Announcement

Collapse
No announcement yet.

Lucid doesn't recognize/mount my camera

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Lucid doesn't recognize/mount my camera

    Hi,

    I have a ge a1235 digital camera. I connected it and device manager doesn't seem to see it. The camera itself says, "connection failed".

    /var/log/syslog says:

    [32858.230072] usb 2-5: new high speed USB device using ehci_hcd and address 7

    when it connects, and:

    [32881.349981] usb 2-5: USB disconnect, address 7

    after I shut it off.

    Here's the output from sudo lsusb -v
    (sorry about the code tags - I don't know how to make it scrollable)

    Code:
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0001 1.1 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ohci_hcd
 iProduct        2 OHCI Host Controller
 iSerial         1 0000:00:14.5
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0002 1x 2 bytes
    bInterval       255
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       2
 wHubCharacteristic 0x0012
  No power switching (usb 1.0)
  No overcurrent protection
 bPwrOn2PwrGood    2 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0001 1.1 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ohci_hcd
 iProduct        2 OHCI Host Controller
 iSerial         1 0000:00:13.1
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0002 1x 2 bytes
    bInterval       255
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       3
 wHubCharacteristic 0x0012
  No power switching (usb 1.0)
  No overcurrent protection
 bPwrOn2PwrGood    2 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0001 1.1 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ohci_hcd
 iProduct        2 OHCI Host Controller
 iSerial         1 0000:00:13.0
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0002 1x 2 bytes
    bInterval       255
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       3
 wHubCharacteristic 0x0012
  No power switching (usb 1.0)
  No overcurrent protection
 bPwrOn2PwrGood    2 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 004 Device 002: ID 062a:0252 Creative Labs 
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      0 (Defined at Interface level)
 bDeviceSubClass     0 
 bDeviceProtocol     0 
 bMaxPacketSize0     8
 idVendor      0x062a Creative Labs
 idProduct     0x0252 
 bcdDevice      0.00
 iManufacturer      1 Logitech 
 iProduct        2 USB WheelMouse   
 iSerial         0 
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      34
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xa0
   (Bus Powered)
   Remote Wakeup
  MaxPower       100mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     3 Human Interface Device
   bInterfaceSubClass   1 Boot Interface Subclass
   bInterfaceProtocol   2 Mouse
   iInterface       0 
    HID Device Descriptor:
     bLength         9
     bDescriptorType    33
     bcdHID        1.10
     bCountryCode      0 Not supported
     bNumDescriptors     1
     bDescriptorType    34 Report
     wDescriptorLength   61
     Report Descriptors: 
      ** UNAVAILABLE **
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0005 1x 5 bytes
    bInterval        2
Device Status:   0x0000
 (Bus Powered)

