track to 257339
k3b(4935) K3b:evice::ScsiCommand::debugError: (K3b:
evice::ScsiCommand) failed:
command: "READ TOC/PMA/ATIP (43)"
errorcode: "70"
sense key: "ILLEGAL REQUEST (5)"
asc: "24"
ascq: "0"
k3b(4935) K3b:evice:
evice::readTocPmaAtip: (K3b:
evice:
evice) "/dev/sr0" : READ TOC/PMA/ATIP length det failed.
k3b(4935) K3b:evice:
evice::readTocPmaAtip: (K3b:
evice:
evice) "/dev/sr0" : READ TOC/PMA/ATIP invalid length returned: 4
k3b(4935) K3b:evice::CdText::setRawPackData: (K3b:
evice::CdText) zero-sized CD-TEXT: 0
k3b(4935) K3b:evice:
eviceManager:
rintDevices: Devices:
------------------------------
k3b(4935) K3b:evice:
eviceManager:
rintDevices: Blockdevice: "/dev/sr0"
Vendor: "TSSTcorp"
Description: "CDDVDW SH-S202J"
Version: "SB02"
Write speed: 22160
Profiles: "dvd-ROM, DVD-R sequentieel, DVD-R Dual Layer sequentieel, DVD-R Dual Layer Jump, dvd-RAM, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+R Dual Layer, cd-ROM, CD-R, CD-RW"
Read Cap: "dvd-ROM, dvd-R, DVD-R sequentieel, DVD-R Dual Layer, DVD-R Dual Layer sequentieel, DVD-R Dual Layer Jump, DVD-RW, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, cd-ROM, CD-R, CD-RW"
Write Cap: "dvd-R, DVD-R sequentieel, DVD-R Dual Layer, DVD-R Dual Layer Jump, DVD-RW, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW"
Writing modes: "SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Beperkt overschrijven, Layer Jump"
------------------------------
k3b(4935) K3b::TitleLabel::updatePositioning: 22 22
k3b(4935) K3b::PlacesModel::slotDevicesChanged:
k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_projects" with KXMLGUIFactory!
k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_dir_tree" with KXMLGUIFactory!
k3b(4935)/kdeui (kdelibs): Attempt to use QAction "view_contents" with KXMLGUIFactory!
k3b(4935)/kdeui (kdelibs): Attempt to use QAction "location_bar" with KXMLGUIFactory!
k3b(4935) K3b::FileTreeView::setSelectedUrl:
k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect/")
k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect") will be expanded.
k3b(4935) K3b::FileTreeView::slotExpandUrl:
k3b(4935) K3b:irView::showUrl: KUrl("file:///mnt/collect/")
k3b(4935) K3b:irView::slotDirActivated: KUrl("file:///mnt/collect/")
k3b(4935) K3b::FileView::setUrl: KUrl("file:///mnt/collect/")
k3b(4935) K3b::FileTreeView::setSelectedUrl:
k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect/")
k3b(4935) K3b::PlacesModel::expandToUrl: KUrl("file:///mnt/collect") will be expanded.
k3b(4935) K3b::FileTreeView::slotExpandUrl:
k3b(4935) K3b::CDDB::CDDBJob::start:
k3b(4935) KCDDB::MusicBrainzLookup::cacheFiles: Cache files found: 4
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
k3b(4935) K3b::SystemProblemDialog::checkSystem: (K3b::Core) System problems:
k3b(4935) K3b::SystemProblemDialog::checkSystem: - none -
Advanced probing on /dev/sr0 failed while reading block size
Advanced probing on /dev/sr0 failed while reading block size
k3b(4935) KSambaSharePrivate::testparmParamValue: Running testparm ("-d0", "-s", "--parameter-name", "usershare path")
--------------------
asunder WORKS:
(nothing)
- Top
- Bottom
Comment
-
Re: Audio CDs only work in non-KDE apps
I reinstalled from a fresh 11.10 beta CD.
Now the Device Notifier sees audio CDs, but as "CD-ROM" and with the only option being "Play Audio CD with Amarok". (I don't have Amarok...)
Dolphin still doesn't know what to do with audio CDs.
Clementine doesn't see them at all now.
soundKonverter and k3B still work.
- Top
- Bottom
Comment
-
Re: Audio CDs only work in non-KDE apps
Originally posted by abaloneSo I take it this isn't happening to anyone else here?
Usually the first thing I do is install KSCD, but this time it isn't working either.
kscd gets the correct track list, but won't play or seek.
- Top
- Bottom
Comment
-
Re: Audio CDs only work in non-KDE apps
Originally posted by abaloneWhat about the Device Notifier widget and Dolphin's/Konqueror's audiocd:/ thingie?
Same problem in Dolphin.
I get 2 folders.
Full CD
Information.
Clicking on Full CD does nothing.
Clicking on Information gives me 2 text files, when clicked on I get an error saying these files do not exist
- Top
- Bottom
Comment
-
Re: Audio CDs only work in non-KDE apps
Just ensure that in your Personal CP that under Account Related Settings that Hide email address from public? is checked.Windows no longer obstructs my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
- Top
- Bottom
Comment
Comment