Announcement

Collapse
No announcement yet.

Black Screen After Graphics Card Update

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Black Screen After Graphics Card Update

    Hi. I Upgrade My Graphics Card From ATI Radeon X1600 PCI-E to ATI Radeon HD5570...when boot to Kubuntu 11.04 I see only a black screen ? Why This Happen ? Please Help Me !

    #2
    Re: Black Screen After Graphics Card Update

    Hey there, I got the same problem.

    I upgraded from nvidia onboard graphics to radeon pci-e card HD5670.

    I boot up to the point it shows the 5 white dots and then the monitor goes to standby mode.

    FailsafeX does not work. StartX gives two errors:

    (EE) failed to load module "nvidia" (module does not exist, 0)
    (EE) No drivers available.


    It seems that mine is trying to load the nvidia drivers even though I uninstalled them. I'll probably need to edit xorg.conf or menu.lst or something. Weird thing is I can't deactivate the onboard vga. The bios has no such option...

    Try booting in recovery mode, and type: startx

    Maybe it will give you some useful information to start working with.

    good luck!!

    Comment


      #3
      Re: Black Screen After Graphics Card Update

      Originally posted by zahtar
      Weird thing is I can't deactivate the onboard vga. The bios has no such option...
      Hi...

      I worked on a system like this once and if I remember correctly, the BIOS auto detects (or should) any graphics cards that have been added and then turns off the onboard graphics accordingly.

      If you can get to the recovery console, try the commands given here. They might help.

      Regards...
      Our Lord and Savior Jesus Christ loves and cares about you most of all! http://peacewithgod.jesus.net/
      How do I know this personally? Please read here: https://www.linuxquestions.org/quest...hn-8-12-36442/
      PLEASE LISTEN TO THIS PODCAST! You don't have to end up here: https://soulchoiceministries.org/pod...i-see-in-hell/

      Comment


        #4
        Re: Black Screen After Graphics Card Update

        The bios has an option to specify the primary graphics adapter if multiple are present. onboard, pci-express, pci.

        Code:
        sudo dpkg-reconfigure xserver-xorg
        is something that I did try, but did nothing. But I didn't use the -phigh thing.

        Unfortunately I searched around and ended up editing xorg.conf before reading your post. This caused me other problems.

        I don't mean to highjack this thread, so if you could help me I would really appreciate it if you posted in the thread linked below. Thnx in advance!

        http://kubuntuforums.net/forums/inde...opic=3117305.0

        Comment

        Working...
        X