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0001 1.1 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ohci_hcd
 iProduct        2 OHCI Host Controller
 iSerial         1 0000:00:12.1
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0002 1x 2 bytes
    bInterval       255
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       3
 wHubCharacteristic 0x0012
  No power switching (usb 1.0)
  No overcurrent protection
 bPwrOn2PwrGood    2 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0103 power enable connect
  Port 3: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        1.10
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0001 1.1 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ohci_hcd
 iProduct        2 OHCI Host Controller
 iSerial         1 0000:00:12.0
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0002 1x 2 bytes
    bInterval       255
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       3
 wHubCharacteristic 0x0012
  No power switching (usb 1.0)
  No overcurrent protection
 bPwrOn2PwrGood    2 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 002 Device 010: ID 1b1e:9303 
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        2.00
 bDeviceClass      0 (Defined at Interface level)
 bDeviceSubClass     0 
 bDeviceProtocol     0 
 bMaxPacketSize0    64
 idVendor      0x1b1e 
 idProduct     0x9303 
 bcdDevice      0.10
 iManufacturer      1 GE
 iProduct        2 A1250
 iSerial         3 17B0JC0258
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      39
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xc0
   Self Powered
  MaxPower       100mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      3
   bInterfaceClass     6 Imaging
   bInterfaceSubClass   1 Still Image Capture
   bInterfaceProtocol   1 Picture Transfer Protocol (PIMA 15470)
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      2
     Transfer Type      Bulk
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0200 1x 512 bytes
    bInterval        0
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x02 EP 2 OUT
    bmAttributes      2
     Transfer Type      Bulk
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0200 1x 512 bytes
    bInterval        0
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x83 EP 3 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0040 1x 64 bytes
    bInterval       16
Device Qualifier (for other device speed):
 bLength        10
 bDescriptorType     6
 bcdUSB        2.00
 bDeviceClass      0 (Defined at Interface level)
 bDeviceSubClass     0 
 bDeviceProtocol     0 
 bMaxPacketSize0    64
 bNumConfigurations   1
Device Status:   0x0001
 Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        2.00
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0002 2.0 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ehci_hcd
 iProduct        2 EHCI Host Controller
 iSerial         1 0000:00:13.2
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0004 1x 4 bytes
    bInterval       12
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       6
 wHubCharacteristic 0x000a
  No power switching (usb 1.0)
  Per-port overcurrent protection
 bPwrOn2PwrGood    10 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
  Port 4: 0000.0100 power
  Port 5: 0000.0503 highspeed power enable connect
  Port 6: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength        18
 bDescriptorType     1
 bcdUSB        2.00
 bDeviceClass      9 Hub
 bDeviceSubClass     0 Unused
 bDeviceProtocol     0 Full speed (or root) hub
 bMaxPacketSize0    64
 idVendor      0x1d6b Linux Foundation
 idProduct     0x0002 2.0 root hub
 bcdDevice      2.06
 iManufacturer      3 Linux 2.6.35-23-generic ehci_hcd
 iProduct        2 EHCI Host Controller
 iSerial         1 0000:00:12.2
 bNumConfigurations   1
 Configuration Descriptor:
  bLength         9
  bDescriptorType     2
  wTotalLength      25
  bNumInterfaces     1
  bConfigurationValue   1
  iConfiguration     0 
  bmAttributes     0xe0
   Self Powered
   Remote Wakeup
  MaxPower        0mA
  Interface Descriptor:
   bLength         9
   bDescriptorType     4
   bInterfaceNumber    0
   bAlternateSetting    0
   bNumEndpoints      1
   bInterfaceClass     9 Hub
   bInterfaceSubClass   0 Unused
   bInterfaceProtocol   0 Full speed (or root) hub
   iInterface       0 
   Endpoint Descriptor:
    bLength         7
    bDescriptorType     5
    bEndpointAddress   0x81 EP 1 IN
    bmAttributes      3
     Transfer Type      Interrupt
     Synch Type        None
     Usage Type        Data
    wMaxPacketSize   0x0004 1x 4 bytes
    bInterval       12
Hub Descriptor:
 bLength        9
 bDescriptorType   41
 nNbrPorts       6
 wHubCharacteristic 0x000a
  No power switching (usb 1.0)
  Per-port overcurrent protection
 bPwrOn2PwrGood    10 * 2 milli seconds
 bHubContrCurrent   0 milli Ampere
 DeviceRemovable  0x00
 PortPwrCtrlMask  0xff
 Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
  Port 4: 0000.0100 power
  Port 5: 0000.0100 power
  Port 6: 0000.0100 power
Device Status:   0x0003
 Self Powered
 Remote Wakeup Enabled
    As you can see, the system sees it.

    My /etc/fstab doesn't have an entry for either camera or usb, but then it doesn't have one for the cd/dvd either, and that works fine. In fact, I tried to put one for the cdrom in there once and the system yelled at me for it.

    Oh, here's the configuration for camera in device notifier:

    [img width=383 height=400]http://img375.imageshack.us/img375/503/devicenotifiercamera.png[/img]

    Uploaded with ImageShack.us

    I hope someone has an idea what's going on - it worked perfectly in karmic.

    Oh, it doesn't show-up in dolphin or gwenview.
    MB:ASUS M3A78-EM AM2+/AM2 780G HDMI, Proc: Athlon 64 X2 5000+ Brisbane 2.6 GHz 2x512KB L2 Cache, Graph: Int. ATI Radeon HD 3200, Aud: Int. Realtek ALC1200 8 channels, Ram: 2GB Corsair XMS2 DDR2 800 SDRAM, Monitor: Dell SE198WFP 19" Wide FPM
    Tags: None
    • Top
    • Bottom
    #2
    Re: Lucid doesn't recognize/mount my camera

    I changed the device settings in system settings, device actions, for camera from what you see above, to:

    [img width=380 height=400]http://img375.imageshack.us/img375/2316/devicenotifiercamera2.png[/img]

    Uploaded with ImageShack.us

    and under system settings digital camera, a USB PTP Class camera shows-up, tests okay, and provides the following "information":

    Code:
    Manufacturer: GE 
Model: A1250 
 Version: 1.00
 Serial Number: 17B0JC0258

Capture Formats: JPEG
Display Formats: JPEG, Association/Directory

Device Capabilities:
	File Download, File Deletion, File Upload
	No Image Capture, No Open Capture, No vendor specific capture

Storage Devices Summary:
store_00010001:
	StorageDescription: None
	VolumeLabel: None
	Storage Type: Removable RAM (memory card)
	Filesystemtype: Digital Camera Layout (DCIM)
	Access Capability: Read-Write
	Maximum Capability: 3644981248 (3476 MB)
	Free Space (Bytes): 3641311232 (3472 MB)
	Free Space (Images): -1

Device Property Summary:
Battery Level(0x5001):(read only) (type=0x2) Range [1 - 100, step 1] value: 100% (100)
Date & Time(0x5011):(readwrite) (type=0xffff) '20110127T122034'
    Apparently, the system isn't picking-up all my memory either - I have an 8GB SD card in it (yes, it's supported).

    I also discovered something else that's kind of interesting. When I copy the "Command" above into konsole (kioclient exec camera:/) I get the following output, and a dolphin window opens with just a single file called USB Class PTP Camera in the File pane, and nothing else. When I open properties for it, it is called USB PTP Class Camera@usb:, and the path is shown thusly: Location: / (camera). It has no ownership. There is no entry for it I can find in /, or anywhere else.

    When I click on the file to view the contents, dolphin gives me an informational icon and says it is loading the drivers, then it says, "Could not read file Could not lock the device".
    This is beginning to sound a little more like a bug report (ubuntu) I found: here.
    But in that bug, apparently at least some (if not all) are able to access their camera in nautilus.

    Code:
    <unknown program name>(9605)/ ClientApp::doIt: Creating ClientApp
kioclient(9605) ClientApp::kde_open: KUrl("camera:/")
kioclient(9605) KSharedUiServerProxy::KSharedUiServerProxy: kuiserver registered
chris@desktop:~$ kioclient exec camera:/
<unknown program name>(20915)/ ClientApp::doIt: Creating ClientApp
kioclient(20915) ClientApp::kde_open: KUrl("camera:/")
kioclient(20915) KSharedUiServerProxy::KSharedUiServerProxy: kuiserver registered
    That's all I've got so far. Other than this, the only thing I've done is shut amarok off. (what's the kde equivalent to gvfs)
    MB:ASUS M3A78-EM AM2+/AM2 780G HDMI, Proc: Athlon 64 X2 5000+ Brisbane 2.6 GHz 2x512KB L2 Cache, Graph: Int. ATI Radeon HD 3200, Aud: Int. Realtek ALC1200 8 channels, Ram: 2GB Corsair XMS2 DDR2 800 SDRAM, Monitor: Dell SE198WFP 19&quot; Wide FPM
    • Top
    • Bottom

    Comment

    Previous template Next
    Working...
    X